Physics / Fizik
Permanent URI for this collectionhttps://hdl.handle.net/11147/6
Browse
48 results
Search Results
Article Single Layer Res2h2: Stability, Raman Activity and Electronic Properties(Eskişehir Teknik Üniversitesi, 2018) Ünsal, Elif; Şahin, HasanIn this study, the structural, vibrational and electronic properties of the hydrogenated single layer of ReS2 are investigated byperforming the first principle calculations based on density functional theory. We found that the characteristic properties ofthe monolayer ReS2 can be manipulated upon the hydrogen functionalization. As the monolayer ReS2, the ReS2H2 hasdistorted 1T phase; however, the bonding in Re slab significantly varies with the hydrogenation. Our results demonstrate thatthe full-surface hydrogenation leads to an expansion in lattice and the Re4 tetramer-chains in the monolayer ReS2 areseparated into two dimers in the hydrogenated monolayer. It is calculated that the dynamically stable monolayer of ReS2H2has 26 Raman-active vibrational modes. Constant volume specific heat calculations are also performed and the resultsindicate that at high temperature, the monolayer ReS2 approaches to limit of 3R before the monolayer ReS2H2. By performingthe electronic band structure calculations, it is shown that when the ReS2 surface is fully hydrogenated, there occurs a directto indirect band gap transition and the semiconducting hydrogen-induced monolayer has a band gap of 0.74 eV.Article Citation - WoS: 15Citation - Scopus: 15Ag and Au Atoms Intercalated in Bilayer Heterostructures of Transition Metal Dichalcogenides and Graphene(American Institute of Physics, 2014) İyikanat, Fadıl; Şahin, Hasan; Senger, Ramazan Tuğrul; Peeters, François M.The diffusive motion of metal nanoparticles Au and Ag on monolayer and between bilayer heterostructures of transition metal dichalcogenides and graphene are investigated in the framework of density functional theory. We found that the minimum energy barriers for diffusion and the possibility of cluster formation depend strongly on both the type of nanoparticle and the type of monolayers and bilayers. Moreover, the tendency to form clusters of Ag and Au can be tuned by creating various bilayers. Tunability of the diffusion characteristics of adatoms in van der Waals heterostructures holds promise for controllable growth of nanostructures. (C) 2014 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution 3.0 Unported License.Article Citation - WoS: 24Citation - Scopus: 24Defect Tolerant and Dimension Dependent Ferromagnetism in Mnse2(Royal Society of Chemistry, 2019) Eren, İsmail; İyikanat, Fadıl; Şahin, HasanBy performing density functional theory-based calculations, we investigate the structural, vibrational, electronic and magnetic properties of 2D monolayers, nanoribbons and quantum dots of MnSe2. Vibrational spectrum analysis reveals the dynamical stability of not only ferromagnetic but also antiferromagnetic phases of single layer MnSe2 crystal structures. Electronically, calculations show that 1T-MnSe2 is a ferromagnetic structure displaying metallic behavior. It is also found that the structure preserves its dynamical stability and metallic behavior even under the presence of high density Se vacancies. Moreover, it was predicted that, differing from the 2D MnSe2, metal-metal interaction driven reconstructions result in ferromagnetic-to-antiferromagnetic crossover in the ground state of nanoribbons and quantum dots. With its robust ferromagnetic metallic character in the 2D ultra-thin limit and dimension-dependent magnetic properties, MnSe2 is an important candidate for spintronic device applications.Article Citation - WoS: 30Citation - Scopus: 29Stacking-Dependent Excitonic Properties of Bilayer Blue Phosphorene(American Physical Society, 2019) İyikanat, Fadıl; Torun, Engin; Senger, Ramazan Tuğrul; Şahin, HasanAb initio calculations in the framework of many-body perturbation theory (MBPT) are performed to calculate the electronic and optical properties of monolayer and bilayer blue phosphorene with different stacking configurations. It is found that the stacking configuration of bilayer blue phosphorene strongly affects the electronic band gap of the material. By solving the Bethe-Salpeter equation (BSE) on top of the G(0)W(0) calculation, the binding energies, spectral positions, and band decomposition of excitons of monolayer and bilayer configurations are investigated. The most prominent two excitonic peaks of bilayers are examined in detail. Our calculations show that different stacking configurations lead to distinct interlayer interaction