Physics / Fizik
Permanent URI for this collectionhttps://hdl.handle.net/11147/6
Browse
37 results
Filters
Settings
Search Results
Article Citation - Scopus: 1Production and Dispersion of Plasma Functionalized Carbon Nanotubes in Pan Fiber Spinning Solution With Different Surfactants(MMOB Tekstil Mühendisleri Odası, 2022) Kutlu, Bengi; Akşit, Aysun; Özyüzer, Lütfi; Yağmurcukardeş, Nesli; Selamet, YusufIn this study, the distribution of plasma-functionalized multi-walled carbon nanotubes in polyacrylonitrile nanocomposite fibers produced by wet spinning method using different surfactants (Triton-X and sodium dodecyl sulfate) was investigated. Firstly, we produced CNTs by chemical vapor deposition (CVD) technique. Secondly, low-pressure plasma functionalization of CNTs was realized. Finally, nanocomposite polyacrylonitrile fibers doped by CNTs were obtained using wet spinning technique. Properties of produced carbon nanotubes, functionalized carbon nanotubes and nanocomposite polyacrylonitrile fibers were examined by the analyses of chemical composition, surface structure, structural and mechanical properties.Article Study of the Effect of Various Chemical Polishing Treatments on Mbe-Grown Cdte/Gaas (211)b Heterostructures(Sakarya University, 2020) Bilgilisoy, E.; Özçeri, E.; Tarhan, E.A three-inch-diameter high quality CdTe thin film was grown on a GaAs (211)B substrate by molecular beam epitaxy (MBE) in ultra-high vacuum conditions. The CdTe/GaAs (211)B heterostructure was then cut into several sample pieces. A few as-grown sample pieces were subjected to chemical etching solutions which created etch pits on the surface. The scanning electron microscopy images of such samples were used to calculate the etch pit densities on the surface. In addition, several as-grown samples were subjected to chemical polishing treatments under different conditions to quantify the removal of O and Te-O structures from the surface. Atomic force microscopy was used to determine as-grown and polished surface morphology and the polish rate of chemical solutions. A study of the surface stoichiometry and the chemical composition of the as-grown and polished CdTe (211)B surfaces were carried out by using X-ray photoelectron spectroscopy. Bulk structural qualities of the as-grown and polished samples were studied in terms of the vibrational and phonon modes via confocal Raman spectroscopy. From a comparative analyses of the results, the best chemical polishing conditions for the MBE-grown CdTe (211)B heterostructure were determined. © 2020, Sakarya University. All rights reserved.Article Investigation of Interactions of Acetylene Molecules With an Iron Nanowire and Its Effects on Mechanical Tensile Properties(Sakarya University, 2021) Aral, G.Understanding complex atomistic-scales interactions mechanisms of reactive acetylene (C2H2) molecules with reactive pure iron nanowires (Fe NWs) including its effects on the tensile mechanical properties of NWs is a crucial task in nanotechnology, especially having practical significance in the mechanical reliability, durability and stability. Therefore, we performed molecular dynamics (MD) simulations based on ReaxFF reactive force field interatomic potential model to investigate the interactions of C2H2 molecules with surface of cylindrical pure Fe NW and its fundamental effects on the tensile mechanical deformations properties of NWs at three different strain rates. Our results reveal that the chemical energetic reactions on the free surface of cylindrical Fe NW with C2H2 molecules in the gas phase form FexCyHz shell layer at temperature T=300 K. The presence of FexCyHz shell layer on the free surface of NW has a significant effect on the mechanical tensile deformation mechanism of the NWs. © 2021, Sakarya University. All rights reserved.Book Part Citation - Scopus: 1Thz Sources and Detectors Fabricated From High Temperature Superconductors(Springer, 2021) Demirhan, Yasemin; Türkoğlu, Fulya; Altan, Hakan; Sabah, Cumali; Özyüzer, LütfiHigh temperature superconductors have unique properties that can be useful in the THz region, single crystal constituted from superconducting CuO2-layers could sustain high voltages across the junctions and they are coupled through the intrinsic Josephson Effect this maintains the potential for very intense, coherent radiation which spreads over the THz gap. We investigated various experimental techniques to fabricate THz sources, bolometers and filters for efficient THz emission and detection. Rectangular mesa structures were fabricated on Bi2Sr2CaCu2O8-x (Bi2212) single crystal superconductors using standard e-beam lithography and Ar ion beam etching systems and an emitted power as high as 60 ?W at frequencies up to 0.85 THz was detected from micron sized continuous wave terahertz sources. We also fabricated bolometric microchips for THz detection purpose from Bi2212 single crystals. Bi2212 microchips detected the signals and response time were calculated, our results have clearly shown that Bi2212 single crystals are potential candidates for THz detection. The detection properties and sensitivity of bolometer chips can be further improved by integrating an antenna and filter structures. In order to investigate this we have fabricated metamaterial THz filters based on metals and YBa2Cu3Ox superconducting thin films with metal-mesh shape and a unique fourcross shape pattern. Both a THz time domain spectrometer and a Fourier transform infrared spectrometer (FTIR) were used to investigate the performance of these filters and the results were compared with simulations done with a commercially available electromagnetic simulation software. © Springer Nature B.V. 2021.Article Mıknatıssal Saçtırma Sistemi ile Metal Kaplanan Polipropilen Liflerin Antistatik ve Antibakteriyel Özellikleri(TMMOB