Physics / Fizik
Permanent URI for this collectionhttps://hdl.handle.net/11147/6
Browse
7 results
Search Results
Article Citation - WoS: 6Citation - Scopus: 5Structural and Optical Characteristics of Antimony Selenosulfide Thin Films Prepared by Two-Step Method(Springer, 2022) Türkoğlu, Fulya; Ekren, Memduh Emirhan; Cantaş, Ayten; Yakıncı, Kübra; Gündoğan, Hazal; Aygün, Gülnur; Özyüzer, LütfiAntimony triselenide (Sb2Se3) is one of the most promising absorber material choices among the inorganic semiconductors that has attracted much attention today. However, highest recorded efficiencies for Sb2Se3 solar cells are still lower than ideal. Exploring antimony selenosulfide (Sb-2(SxSe1-x)(3)) to increase device performance is one option because some features of alloyed Sb-2(SxSe1-x)(3) depend on composition such as bandgap and band position. In this study, two-step process was used to grow Sb-2(SxSe1-x)(3) thin films. In the first stage, Sb2Se3 thin films were deposited on soda lime glass substrates using direct current magnetron sputtering technique. In the second stage, Sb2Se3 thin films were exposed to sulfurization process in a quartz ampoule to obtain Sb-2(SxSe1-x)(3) thin films. Characterization results showed that morphological, optical, and structural properties of Sb-2(SxSe1-x)(3) thin films grown by presented method were highly dependent on amount of sulfur in the films. By the adjustment of the S/S + Se atomic ratio, Sb-2(SxSe1-x)(3) absorber materials with suitable bandgap, favorable orientation and compact morphology can be obtained for photovoltaic applications.Article Citation - WoS: 21Citation - Scopus: 24Effect of Defects and Secondary Phases in Cu2znsns4 Absorber Material on the Performance of Zn(o,s) Buffered Devices(Elsevier Ltd., 2019) Türkoğlu, Fulya; Köseoğlu, Hasan; Cantaş, Ayten; Akça, Fatime Gülşah; Meriç, Ece; Buldu, Dilara Gökçen; Aygün, GülnurCopper zinc fin sulfide (CZTS) absorber layer attracts so much attention in photovoltaic industry since it contains earth abundant, low cost and non-toxic elements contrary to other chalcogenide based solar cells. In the present work, CZTS absorber layers were prepared following a two-stage process: firstly, a stack of metal precursors (Copper (Cu)/Tin (Sn)/Zinc (Zn)/Copper (Cu)) were deposited on molybdenum (Mo) substrate by magnetron sputtering, then this stack was annealed under S atmosphere inside a tubular furnace. CZTS thin films were investigated using energy dispersive X-ray spectroscopy, X-ray diffraction, scanning electron microscopy and Raman spectroscopy. The effect of sulfurization time and the thickness of top and bottom Cu layer in precursors on the properties of CZTS thin films were investigated. The importance of Cu thickness adjacent to Sn to avoid detrimental phases was addressed. The significance of sulfurization time to restrict the Sn and Zn losses, formation of oxides such as fin dioxide and zinc oxide, and formation of molybdenum disulfide and voids between Mo/CZTS interface was also addressed. Moreover, cadmium sulfide buffer layer, which is conventionally used in CZTS solar cells, is replaced by an environmentally friendly alternative zinc oxysulfide buffer layer.Article Citation - WoS: 2Citation - Scopus: 3Comparision of in Situ Spectroscopic Ellipsometer and Ex Situ X-Ray Photoelectron Spectroscopy Depth Profiling Analysis of Hfo2/Hf Multilayer Structure(IOP Publishing Ltd., 2018) Cantaş, Ayten; Özyüzer, Lütfi; Aygün, GülnurA HfO2 film was grown by RF magnetron sputtering technique on a Si substrate Using in situ Spectroscopic Ellipsometry (SE), the film thickness and refractive index were examined as a function of deposition time. Ex situ x-ray Photoelectron Spectroscopy (XPS) was used in depth profile mode to determine the phase evolution of HfO2/Hf/Si multilayer structure after the growth process. The chemical composition and the crystal structure of the film were investigated by Fourier Transform Infrared (FTIR) spectroscopic measurements and x-ray Diffraction in Grazing Incidence (GI-XRD) mode, respectively. The results showed that the film was grown in the form of HfO2 film. According to SE analysis, reactive deposition of HfO2 directly on Hf/Si results to SiO2 interface of about 2 nm. The final HfO2 films thickness is 5.4 nm. After a certain period of time, the XPS depth profile revealed that the film was in the form of Hf-rich Hf silicate with SiO2 interfacial layer. In reference to XPS quantification analysis from top to bottom of film, the atomic concentration of Hf element reduces from 19.35% to 7.13%, whereas Si concentration increases from 22.99% to 74.89%. The phase change of HfO2 film with time is discussed in details.Article Citation - WoS: 10Citation - Scopus: 10In-Situ Spectroscopic Ellipsometry and Structural Study of Hfo2 Thin Films Deposited by Radio Frequency Magnetron Sputtering(American Institute of Physics, 2014) Cantaş, Ayten; Özyüzer, Gülnur Aygün; Basa, Deepak KumarWe have investigated the reduction of unwanted interfacial SiO2 layer at HfO2/Si interface brought about by the deposition of thin Hf metal buffer layer on Si substrate prior to the deposition of HfO2 thin films for possible direct contact between HfO2 thin film and Si substrate, necessary for the future generation devices based on high-κ HfO2 gate