characteristics which lead to substantial change in the optical spectrum of bilayer blue phosphorene. Mostly intralayer and mixed interlayer excitons with quite high binding energies are obtained in bilayer blue phosphorene. Our results show that excitonic properties of ultrathin materials play an important role in tuning and improving the optoelectronic performance of two-dimensional materials.Article Citation - WoS: 3Citation - Scopus: 3Hydrogenated Derivatives of Hexacoordinated Metallic Cu2si Monolayer(Royal Society of Chemistry, 2018) Ünsal, Elif; İyikanat, Fadıl; Şahin, Hasan; Senger, Ramazan TuğrulHerein, we carried out first-principles calculations based on density functional theory to investigate the effects of surface functionalization with hydrogen atoms on structural, dynamical and electronic properties of Cu2Si monolayer. Pristine Cu2Si, a metallic monolayer, has a planar hexacoordinate structure. Calculations revealed that the most favorable position of a single H atom on the Cu2Si monolayer is at the top of a Si site. Derivatives of Cu2Si monolayer with various H concentrations were investigated, and by performing phonon calculations, it was found that there are three stable hydrogenated structures. Specific heat of these monolayers was found to increase with the hydrogen concentration at temperatures higher than 100 K. Electronically, the hydrogenated derivatives of Cu2Si monolayer preserve the metallic character.Article Citation - WoS: 89Citation - Scopus: 85Cspbbr3 Perovskites: Theoretical and Experimental Investigation on Water-Assisted Transition From Nanowire Formation To Degradation(American Physical Society, 2018) Akbalı, Barış; Topçu, Gökhan; Güner, Tuğrul; Özcan, Mehmet; Demir, Mustafa Muammer; Şahin, HasanRecent advances in colloidal synthesis methods have led to an increased research focus on halide perovskites. Due to the highly ionic crystal structure of perovskite materials, a stability issue pops up, especially against polar solvents such as water. In this study, we investigate water-driven structural evolution of CsPbBr3 by performing experiments and state-of-the-art first-principles calculations. It is seen that while an optical image shows the gradual degradation of the yellowish CsPbBr3 structure under daylight, UV illumination reveals that the degradation of crystals takes place in two steps: transition from a blue-emitting to green-emitting structure and and then a transition from a green-emitting phase to complete degradation. We found that as-synthesized CsPbBr3 nanowires (NWs) emit blue light under a 254 nm UV source. Before the degradation, first, CsPbBr3 NWs undergo a water-driven structural transition to form large bundles. It is also seen that formation of such bundles provides longer-term environmental stability. In addition theoretical calculations revealed the strength of the interaction of water molecules with ligands and surfaces of CsPbBr3 and provide an atomistic-level explanation to a transition from ligand-covered NWs to bundle formation. Further interaction of green-light-emitting bundles with water causes complete degradation of CsPbBr3 and the photoluminescence signal is entirely quenched. Moreover, Raman and x-ray-diffraction measurements revealed that completely degraded regions are decomposed to PbBr2 and CsBr precursors. We believe that the findings of this study may provide further insight into the degradation mechanism of CsPbBr3 perovskite by water.Article Citation - WoS: 15Citation - Scopus: 16Monitoring the Crystal Orientation of Black-Arsenic Via Vibrational Spectra(Royal Society of Chemistry, 2019) Kandemir, Ali; İyikanat, Fadıl; Şahin, HasanIn this study, the structural, mechanical, and vibrational properties of a recently discovered anisotropic ultra-thin material, black-arsenic (b-As), are investigated by using density functional theory. Direction dependent elastic constants such as in-plane stiffness, Young's modulus and Poisson's ratio of single-layer b-As are calculated and compared with those of the structural cousin black-phosphorus (b-P). The calculated Poisson's ratio of b-As for the zigzag direction is nearly 1, which is quite higher than that of b-P, 0.65. Besides, it is found that all the three elastic constants are highly anisotropic and their values in the zigzag direction are almost three times higher than that of the armchair direction. The mechanical strength of the material is also calculated and high-toughness is seen in both armchair and zigzag directions. It is revealed that the material is quite stiff against straining along the zigzag direction; in contrast, it is quite