Physics / Fizik
Permanent URI for this collectionhttps://hdl.handle.net/11147/6
Browse
5 results
Search Results
Article Citation - WoS: 24Citation - Scopus: 25Performance Enhancement of Inverted Perovskite Solar Cells Through Interface Engineering by Tpd Based Bidentate Self-Assembled Monolayers(Elsevier, 2020) Arkan, Emre; Arkan, M. Zeliha Yiğit; Ünal, Muhittin; Yalçın, Eyüp; Aydın, Hasan; Çelebi, Cem; Demic, ŞerafettinPerovskite solar cells (PSCs) have recently appeared as a promising photovoltaic technology and attracted great interest in both photovoltaic industry and academic community. Numerous active researches related to the material processing and operational aspects of device fabrication are under progress since PSCs have a great potential for attaining higher performance compared to that of other solar cell technologies. In particular, interfacial engineering is a crucial issue for obtaining high efficiency in solar cells where perovskite absorber layer is deposited between hole and electron transport layers. In inverted type architecture, PEDOT:PSS is used as both hole transport layer and surface modifier; but unfortunately, this material bears instability due to its acidic nature. Thus, self-assembled monolayers (SAMs) not only are considered as suitable alternative, but also their application is regarded as an efficient and cost effective method to modify electrode surface since it provides a robust and stable surface coverage. In this context, we have employed two novel N,N'-bis(3-methylphenyl)-N,N'-diphenylbenzidine (TPD) based SAM molecules to customize indium tin oxide (ITO) surface in inverted type PSCs. Furthermore, fine-tuning of spacer groups enables us to study device performance depending on molecular structure. This study proposes promising materials for anode interface engineering and provides a feasible approach for production of organic semiconductor based SAMs to achieve high performance PSCs.Article Citation - WoS: 28Citation - Scopus: 30P3HT-graphene bilayer electrode for Schottky junction photodetectors(IOP Publishing Ltd., 2018) Aydın, Hasan; Kalkan, Sırrı Batuhan; Varlıklı, Canan; Çelebi, CemWe have investigated the effect of a poly (3-hexylthiophene-2.5-diyl)(P3HT)-graphene bilayer electrode on the photoresponsivity characteristics of Si-based Schottky photodetectors. P3HT, which is known to be an electron donor and absorb light in the visible spectrum, was placed on CVD grown graphene by dip-coating method. The results of the UV-vis and Raman spectroscopy measurements have been evaluated to confirm the optical and electronic modification of graphene by the P3HT thin film. Current-voltage measurements of graphene/Si and P3HT-graphene/Si revealed rectification behavior confirming a Schottky junction formation at the graphene/Si interface. Time-resolved photocurrent spectroscopy measurements showed the devices had excellent durability and a fast response speed. We found that the maximum spectral photoresponsivity of the P3HT-graphene/Si photodetector increased more than three orders of magnitude compared to that of the bare graphene/Si photodetector. The observed increment in the photoresponsivity of the P3HT-graphene/Si samples was attributed to the charge transfer doping from P3HT to graphene within the spectral range between near-ultraviolet and near-infrared. Furthermore, the P3HT-graphene electrode was found to improve the specific detectivity and noise equivalent power of graphene/Si photodetectors. The obtained results showed that the P3HT-graphene bilayer electrodes significantly improved the photoresponsivity characteristics of our samples and thus can be used as a functional component in Si-based optoelectronic device applications.Article Citation - WoS: 8Citation - Scopus: 10Experimental and Computational Investigation of Graphene/Sams Schottky Diodes(Elsevier Ltd., 2018) Aydın, Hasan; Bacaksız, Cihan; Yağmurcukardeş, Nesli; Karakaya, Caner; Mermer, Ömer; Can, Mustafa; Senger, Ramazan