Physics / Fizik
Permanent URI for this collectionhttps://hdl.handle.net/11147/6
Browse
4 results
Search Results
Article Fabrication of Bi2212 Single Crystal Bolometer for Detection of Terahertz Waves(Springer Verlag, 2017) Semerci, Tuğçe; Demirhan, Yasemin; Miyakawa, Nobuaki; Wang, Huabing; Özyüzer, LütfiTerahertz (THz) radiation is in powerful region of electromagnetic spectrum because of prosperous application areas yet deficiency still exists about sources and detectors in despite of improvements of the research field in this range. This gap can be filled by focusing on development of THz detectors. Therefore, bolometers were preferred through many detectors due to detection sensitivity above 1 THz. In this study, Bi2Sr2CaCu2O8+δ (Bi2212) single crystals were used to fabricate THz bolometric detector. Bi2212 single crystals were transferred on sapphire substrate by cleavage process and e-beam lithography and ion beam etching were used to fabricate the microchip clean room facilities. Customdesigned cryogenic cryostat was used for a-b axis electrical and THz response measurements with liquid nitrogen cooled system. After electrical measurements, Bi2212 microchips detected the signals using Stefan-Boltzmann Lamp and response time were calculated. This study have shown with our experimental results that Bi2212 single crystals are potential candidates for THz bolometric detectors.Article Citation - WoS: 7Citation - Scopus: 7Comparative Study of Annealing and Gold Dopant Effect on Dc Sputtered Vanadium Oxide Films for Bolometer Applications(Springer Verlag, 2017) Alaboz, Hakan; Demirhan, Yasemin; Yüce, Hürriyet; Aygün, Gülnur; Özyüzer, LütfiVanadium oxide (VOx) thin film has been widely used for IR detectors and it is one of the promising materials for THz detectors due to its high temperature coefficient of resistance (TCR) values. VOx films with proper TCR values have also high resistance and it restricts bolometer performance especially for uncooled bolometers. To overcome this problem, deposition at elevated temperatures or annealing approach has been accepted and used but gold co-deposition approach has been proposed recently. In this study, vanadium oxide films were fabricated on high resistivity silicon substrates by reactive direct current magnetron sputtering in different O2/Ar atmosphere at room temperature. We investigated influence of oxygen partial pressure during deposition process and fabricated VOx thin films with sufficient TCR values for bolometer applications. In order to decrease resistivity of the deposited films, post annealing and gold doping approaches were performed separately. Effect of both post annealing process and gold doping process on structural and electrical properties of VOx thin films deposited at room temperature were investigated and detailed comparison between these methods were presented. We obtained the best possible approach to obtain optimum conditions for the highly reproducible VOx thin films which have the best resistivity and suitable TCR value for bolometer applications.Article Citation - WoS: 11Citation - Scopus: 13Metal Mesh Filters Based on Ti, Ito and Cu Thin Films for Terahertz Waves(Springer Verlag, 2016) Demirhan, Yasemin; Alaboz, Hakan; Özyüzer, Lütfi; Nebioğlu, Mehmet Ali; Takan, Taylan; Altan, Hakan; Sabah, CumaliIn this study, we have investigated the spectral performance of resonant terahertz (THz) bandpass filters which were produced from thin films with a metal-mesh shape. The aforementioned filters were fabricated from titanium, copper and indium tin oxide thin films on fused silica substrates by UV lithography with an array of cross-shaped apertures. Since the mesh period, cross-arm length and its width specify the spectral characteristics of the filters, we were able to reveal the performance of these filters experimentally using both a THz time domain spectrometer and a Fourier transform infrared spectrometer. A commercial electromagnetic simulation software, CST microwave studio, was used to verify the experimental data. The transmission of the filters are in the range 20–55 % at their relevant center frequencies. To our knowledge this study is the first to show that fabricated patterns based on ITO thin films can be used to filter THz radiation.Article Citation - WoS: 6Citation - Scopus: 7Thin Film Like Terahertz Bolometric Detector on Bi2212 Single Crystal(Springer Verlag, 2016) Semerci, Tuğçe; Demirhan, Yasemin; Miyakawa, Nobuaki; Wang, Huabing; Özyüzer, LütfiIn this study, we developed a microbolometer chip fabricated from high temperature superconducting Bi2Sr2CaCu2O8+δ (Bi2212) single crystals for the terahertz (THz) detection. For the manufacturing of the microbolometer chips, Bi2212 single crystals were transferred on substrate in the thin film like form and electron beam lithography, ion beam etching techniques were used. Resistance versus temperature behavior of the bolometer chips were performed by four probe technique in liquid nitrogen cryostat. Bi2212 microchips were integrated and characterized using in our custom-designed cryogenic bolometer system instead of expensive and massive cooling systems. The fabricated microchips significantly detected signals from the Stefan-Boltzmann lamp which includes a portion of THz radiation. The detected power and response time were studied for Bi2212 thin film like microbolometer chips. Our results demonstrated the feasibility of improved Bi2212 microchips could be used for bolometric detection for THz applications.