Physics / Fizik
Permanent URI for this collectionhttps://hdl.handle.net/11147/6
Browse
4 results
Search Results
Article Citation - WoS: 7Citation - Scopus: 7Comparative Study of Annealing and Gold Dopant Effect on Dc Sputtered Vanadium Oxide Films for Bolometer Applications(Springer Verlag, 2017) Alaboz, Hakan; Demirhan, Yasemin; Yüce, Hürriyet; Aygün, Gülnur; Özyüzer, LütfiVanadium oxide (VOx) thin film has been widely used for IR detectors and it is one of the promising materials for THz detectors due to its high temperature coefficient of resistance (TCR) values. VOx films with proper TCR values have also high resistance and it restricts bolometer performance especially for uncooled bolometers. To overcome this problem, deposition at elevated temperatures or annealing approach has been accepted and used but gold co-deposition approach has been proposed recently. In this study, vanadium oxide films were fabricated on high resistivity silicon substrates by reactive direct current magnetron sputtering in different O2/Ar atmosphere at room temperature. We investigated influence of oxygen partial pressure during deposition process and fabricated VOx thin films with sufficient TCR values for bolometer applications. In order to decrease resistivity of the deposited films, post annealing and gold doping approaches were performed separately. Effect of both post annealing process and gold doping process on structural and electrical properties of VOx thin films deposited at room temperature were investigated and detailed comparison between these methods were presented. We obtained the best possible approach to obtain optimum conditions for the highly reproducible VOx thin films which have the best resistivity and suitable TCR value for bolometer applications.Article Citation - WoS: 13Citation - Scopus: 13Fourcross Shaped Metamaterial Filters Fabricated From High Temperature Superconducting Ybco and Au Thin Films for Terahertz Waves(IOP Publishing Ltd., 2017) Demirhan, Yasemin; Alaboz, Hakan; Nebioğlu, Mehmet Ali; Mulla, B.; Akkaya, M.; Altan, Hakan; Sabah, Cumali; Özyüzer, LütfiIn this study, we present a new, unique fourcross shaped metamaterial terahertz (THz) filter fabricated from both gold thin films and YBa2Cu3O7-δ high Tc superconducting thin films. A commercial electromagnetic simulation software, CST Microwave Studio, is used to design and optimize the metamaterial filter structures. The proposed fourcross shaped rectangular filter structure consists of periodic metallic rings where strip lines are located at the sides of the ring. Fourcross metamaterial filters are fabricated by using e-beam lithography and ion beam exhing techniques. Terahertz time-domain spectroscopy measurements validated the design predictions for both the center frequencies and bandwidths of the resonances due to the fourcross structures. The resonance switching of the transmission spectra was investigated by lowering the temperature below the critical transition temperature. This resonance switching effect is not observed in filters made up of metals. This novel fourcross rectangular resonator with a temperature-dependent resonance behavior holds great potential for active, tunable and low loss THz devices for imaging, sensing, and detection applications.Article Citation - WoS: 7Citation - Scopus: 7An Indium Tin Oxide Metasurface Filter for Terahertz Applications: Design, Fabrication, and Characterization(World Scientific Publishing Co. Pte Ltd, 2017) Nebioğlu, Mehmet Ali; Takan, Taylan; Altan, Hakan; Demirhan, Yasemin; Alaboz, Hakan; Özyüzer, Lütfi; Sabah, CumaliIn this paper, using a cross-shaped complementary Indium Tin Oxide (ITO)-based metasurface design, the transmission of THz radiation is shown to be filtered within the 3 dB level from maximum in the frequency range of interest (333 GHz). Various metasurface structures primarily composed of cross-shaped openings with a 400 micron unit cell size are patterned on top of 1750 micron thick fused silica substrates. They are patterned using UV lithography methods after the films were grown using DC sputtering. The fabricated structures were characterized using Terahertz Time Domain Spectroscopy (THz-TDS) measurement technique. The measured transmission agrees well with the simulation of the structure for four different samples with different geometries. These results suggest that metasurface and/or metamaterial patterns based on ITO in visibly transparent media can be utilized for filtering of frequencies in the long wavelength spectrum. These types of filters can be very useful in the near future for THz communication and security applications. ©Article Citation - WoS: 11Citation - Scopus: 13Metal Mesh Filters Based on Ti, Ito and Cu Thin Films for Terahertz Waves(Springer Verlag, 2016) Demirhan, Yasemin; Alaboz, Hakan; Özyüzer, Lütfi; Nebioğlu, Mehmet Ali; Takan, Taylan; Altan, Hakan; Sabah, CumaliIn this study, we have investigated the spectral performance of resonant terahertz (THz) bandpass filters which were produced from thin films with a metal-mesh shape. The aforementioned filters were fabricated from titanium, copper and indium tin oxide thin films on fused silica substrates by UV lithography with an array of cross-shaped apertures. Since the mesh period, cross-arm length and its width specify the spectral characteristics of the filters, we were able to reveal the performance of these filters experimentally using both a THz time domain spectrometer and a Fourier transform infrared spectrometer. A commercial electromagnetic simulation software, CST microwave studio, was used to verify the experimental data. The transmission of the filters are in the range 20–55 % at their relevant center frequencies. To our knowledge this study is the first to show that fabricated patterns based on ITO thin films can be used to filter THz radiation.