flexible along the armchair direction. Vibrational stability analysis shows that the material is stable up to 9% biaxially applied strain, and 12% and 45% uniaxially applied strain in the zigzag and armchair directions, respectively. Furthermore, the prominent Raman active peaks of the b-As structure show strong anisotropy in the strain dependent vibrational spectra and they can also be used for easy-determination of the crystal orientation of b-As from Raman measurements.Article Citation - WoS: 36Citation - Scopus: 34Raman Fingerprint of Stacking Order in Hfs2-Ca(oh)(2) Heterobilayer(American Physical Society, 2019) Yağmurcukardeş, Mehmet; Özen, Sercan; İyikanat, Fadıl; Peeters, François M.; Şahin, HasanUsing density functional theory-based first-principles calculations, we investigate the stacking order dependence of the electronic and vibrational properties of HfS2-Ca(OH)(2) heterobilayer structures. It is shown that while the different stacking types exhibit similar electronic and optical properties, they are distinguishable from each other in terms of their vibrational properties. Our findings on the vibrational properties are the following: (i) from the interlayer shear (SM) and layer breathing (LBM) modes we are able to deduce the AB' stacking order, (ii) in addition, the AB' stacking type can also be identified via the phonon softening of E-g(I) and A(g)(III) modes which harden in the other two stacking types, and (iii) importantly, the ultrahigh frequency regime possesses distinctive properties from which we can distinguish between all stacking types. Moreover, the differences in optical and vibrational properties of various stacking types are driven by two physical effects, induced biaxial strain on the layers and the layer-layer interaction. Our results reveal that with both the phonon frequencies and corresponding activities, the Raman spectrum possesses distinctive properties for monitoring the stacking type in novel vertical heterostructures constructed by alkaline-earth-metal hydroxides.Article Citation - WoS: 15Citation - Scopus: 15Vertical van der waals heterostructure of single layer InSe and SiGe(American Chemical Society, 2019) Eren, İsmail; Özen, Sercan; Sözen, Yiğit; Yağmurcukardeş, Mehmet; Şahin, HasanWe present a first-principles investigation on the stability, electronic structure, and mechanical response of ultrathin heterostructures composed of single layers of InSe and SiGe. First, by performing total energy optimization and phonon calculations, we show that single layers of InSe and SiGe can form dynamically stable heterostructures in 12 different stacking types. Valence and conduction band edges of the heterobilayers form a type-I heterojunction having a tiny band gap ranging between 0.09 and 0.48 eV. Calculations on elastic-stiffness tensor reveal that two mechanically soft single layers form a heterostructure which is stiffer than the constituent layers because of relatively strong interlayer interaction. Moreover, phonon analysis shows that the bilayer heterostructure has highly Raman active modes at 205.3 and 43.7 cm(-1), stemming from the out-of-plane interlayer mode and layer breathing mode, respectively. Our results show that, as a stable type-I heterojunction, ultrathin heterobilayer of InSe/SiGe holds promise for nanoscale device applications.Article Citation - WoS: 17Citation - Scopus: 17Monitoring the Doping and Diffusion Characteristics of Mn Dopants in Cesium Lead Halide Perovskites(American Chemical Society, 2018) Güner, Tuğrul; Akbalı, Barış; Özcan, Mehmet; Topçu, Gökhan; Demir, Mustafa Muammer; Şahin, HasanCesium lead perovskites, in the form of CsPbX3 or Cs4PbX6, have been widely used for various optoelectronic applications due to their exceptionally good optical properties. In this study, the effect of Mn doping on the structural and optical properties of cesium lead halide perovskite crystals are investigated from both experimental and theoretical points of view. It is found that adding MnCl2 during the synthesis not only leads to a Mn-driven structural phase transition from Cs4PbBr6 to CsPbCl3 but also triggers the Br- to Cl- halide exchange. On the other hand, it is observed that, under UV illumination, the color of Mn-doped crystals changes from orange to blue in approximately 195 h. While the intensity of Mn-originated photoluminescence emission exponentially decays in time, the intensity of CsPbCl3-originated emission remains unchanged. In addition, diffusive motion of Mn ions results in both a growing population of MnO2 at the surface and transition of the host into a cesium-rich Cs4PbCl6 phase.