Physics / Fizik
Permanent URI for this collectionhttps://hdl.handle.net/11147/6
Browse
3 results
Search Results
Article Citation - Scopus: 1Production and Dispersion of Plasma Functionalized Carbon Nanotubes in Pan Fiber Spinning Solution With Different Surfactants(MMOB Tekstil Mühendisleri Odası, 2022) Kutlu, Bengi; Akşit, Aysun; Selamet, Yusuf; Özyüzer, Lütfi; Selamet, Yusuf; 04.05. Department of Pyhsics; 04. Faculty of Science; 01. Izmir Institute of TechnologyIn this study, the distribution of plasma-functionalized multi-walled carbon nanotubes in polyacrylonitrile nanocomposite fibers produced by wet spinning method using different surfactants (Triton-X and sodium dodecyl sulfate) was investigated. Firstly, we produced CNTs by chemical vapor deposition (CVD) technique. Secondly, low-pressure plasma functionalization of CNTs was realized. Finally, nanocomposite polyacrylonitrile fibers doped by CNTs were obtained using wet spinning technique. Properties of produced carbon nanotubes, functionalized carbon nanotubes and nanocomposite polyacrylonitrile fibers were examined by the analyses of chemical composition, surface structure, structural and mechanical properties.Article Mıknatıssal Saçtırma Sistemi ile Metal Kaplanan Polipropilen Liflerin Antistatik ve Antibakteriyel Özellikleri(TMMOB Tekstil Mühendisleri Odası, 2010) Özyüzer, Lütfi; Özyüzer, Lütfi; Meriç, Zeynep; Selamet, Yusuf; Selamet, Yusuf; Kutlu, Bengi; Cireli, Aysun; 04.05. Department of Pyhsics; 04. Faculty of Science; 01. Izmir Institute of TechnologyTekstil liflerini modifiye ederek, katma değeri yüksek, fonksiyonel teknik tekstil elde etmek için çeşitli yöntemler kullanılmaktadır. Örneğin, antistatik tekstiller, lifler içerisine iletken parçaçık katkılama ile elde edilebileceği gibi çeyreye kimyasal olarak zarar vermemesi dolayısıyla vakumda mıknatıssal saçtırma ile yüzeyi istenilen metali ince film olarak yüzeye kaplayarak da elde edilebilir. Bu çalışmada çapları 65 fim olan multifilament sentetik polipropilen liflerin yüzeyleri yüksek vakum altında nanometre kalınlığında Cr ve Ag gibi elektriksel iletken metal filmler ile kaplanmış ve elektriksel iletkenlik ve antibakteriyel özellikleri incelenmiştir.Article Citation - WoS: 266Citation - Scopus: 292High Quality Ito Thin Films Grown by Dc and Rf Sputtering Without Oxygen(IOP Publishing Ltd., 2010) Tuna, Öcal; Özyüzer, Lütfi; Selamet, Yusuf; Selamet, Yusuf; Aygün, Gülnur; Aygün, Gülnur; Özyüzer, Lütfi; 04.05. Department of Pyhsics; 04. Faculty of Science; 01. Izmir Institute of TechnologyHigh quality indium tin oxide (ITO) thin films were grown without oxygen by both dc and RF magnetron sputtering techniques on glass substrates. The effects of substrate temperature, film thickness and sputtering method on the structural, electrical and optical properties of the as-grown films were investigated. The results showed that the substrate temperature had substantial effects on the film properties, in particular on the crystallization and resistivity. When the substrate temperature was increased to 150 °C, crystallization in the (2 2 2) plane started appearing for both dc and RF sputtered films. We additionally found that with further increments of substrate temperature, the preferred crystallization orientation changed differently for dc and RF sputtered films. Optical transmission in the visible region for a film thickness of 70 nm was found to be above 85%. The bandgap was calculated to be about 3.64 eV for the substrate temperature of 150 °C for a 70 nm thick film. The value of the bandgap increased with respect to the increment in film thickness as well as substrate temperature. We also measured the temperature dependence of the resistivity and Hall coefficient of the films, and calculated the carrier concentration and Hall mobility. Very low room temperature resistivities for dc and RF magnetron sputtered grown films of about 1.28 × 10-4 Ω cm and 1.29 × 10-4 Ω cm, respectively, were obtained. © 2010 IOP Publishing Ltd.