dielectrics. Reactive rf magnetron sputtering system along with the attached in-situ spectroscopic ellipsometry (SE) was used to predeposit Hf metal buffer layer as well as to grow HfO2 thin films and also to undertake the in-situ characterization of the high-κ HfO2 thin films deposited on n-type 〈100〉 crystalline silicon substrate. The formation of the unwanted interfacial SiO2 layer and its reduction due to the predeposited Hf metal buffer layer as well as the depth profiling and also structure of HfO2 thin films were investigated by in-situ SE, Fourier Transform Infrared spectroscopy, and Grazing Incidence X-ray Diffraction. The study demonstrates that the predeposited Hf metal buffer layer has played a crucial role in eliminating the formation of unwanted interfacial layer and that the deposited high-κ HfO2 thin films are crystalline although they were deposited at room temperature.Article Citation - WoS: 42Citation - Scopus: 44Growth of Cu2znsns4 Absorber Layer on Flexible Metallic Substrates for Thin Film Solar Cell Applications(Elsevier Ltd., 2015) Yazıcı, Şebnem; Olgar, Mehmet Ali; Akça, Fatime Gülşah; Cantaş, Ayten; Kurt, Metin; Aygün, Gülnur; Tarhan, Enver; Yanmaz, Ekrem; Özyüzer, LütfiIn this work, Cu2ZnSnS4 (CZTS) absorber layers were fabricated using a two-stage process. Sequentially deposited Cu-Zn-Sn thin film layers on metallic foils were annealed in an Ar + S2(g) atmosphere. We aimed to investigate the role of flexible titanium and molybdenum foil substrates in the growth mechanism of CZTS thin films. The Raman spectra and X-ray photoelectron spectroscopy analyses of the sulfurized thin films revealed that, except for the presence of Sn-based secondary phases, nearly pure CZTS thin films were obtained. Additionally, the intense and sharp X-ray diffraction peak from the (112) plane provided evidence of good crystallinity. Electron dispersive spectroscopy analysis indicated sufficient sulfur content but poor Zn atomic weight percentage in the films. Absorption and band-gap energy analyses were carried out to confirm the suitability of CZTS thin films as the absorber layer in solar cell applications. Hall effect measurements showed the p-type semiconductor behavior of the CZTS samples. Moreover, the back contact behavior of these metallic flexible substrates was investigated and compared. We detected formation of cracks in the CZTS layer on the molybdenum foils, which indicates the incompatibility of molybdenum's thermal expansion coefficient with the CZTS structure. We demonstrated the application of the magnetron sputtering technique for the fabrication of CZTS thin films on titanium foils having lightweight, flexible properties and suitable for roll-to-roll manufacturing for high throughput fabrication. Titanium foils are also cost competitive compared to molybdenum foils. © 2015 Elsevier B.V.Conference Object Citation - WoS: 33Citation - Scopus: 35Effects of Physical Growth Conditions on the Structural and Optical Properties of Sputtered Grown Thin Hfo2 Films(Elsevier Ltd., 2011) Aygün, Gülnur; Cantaş, Ayten; Şimşek, Yılmaz; Turan, RaşitHfO2 thin films were prepared by reactive DC magnetron sputtering technique on (100) p-Si substrate. The effects of O2/Ar ratio, substrate temperature, sputtering power on the structural properties of HfO2 grown films were studied by Spectroscopic Ellipsometer (SE), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectrum, and X-ray photoelectron spectroscopy (XPS) depth profiling techniques. The results show that the formation of a SiOx suboxide layer at the HfO2/Si interface is unavoidable. The HfO2 thickness and suboxide formation are highly affected by the growth parameters such as sputtering power, O 2/Ar gas ratio during sputtering, and substrate temperature. XRD spectra show that the deposited films have (111) monoclinic phase of HfO 2, which is also supported by FTIR spectra. XPS depth profiling spectra shows that highly reactive sputtered Hf atoms consume some of the oxygen atoms from the underlying SiO2 to form HfO2, leaving Si-Si bonds behind. © 2010 Elsevier B.V. All rights reserved.Article Citation - WoS: 12Citation - Scopus: 12Ge Nanocrystals Embedded in Sio2 in Mos Based Radiation Sensors(Elsevier Ltd., 2010) Aktağ, Aliekber; Yılmaz, Ercan; Mogaddam, Nader A.P.; Aygün, Gülnur; Cantaş, Ayten; Turan, RaşitIn this work, the effects of gamma radiation on the Raman spectra of Ge nanocrystals embedded in SiO2 have been investigated. SiO2 films containing nanoparticles of Ge were grown using the r.f.-magnetron sputtering technique. Formation of Ge nanocrystals was observed after high temperature annealing in an inert atmosphere and confirmed by Raman measurements. The intensity of the Raman signal originating from Ge nanocrystals was found to decrease with increasing gamma radiation. The study also includes the gamma radiation effects on MOS structure with Ge nanocrystals embedded in SiO2. The gamma radiation effects from 500 up to 4000 Gray were investigated. Capacitance-voltage measurements were performed and analyzed. Oxide traps and interface trap charges were calculated. Results show that MOS structure with Ge nanocrystals embedded in SiO2 is a good candidate to be used in radiation sensors, especially at high radiation doses. © 2010 Elsevier B.V. All rights reserved.