Physics / Fizik

Permanent URI for this collectionhttps://hdl.handle.net/11147/6

Browse

Filters

2015 - 20203

Settings

Author: search.filters.author.Yılmaz, Selahattin

Search Results

Now showing 1 - 3 of 3
  • Article
    Citation - WoS: 11
    Citation - Scopus: 13
    Effect of Cnt Incorporation on Pan/Ppy Nanofibers Synthesized by Electrospinning Method
    (TÜBİTAK, 2020) İnce Yardımcı, Atike; Tanoğlu, Metin; Yılmaz, Selahattin; Selamet, Yusuf
    In this study, carbon nanotubes (CNTs) added polyacrylonitrile/polypyrrole (PAN/PPy) electrospun nanofibers were produced. Average diameters of the nanofibers were measured as 268 and 153 nm for 10 and 25 wt% of PPy contents, respectively. A relatively higher strain to failure values (23.3%) were observed for the low PPy content. When as-grown CNTs (1 and 4 wt%) were added into the PAN/PPy blends, disordered nanofibers were observed to form within the microstructure. To improve the interfacial properties of CNTs/PAN/PPy composites, CNTs were functionalized with H2SO4/HNO3/HCl solution. The functionalized CNTs were well dispersed within the nanofibers and aligned along the direction of nanofibers. Therefore, beads formation on nanofibers decreased. The impedance of the nanofibers was found to decrease with the PPy content and CNT addition. These nanofibers had a great potential to be used as an electrochemical actuator or a tissue engineering scaffold.
  • Article
    Citation - WoS: 18
    Citation - Scopus: 17
    Cnt Incorporated Polyacrilonitrile/Polypyrrole Nanofibers as Keratinocytes Scaffold
    (Trans Tech Publications, 2019) İnce Yardımcı, Atike; Aypek, Hande; Öztürk, Özgür; Yılmaz, Selahattin; Özçivici, Engin; Meşe, Gülistan; Selamet, Yusuf
    Polypyrrole (PPy) is an attractive scaffold material for tissue engineering with its non-toxic and electrically conductive properties. There has not been enough information about PPy usage in skin tissue engineering. The aim of this study is to investigate biocompatibility of polyacrilonitrile (PAN)/PPy nanofibrous scaffold for human keratinocytes. PAN/PPy bicomponent nanofibers were prepared by electrospinning, in various PPy concentrations and with carbon nanotube (CNT) incorporation. The average diameter of electrospun nanofibers decreased with increasing PPy concentration. Further, agglomerated CNTs caused beads and disordered parts on the surface of nanofibers. Biocompatibility of these PAN/PPy and PAN/PPy/CNT scaffolds were analyzed in vitro. Both scaffolds provided adhesion and proliferation of keratinocytes. Nanofiber diameter did not significantly influence the morphology of cells. However, with increasing number of cells, cells stayed among nanofibers and this affected their shape and size. In this study, we demonstrated that PAN/PPy and PAN/PPy/CNT scaffolds enabled the growth of keratinocytes, showing their biocompatibility.
  • Article
    Citation - WoS: 28
    Citation - Scopus: 31
    The Effects of Catalyst Pretreatment, Growth Atmosphere and Temperature on Carbon Nanotube Synthesis Using Co-mo/Mgo Catalyst
    (Elsevier Ltd., 2015) İnce Yardımcı, Atike; Yılmaz, Selahattin; Selamet, Yusuf
    The growth of high quality and high yield carbon nanotubes (CNTs) by catalytic chemical vapor deposition (CVD) of CH4 over Co-Mo/MgO catalyst was investigated for different growth temperatures and H2 flow rates. It was observed that CNT yield decreased with the H2 flow rate, however, quality increased with increasing H2 flow rate. CNT yield increased for the temperatures 850-950 °C but dropped significantly above 950 °C. In this study, the highest yield of 1526% was obtained at the growth temperature of 950 °C. The optimum H2 flow rate was 200 sccm; this rate gave both high graphitization and high yield of product. Various CNT growth atmospheres including Ar, H2 and the mixture of both gases were also analyzed and it was observed that the highest quality CNTs were obtained for both pretreatment and growth carried out with H2. This gave a high yield of 292%. On the other hand, CNT growth carried out under Ar atmosphere gave higher CNT yield of 368%, however, the CNTs grown with Ar were more defective and had larger diameters. Prime novelty statement We demonstrate a sorbitol added catalysis synthesis method and importance of the ideal growth conditions to improve high quality single walled carbon nanotube yield up to 1500%.