Physics / Fizik
Permanent URI for this collectionhttps://hdl.handle.net/11147/6
Browse
5 results
Search Results
Article Citation - WoS: 3Citation - Scopus: 3Hydrogenated Derivatives of Hexacoordinated Metallic Cu2si Monolayer(Royal Society of Chemistry, 2018) Ünsal, Elif; Şahin, Hasan; Şahin, Hasan; Senger, Ramazan Tuğrul; Senger, Ramazan Tuğrul; 04.04. Department of Photonics; 04.05. Department of Pyhsics; 04. Faculty of Science; 01. Izmir Institute of TechnologyHerein, we carried out first-principles calculations based on density functional theory to investigate the effects of surface functionalization with hydrogen atoms on structural, dynamical and electronic properties of Cu2Si monolayer. Pristine Cu2Si, a metallic monolayer, has a planar hexacoordinate structure. Calculations revealed that the most favorable position of a single H atom on the Cu2Si monolayer is at the top of a Si site. Derivatives of Cu2Si monolayer with various H concentrations were investigated, and by performing phonon calculations, it was found that there are three stable hydrogenated structures. Specific heat of these monolayers was found to increase with the hydrogen concentration at temperatures higher than 100 K. Electronically, the hydrogenated derivatives of Cu2Si monolayer preserve the metallic character.Article Citation - WoS: 46Citation - Scopus: 49Tuning Electronic and Magnetic Properties of Monolayer ?-Rucl3 by In-Plane Strain(Royal Society of Chemistry, 2018) İyikanat, Fadıl; Yağmurcukardeş, Mehmet; Senger, Ramazan Tuğrul; Şahin, Hasan; Yağmurcukardeş, Mehmet; Şahin, Hasan; 04.04. Department of Photonics; 04.05. Department of Pyhsics; 04. Faculty of Science; 01. Izmir Institute of TechnologyBy employing density functional theory-based methods, the structural, vibrational, electronic, and magnetic properties of monolayer α-RuCl3 were investigated. It was demonstrated that ferromagnetic (FM) and zigzag-antiferromagnetic (ZZ-AFM) spin orders in the material have very close total energies with the latter being the ground state. We found that each Ru atom possesses a magnetic moment of 0.9 μB and the material exhibits strong magnetic anisotropy. While both phases exhibit indirect gaps, the FM phase is a magnetic semiconductor and the ZZ-AFM phase is a non-magnetic semiconductor. The structural stability of the material was confirmed by phonon calculations. Moreover, dynamical analysis revealed that the magnetic order in the material can be monitored via Raman measurements of the crystal structure. In addition, the magnetic ground state of the material changes from ZZ-AFM to FM upon certain applied strains. Valence and conduction band-edges of the material vary considerably under in-plane strains. Owing to the stable lattice structure and unique and controllable magnetic properties, monolayer α-RuCl3 is a promising material in nanoscale device applications.Article Citation - WoS: 11Citation - Scopus: 11Stable Monolayer ?-Phase of Cdte: Strain-Dependent Properties(Royal Society of Chemistry, 2017) Ünsal, Elif; Senger, Ramazan Tuğrul; Senger, Ramazan Tuğrul; Şahin, Hasan; 04.04. Department of Photonics; 04.05. Department of Pyhsics; 04. Faculty of Science; 01. Izmir Institute of TechnologyCdTe is a well known and widely used binary compound for optoelectronic applications. In this study, we propose the thinnest, free standing monolayer of CdTe which has a tetragonal-PbO (α-PbO) symmetry. The structural, electronic, vibrational and strain dependent properties are investigated by means of first principles calculations based on density functional theory. Our results demonstrate that monolayer α-CdTe is a dynamically stable and mechanically flexible material. It is found that the thinnest monolayer crystal of CdTe is a semiconductor with a direct band gap of 1.95 eV, which corresponds to red light in the visible spectrum. Moreover, it is found that the band gap can be tunable under biaxial strain. With its strain-controllable direct band gap within the visible spectrum, the stable α-phase of monolayer CdTe is a suitable candidate for optoelectronic device applications.Article Citation - WoS: 54Citation - Scopus: 53Nitrogen Doping for Facile and Effective Modification of Graphene Surfaces(Royal Society of Chemistry, 2017) Yanılmaz, Alper; Tomak, Aysel; Selamet, Yusuf; Bacaksız, Cihan; Özçeri, Elif; Arı, Ozan; Senger, Ramazan Tuğrul; Selamet, Yusuf; Tomak, Aysel; Senger, Ramazan Tuğrul; 03.01. Department of Bioengineering; 01. Izmir Institute of Technology; 04.05. Department of Pyhsics; 03. Faculty of Engineering; 04. Faculty of ScienceWe report experimental and theoretical investigations of nitrogen doped graphene. A low-pressure Chemical Vapor Deposition (CVD) system was used to grow large-area graphene on copper foil, using ethylene as the carbon source. Nitrogen-doped graphene (N-graphene) was prepared by exposing the graphene transferred to different substrates to atomic nitrogen plasma. The effect of varying nitrogen flow rates on doping of graphene was investigated while keeping the power and time constant during the process. The N-graphene was characterized via Raman Spectroscopy, X-ray Photoelectron Spectroscopy (XPS), Scanning Tunneling Microscopy and Spectroscopy (STM and STS), and Fourier Transform Infrared spectroscopy (FTIR). Raman mapping of N-graphene was also performed to show homogeneity of nitrogen on the graphitic lattice. XPS results have revealed the presence of different nitrogen configurations in the graphitic lattice with similar doping concentrations. Density functional theory (DFT) based calculations showed that the periodic adsorption of N atoms predominantly occurs on top of the C atoms rather than through substitution of C in our N-graphene samples. Our results indicate a feasible procedure for producing N-graphene with homogenous and effective doping which would be valuable in electronic and optical applications.Article Citation - WoS: 40Citation - Scopus: 40Nitrogenated, Phosphorated and Arsenicated Monolayer Holey Graphenes(Royal Society of Chemistry, 2015) Yağmurcukardeş, Mehmet; Horzum, Şeyda; Senger, Ramazan Tuğrul; Horzum, Şeyda; Yağmurcukardeş, Mehmet; 04.04. Department of Photonics; 04.05. Department of Pyhsics; 04. Faculty of Science; 01. Izmir Institute of TechnologyMotivated by a recent experiment that reported the synthesis of a new 2D material nitrogenated holey graphene (C2N) [Mahmood et al., Nat. Commun., 2015, 6, 6486], the electronic, magnetic, and mechanical properties of nitrogenated (C2N), phosphorated (C2P) and arsenicated (C2As) monolayer holey graphene structures are investigated using first-principles calculations. Our total energy calculations indicate that, similar to the C2N monolayer, the formation of the other two holey structures are also energetically feasible. Calculated cohesive energies for each monolayer show a decreasing trend going from the C2N to C2As structure. Remarkably, all the holey monolayers considered are direct band gap semiconductors. Regarding the mechanical properties (in-plane stiffness and Poisson ratio), we find that C2N has the highest in-plane stiffness and the largest Poisson ratio among the three monolayers. In addition, our calculations reveal that for the C2N, C2P and C2As monolayers, creation of N and P defects changes the semiconducting behavior to a metallic ground state while the inclusion of double H impurities in all holey structures results in magnetic ground states. As an alternative to the experimentally synthesized C2N, C2P and C2As are mechanically stable and flexible semiconductors which are important for potential applications in optoelectronics.