Physics / Fizik
Permanent URI for this collectionhttps://hdl.handle.net/11147/6
Browse
4 results
Search Results
Article Citation - WoS: 2Citation - Scopus: 2In-Situ Thin Film Copper-Copper Thermocompression Bonding for Quantum Cascade Lasers(Springer, 2021) Rouhi, Sina; Özdemir, Mehtap; Ekmekçioğlu, Merve; Yiğen, Serap; Demirhan, Yasemin; Szerling, Anna; Kosiel, Kamil; Kozubal, Maciej; Kruszka, Renata; Prokaryn, Piotr; Ertuğrul, Mehmet; Reno, John L.; Aygün, Gülnur; Özyüzer, LütfiThe choice of metals, bonding conditions and interface purity are critical parameters for the performance of metal-metal bonding quality for quantum cascade lasers (QCLs). Here, we present a novel approach for the thermocompression bonding of Cu-Cu thin films on GaAs-based waveguides without having any oxide phase, contamination or impurities at the interface. We designed a hybrid system in which magnetron sputtering of Ta, thermal evaporation of Cu and Cu-Cu thermocompression bonding processes can be performed sequentially under high vacuum conditions. GaAs/Ta/Cu and Cu/Ta/GaAs structures were thermocompressionally bonded in our in-situ homebuilt bonding system by optimizing the deposition parameters and bonding conditions. The grown thin film and the obtained interfaces were characterized using x-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy (EDX) techniques. The optimum Ta and Cu films' thicknesses were found to be about 20 nm and 500 nm, respectively. EDX analysis showed that the Ta thin film interlayer diffused into the Cu structure, providing better adhesivity and rigidity for the bonding. Additionally, no oxidation phases were detected at the interface. The best bonding quality was obtained when heated up to 430 degrees C with an applied pressure of 40 MPa during bonding process.Article Citation - WoS: 5Citation - Scopus: 5Comparison of Characteristic Properties of Al, Ga, and In-Doped Zno Thin Films Formed by Sol-Gel Method(Academic Press, 2021) Horzum, Şeyda; Bulduk, Emel; Şener, Deniz; Serin, TülayHerein, we examine the effect of doping with Indium (In), Gallium (Ga), and Aluminum (Al) (group III elements) on the structural, optical, and vibrational properties of ZnO thin films. The characteristic properties of the ZnO films prepared by the sol-gel dip-coating method are explored by utilizing X-ray diffraction, optical spectroscopy, and Raman scattering measurements. XRD analyzes exhibit that the crystallite size reduces upon doping by Ga and Al, while it increases with In, and all films have hexagonal wurtzite structure. Additionally, Raman measurements indicate that the dominant two peaks at around 104 and 445 cm(-1) are related to E(2)(low )and E-2(high) phonon modes of ZnO, respectively. The low-frequency mode (E-2(low)) is affected by dopant atoms, whereas the high-frequency mode (E-2(high)) of the wurtzite phase is not influenced by the dopant. Moreover, E-dop.atom phonon mode appears at low frequencies and the intensity ratio, I(E-dop.atom)/I(E(2)low), decreases as the ionic radius of dopant atoms increases. UV-Vis spectra reveal that the film transparency, optical band gap, Urbach energy, and refraction index can be effectively tuned by dopant atoms.Article Citation - WoS: 3Citation - Scopus: 3Compact Multilayer Thin-Film Color Filters and Direct Integration on White-Light Diodes for Color Conversion(Optical Society of America, 2021) Yiğen, Serap; Ekmekçioğlu, Merve; Özdemir, Mehtap; Aygün, Gülnur; Özyüzer, LütfiWe present highly efficient green, yellow, and red filters based on a metal-dielectric structure. The filters encompass only five layers of alternating zinc tin oxide and silver thin films that are grown on soda lime glass and white light-emitting diodes (LEDs) using direct current magnetron sputtering at room temperature. The designed filters provide efficient color filtering in the visible spectrum. High purity colored light is obtained by direct application of filters on LEDs as color converters. The presented method offers an easy way for realizing different colors by tuning the thicknesses of layers in the structure. (C) 2021 Optical Society of AmericaArticle Citation - WoS: 7Citation - Scopus: 8Investigation of the Structural and Optical Properties of Copper-Titanium Oxide Thin Films Produced by Changing the Amount of Copper(Elsevier Ltd., 2019) Horzum, Şeyda; Gürakar, Sibel; Serin, TülayWe examine how the structural, morphological and optical properties of TiO2 thin films are changed with heavily copper (Cu) content. Variations in characteristic properties of the films with 0, 12.5, 25 and 50 wt% Cu contents, grown by sol-gel dip coating method, are observed by using X-ray diffraction (XRD), Raman scattering, atomic force microscopy, energy dispersive X-ray analysis and optical spectroscopy measurements. The XRD and Raman spectra indicate that pure TiO2 film forms in the anatase structure. At high Cu concentrations, XRD results also reveal the substitution of Ti with Cu and formation of extra compound Copper-Titanium oxide. Raman measurements also show that Cu is incorporated homogeneously into TiO2 matrix up to 12.5 wt% concentration and this uniformity is distorted at higher Cu contents. In addition, optical spectroscopy measurements show that the optical band gap energy decreases from 3.26 eV to 2.05 eV with increasing Cu concentration. Furthermore, it is observed that the refractive index values obtained by means of transmittance spectra at 550 nm wavelength; increases from 2.47 to 3.39 when the Cu concentration increases from 0 to 50 wt %.