Tekstil Mühendisleri Odası, 2010) Özyüzer, Lütfi; Meriç, Zeynep; Selamet, Yusuf; Kutlu, Bengi; Cireli, AysunTekstil liflerini modifiye ederek, katma değeri yüksek, fonksiyonel teknik tekstil elde etmek için çeşitli yöntemler kullanılmaktadır. Örneğin, antistatik tekstiller, lifler içerisine iletken parçaçık katkılama ile elde edilebileceği gibi çeyreye kimyasal olarak zarar vermemesi dolayısıyla vakumda mıknatıssal saçtırma ile yüzeyi istenilen metali ince film olarak yüzeye kaplayarak da elde edilebilir. Bu çalışmada çapları 65 fim olan multifilament sentetik polipropilen liflerin yüzeyleri yüksek vakum altında nanometre kalınlığında Cr ve Ag gibi elektriksel iletken metal filmler ile kaplanmış ve elektriksel iletkenlik ve antibakteriyel özellikleri incelenmiştir.Conference Object Citation - WoS: 7Citation - Scopus: 7Carbon Deposition on the Stainless Steels Substrates Using Pulsed Plasma(National Institute of Optoelectronics, 2008) Pat, Suat; Balbağ, Zafer; Cenik, I.; Ekem, Naci; Okur, Salih; Vladoiu, Rodica; Musa, GeavitWe have developed a generic method for carbon deposition method for any substrates from methane pulsed plasma. The generic method has been developed for carbon deposition on the stainless steels substrates using pulsed methane plasma. Pulsed plasma was produced at atmospheric pressure methane gas and room temperatures. Methane plasma was generated using with 25kV, 25kHz pulsed power supply. Discharge current approximately 300 mA. Stainless steels probes hold in the 32mm from the methane plasma. Probes dimensions were phi=30mm, h=8mm and 4 mm.Article Citation - WoS: 4The Synthesis of Ferromagnetic La0.75ca0.25mno3 Nanowires by a Sol-Gel Method(National Institute of Optoelectronics, 2010) Atalay, Funda E.; Yağmur, V.; Atalay, Selçuk; Kaya, Harun; Tarı, Süleyman; Avşar, D.In this study, densely packed La0.75Ca0.25MnO3 (LCMO) nanowires were synthesized within a porous anodic aluminum oxide (AAO) template by means of a sol-gel method using nitrate as raw material and ethylene glycol as the chelating agent. It was observed from measurements of hysteresis curves that the magnetic behavior of the LCMO nanowire arrays was strongly dependent on the pH of the solution. As it has been reported that bulk polycrystalline La0.75Ca0.25MnO3 samples have a Curie temperature of 224 K [1], it is interesting to find that nanowires produced at pH 3 show ferromagnetic properties at room temperatureArticle Multicolor Photometric Behavior of the Young Stellar Object V1704 Cygni(Bulgarian Acad Sciences, Inst Astronomy, 2018) Ibryamov, Sunay; Semkov, Evgeni; Peneva, Stoyanka; Karadeniz, UğurResults from BV RI photometric observations of the pre-main sequence star V1704 Cyg collected during the time period from August 2010 to December 2017 are presented. The star is located in the star-forming HII region IC 5070 and it exhibits photometric variability in all optical passbands. After analyzing the obtained data, V1704 Cyg is classified as a classical T Tauri star.Article Citation - WoS: 2Citation - Scopus: 2The Synthesis of Super-Hydrophilic and Hard Mgb2 Coatings as an Alternative To Electroless Nickel Coatings(Slovenska Akademia Vied, 2018) Bülbüll, Ferhat; Güney, M.; Jafarpour, SomaiyehIn this study, we report the electroless deposition using an alternative technique for the fabrication of hard and super-hydrophilic MgB2 films. MgB2 films on AZ91 magnesium alloys were prepared using an electroless bath containing magnesium diboride nanopowders, sodium hypophosphite, sodium succinate, sodium acetate, and dimethyl sulfoxide. The electroless deposition was carried out in a bath kept at a bath temperature of 95 degrees C for 60 min. After deposition, the coated samples were annealed at 300 degrees C for 60 min to investigate crystallization, morphology, and the changes in the hardness and wettability. The phase composition, morphology, the hardness, and the contact angle of produced coatings were studied by X-ray diffractometer, scanning electron microscopy, microhardness tester, and contact angle measurement system, respectively. The coatings exhibited a dense and nodular structure with strong grain connections. As-deposited and annealed MgB2 films showed an orientation with the (101) reflection, and the highest hardness value (500 HV0.01) was obtained from the annealed coating. Both synthesized coatings had a super-hydrophilic surface.Article Citation - WoS: 18Citation - Scopus: 17Cnt Incorporated Polyacrilonitrile/Polypyrrole Nanofibers as Keratinocytes Scaffold(Trans Tech Publications, 2019) İnce Yardımcı, Atike; Aypek, Hande; Öztürk, Özgür; Yılmaz, Selahattin; Özçivici, Engin; Meşe, Gülistan; Selamet, YusufPolypyrrole (PPy) is an attractive scaffold material for tissue engineering with its non-toxic and electrically conductive properties. There has not been enough information about PPy usage in skin tissue engineering. The aim of this study is to investigate biocompatibility of polyacrilonitrile (PAN)/PPy nanofibrous scaffold for human keratinocytes. PAN/PPy bicomponent nanofibers were prepared by electrospinning, in various PPy concentrations and with carbon nanotube (CNT) incorporation. The average diameter of electrospun nanofibers decreased with increasing PPy concentration. Further, agglomerated CNTs caused beads and disordered parts on the surface of nanofibers. Biocompatibility of these PAN/PPy and PAN/PPy/CNT scaffolds were analyzed in vitro. Both scaffolds provided adhesion and proliferation of keratinocytes. Nanofiber diameter did not significantly influence the morphology of cells. However, with increasing number of cells, cells stayed among nanofibers and this affected their shape and size. In this study, we demonstrated that PAN/PPy and PAN/PPy/CNT scaffolds enabled the growth of keratinocytes, showing their biocompatibility.