Physics / Fizik
Permanent URI for this collectionhttps://hdl.handle.net/11147/6
Browse
3 results
Search Results
Article Citation - WoS: 21Citation - Scopus: 24Effect of Defects and Secondary Phases in Cu2znsns4 Absorber Material on the Performance of Zn(o,s) Buffered Devices(Elsevier Ltd., 2019) Türkoğlu, Fulya; Köseoğlu, Hasan; Cantaş, Ayten; Akça, Fatime Gülşah; Meriç, Ece; Buldu, Dilara Gökçen; Aygün, GülnurCopper zinc fin sulfide (CZTS) absorber layer attracts so much attention in photovoltaic industry since it contains earth abundant, low cost and non-toxic elements contrary to other chalcogenide based solar cells. In the present work, CZTS absorber layers were prepared following a two-stage process: firstly, a stack of metal precursors (Copper (Cu)/Tin (Sn)/Zinc (Zn)/Copper (Cu)) were deposited on molybdenum (Mo) substrate by magnetron sputtering, then this stack was annealed under S atmosphere inside a tubular furnace. CZTS thin films were investigated using energy dispersive X-ray spectroscopy, X-ray diffraction, scanning electron microscopy and Raman spectroscopy. The effect of sulfurization time and the thickness of top and bottom Cu layer in precursors on the properties of CZTS thin films were investigated. The importance of Cu thickness adjacent to Sn to avoid detrimental phases was addressed. The significance of sulfurization time to restrict the Sn and Zn losses, formation of oxides such as fin dioxide and zinc oxide, and formation of molybdenum disulfide and voids between Mo/CZTS interface was also addressed. Moreover, cadmium sulfide buffer layer, which is conventionally used in CZTS solar cells, is replaced by an environmentally friendly alternative zinc oxysulfide buffer layer.Article Citation - WoS: 60Citation - Scopus: 64Improvement of Optical and Electrical Properties of Ito Thin Films by Electro-Annealing(Elsevier Ltd., 2015) Köseoğlu, Hasan; Türkoğlu, Fulya; Kurt, Metin; Yaman, Mutlu Devran; Akça, Fatime Gülşah; Aygün, Gülnur; Özyüzer, LütfiThe effect of electro-annealing in vacuum and air on the optical and electrical properties of ITO thin films grown by large area DC magnetron sputtering was investigated. Moreover, the performances of the electro-annealed ITO thin films in vacuum and air were compared. Electro-annealing was performed by applying 0.75, 1.00, 1.25 and 1.50 A constant ac current to the ITO thin films. It was observed that the crystallinity of the films was better for the ITO thin films electro-annealed in vacuum. The changes in sheet resistance of electro-annealed ITO thin films with applied currents were detailed. The transmittance of the films increased for both electro-annealing in vacuum and air. A correlation between band-gap and resistivity for all of the electro-annealed thin films was observed.Article Citation - WoS: 42Citation - Scopus: 44Growth of Cu2znsns4 Absorber Layer on Flexible Metallic Substrates for Thin Film Solar Cell Applications(Elsevier Ltd., 2015) Yazıcı, Şebnem; Olgar, Mehmet Ali; Akça, Fatime Gülşah; Cantaş, Ayten; Kurt, Metin; Aygün, Gülnur; Tarhan, Enver; Yanmaz, Ekrem; Özyüzer, LütfiIn this work, Cu2ZnSnS4 (CZTS) absorber layers were fabricated using a two-stage process. Sequentially deposited Cu-Zn-Sn thin film layers on metallic foils were annealed in an Ar + S2(g) atmosphere. We aimed to investigate the role of flexible titanium and molybdenum foil substrates in the growth mechanism of CZTS thin films. The Raman spectra and X-ray photoelectron spectroscopy analyses of the sulfurized thin films revealed that, except for the presence of Sn-based secondary phases, nearly pure CZTS thin films were obtained. Additionally, the intense and sharp X-ray diffraction peak from the (112) plane provided evidence of good crystallinity. Electron dispersive spectroscopy analysis indicated sufficient sulfur content but poor Zn atomic weight percentage in the films. Absorption and band-gap energy analyses were carried out to confirm the suitability of CZTS thin films as the absorber layer in solar cell applications. Hall effect measurements showed the p-type semiconductor behavior of the CZTS samples. Moreover, the back contact behavior of these metallic flexible substrates was investigated and compared. We detected formation of cracks in the CZTS layer on the molybdenum foils, which indicates the incompatibility of molybdenum's thermal expansion coefficient with the CZTS structure. We demonstrated the application of the magnetron sputtering technique for the fabrication of CZTS thin films on titanium foils having lightweight, flexible properties and suitable for roll-to-roll manufacturing for high throughput fabrication. Titanium foils are also cost competitive compared to molybdenum foils. © 2015 Elsevier B.V.