Physics / Fizik

Permanent URI for this collectionhttps://hdl.handle.net/11147/6

Browse

Search Results

Now showing 1 - 3 of 3
  • Article
    Citation - WoS: 35
    Citation - Scopus: 35
    Cvd Graphene/Sic Uv Photodetector With Enhanced Spectral Responsivity and Response Speed
    (Elsevier, 2023) Jehad, Ala K.; Fidan, Mehmet; Ünverdi, Özhan; Çelebi, Cem
    A self-powered, high-performance graphene/Silicon Carbide (G/4H-SiC) ultraviolet Schottky junction photodetector has been fabricated, and the effect of using monolayer and bilayer graphene on the device performance parameters was investigated. P-type graphene sheets were grown by the chemical vapor deposition (CVD) method, while 4H-SiC material consists of an epilayer structure of n-/n+ on bulk n-SiC. Two photodetector devices have been studied, one with monolayer graphene (MLG) and the other with bilayer graphene (BLG). The proposed photodetector structure reveals the highest spectral responsivity known of a G/4H-SiC UV photodetector so far. Electronic and optoelectronic characterizations were done under an ultraviolet wavelength range from 240 to 350 nm. The results show two spectral responsivity maxima (Rmax) at 285 nm and 300 nm wavelengths. Exhibiting two maxima in spectral responsivity and detectivity is caused by the constructive and destructive interference effects of multiple reflections at the SiC epilayer's interfaces. The photodetector devices exhibit high spectral responsivity (R ? 0.09 AW?1), maximum detectivity (D* ? 2.9 × 1012 Jones), and minimum noise equivalent power (NEP ? 0.17 pWHz-1/2) in both devices. Using bilayer graphene instead of monolayer showed no significant change in both the photogenerated current and the spectral responsivity due to the higher absorption coefficient of bilayer graphene, however, it exhibited a significant improvement in the response speed. The response speed was found to increase by 50 % when bilayer graphene was used as a hole collecting electrode in the G/4H-SiC junction. This is because bilayer graphene creates a narrower depletion layer and higher electric field, which promotes efficient charge separation and recombination. © 2023 Elsevier B.V.
  • Article
    Citation - WoS: 22
    Citation - Scopus: 26
    Flexible Metal/Semiconductor Type Photodetectors Based on Manganese Doped Zno Nanorods
    (Elsevier, 2023) Karagöz, Emine; Altaf, Çiğdem Tuç; Yaman, Ecenaz; Yıldırım, İpek Deniz; Erdem, Emre; Çelebi, Cem; Fidan, Mehmet; Sankir, Mehmet; Demirci Sankir, Nurdan
    High-performance flexible photodetectors are one of the most interesting research areas due to their great possibilities for a variety of applications such as portable and wearable optoelectronics. This study verifies the performance of flexible metal/semiconductor/metal-type photodetector based on pristine and manganese doped ZnO nanorods (ZnO-NRs) prepared in two different concentrations of zinc precursors and manganese dopant at low temperatures. The photodetectors having ZnO-NRs with high aspect ratios were investigated by various material characterization techniques such as electron paramagnetic resonance and photoluminescence spectroscopy to confirm the relationship between defect concentrations and photodetector performance parameters. It has been calculated that the detectivity (D*) and responsivity (R) of the ZnO nanorod-based photodetectors increased 20 and 18 folds, respectively by increasing the concentration of zinc precursor. Besides the D* and R values of the photodetectors, prepared by the 16.5 mM zinc precursor, increased 18 and 4.5-fold, respectively, after manganese doping. We confirmed that even a very low concentration of zinc precursor could produce a photodetector with high performance in photo-response characteristics, flexibility, and stability against 10,000 cycles of convex/concave bending.(c) 2023 Elsevier B.V. All rights reserved.
  • Article
    Citation - WoS: 12
    Citation - Scopus: 17
    Junction Area Dependent Performance of Graphene/Silicon Based Self-Powered Schottky Photodiodes
    (Elsevier, 2021) Fidan, Mehmet; Ünverdi, Özhan; Çelebi, Cem
    This work reports the impact of junction area on the device performance parameters of Graphene/n-Silicon (Gr/n-Si) based Schottky photodiodes. Herein, three batches of Gr/n-Si photodiode samples were produced based on various sized CVD grown monolayer graphene layers transferred on individual n-Si substrates. The fabricated devices exhibited strong Schottky diode character and had high spectral sensi-tivity at 905 nm peak wavelength. The optoelectronic measurements showed that the spectral response of Gr/n-Si Schottky photodiodes has a linear dependence on the active junction area. The sample with 20 mm(2) junction area reached a spectral response of 0.76 AW(-1), which is the highest value reported in the literature for self-powered Gr/n-Si Schottky photodiodes without the modification of graphene electrode. In contrast to their spectral responsivities, the response speed of the samples were found to be lowered as a function of the junction area. The experimental results demonstrated that the device performance of Gr/n-Si Schottky photodiodes can be modified simply by changing the size of the graphene electrode on n-Si without need of external doping of graphene layer or engineering Gr/n-Si interface. This study may serve towards the standardization of junction area for the development of high performance Gr/Si based optoelectronic devices such as solar cells and photodetectors operating in between the ultraviolet and near-infrared spectral region. (C) 2021 Elsevier B.V. All rights reserved.