Tuğrul; Şahin, Hasan; Selamet, YusufWe have investigated the effect of two different self-assembled monolayers (SAMs) on electrical characteristics of bilayer graphene (BLG)/n-Si Schottky diodes. Novel 4″bis(diphenylamino)-1, 1′:3″-terphenyl-5′ carboxylic acids (TPA) and 4,4-di-9H-carbazol-9-yl-1,1′:3′1′-terphenyl-5′ carboxylic acid (CAR) aromatic SAMs have been used to modify n-Si surfaces. Cyclic voltammetry (CV) and Kelvin probe force microscopy (KPFM) results have been evaluated to verify the modification of n-Si surface. The current–voltage (I–V) characteristics of bare and SAMs modified devices show rectification behaviour verifying a Schottky junction at the interface. The ideality factors (n) from ln(I)–V dependences were determined as 2.13, 1.96 and 2.07 for BLG/n-Si, BLG/TPA/n-Si and BLG/CAR/n-Si Schottky diodes, respectively. In addition, Schottky barrier height (SBH) and series resistance (R s ) of SAMs modified diodes were decreased compared to bare diode due to the formation of a compatible interface between graphene and Si as well as π–π interaction between aromatic SAMs and graphene. The CAR-based device exhibits better diode characteristic compared to the TPA-based device. Computational simulations show that the BLG/CAR system exhibits smaller energy-level-differences than the BLG/TPA, which supports the experimental findings of a lower Schottky barrier and series resistance in BLG/CAR diode.Article Citation - WoS: 4Citation - Scopus: 4Effect of Aromatic Sams Molecules on Graphene/Silicon Schottky Diode Performance(Electrochemical Society, Inc., 2016) Yağmurcukardeş, Nesli; Aydın, Hasan; Can, Mustafa; Yanılmaz, Alper; Mermer, Ömer; Okur, Salih; Selamet, YusufAu/n-Si/Graphene/Au Schottky diodes were fabricated by transferring atmospheric pressure chemical vapor deposited (APCVD) graphene on silicon substrates. Graphene/n-Si interface properties were improved by using 5-[(3-methylphenyl)(phenyl) amino]isophthalic acid (MePIFA) and 5-(diphenyl)amino]isophthalic acid (DPIFA) aromatic self-assembled monolayer (SAM) molecules. The surface morphologies of modified and non-modified films were investigated by atomic force microscopy and scanning electron microscopy. The surface potential characteristics were obtained by Kelvin-probe force microscopy and found as 0.158 V, 0.188 V and 0,383 V as a result of SAMs modification. The ideality factors of n-Si/Graphene, n-Si/MePIFA/Graphene and n-Si/DPIFA/Graphene diodes were found as 1.07, 1.13 and 1.15, respectively. Due to the chain length of aromatic organic MePIFA and DPIFA molecules, also the barrier height φB values of the devices were decreased. While the barrier height of n-Si/Graphene diode was obtained as 0.931 eV, n-Si/MePIFA/Graphene and n-Si/DPIFA/Graphene diodes have barrier height of 0.820 and 0.720 eV, respectively.Article Citation - WoS: 35Citation - Scopus: 37Modification of Ito Surface Using Aromatic Small Molecules With Carboxylic Acid Groups for Oled Applications(Elsevier Ltd., 2011) Havare, Ali Kemal; Can, Mustafa; Demiç, Şerafettin; Okur, Salih; Kuş, Mahmut; Aydın, Hasan; Yağmurcukardeş, Nesli; Tarı, Süleyman4-[(3-Methylphenyl)(phenyl)amino]benzoic acid (MPPBA) was synthesized in order to facilitate the hole-injection in Organic Light Emitting Diodes (OLED). MPPBA was applied to form self-assembled monolayer (SAM) on indium tin oxide (ITO) anode to align energy-level at the interface between organic semiconductor material (TPD) and inorganic anode (ITO) in OLED devices. The modified surface was characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and Kelvin probe force microscopy (KPFM). KPFM was used to measure the surface potential and work function between the tip and the ITO surface modified by SAM technique using MPPBA. The OLED devices (ITO/MPPBA/TPD/Alq3/Al) fabricated with SAM-modified ITO substrates showed lower turn-on voltages and enhanced diode current compare to the OLED devices fabricated with bare ITO substrates.