Physics / Fizik
Permanent URI for this collectionhttps://hdl.handle.net/11147/6
Browse
5 results
Search Results
Article Citation - WoS: 17Citation - Scopus: 17Monitoring the Doping and Diffusion Characteristics of Mn Dopants in Cesium Lead Halide Perovskites(American Chemical Society, 2018) Güner, Tuğrul; Akbalı, Barış; Özcan, Mehmet; Topçu, Gökhan; Demir, Mustafa Muammer; Şahin, HasanCesium lead perovskites, in the form of CsPbX3 or Cs4PbX6, have been widely used for various optoelectronic applications due to their exceptionally good optical properties. In this study, the effect of Mn doping on the structural and optical properties of cesium lead halide perovskite crystals are investigated from both experimental and theoretical points of view. It is found that adding MnCl2 during the synthesis not only leads to a Mn-driven structural phase transition from Cs4PbBr6 to CsPbCl3 but also triggers the Br- to Cl- halide exchange. On the other hand, it is observed that, under UV illumination, the color of Mn-doped crystals changes from orange to blue in approximately 195 h. While the intensity of Mn-originated photoluminescence emission exponentially decays in time, the intensity of CsPbCl3-originated emission remains unchanged. In addition, diffusive motion of Mn ions results in both a growing population of MnO2 at the surface and transition of the host into a cesium-rich Cs4PbCl6 phase.Article Citation - WoS: 38Citation - Scopus: 42Layered Clay/Epoxy Nanocomposites: Thermomechanical, Flame Retardancy, and Optical Properties(John Wiley and Sons Inc., 2008) Kaya, Elçin; Tanoğlu, Metin; Okur, SalihIn this study, layered clay/polymer nano-composites were developed based on epoxy resins and montmorillonite as the nanoplatelet reinforcement. Clay particles were treated with hexadecyltrimethylammonium chloride (HTCA) through an ion exchange reaction. In this way, Na+ interlay er cations of the clay is exchanged with onium cation of the surfactant that turns the hydrophilic clays (MMT) to organophilic (OMMT) characteristics. Thermal analysis results revealed that the glass transition temperature (Tg) and the dynamic mechanical properties including the storage and loss modulus of the neat epoxy resin increases by the incorporation of clay particles. It was also found that flame resistance of the polymer is improved by the addition of the clay particles.Article Citation - WoS: 6Citation - Scopus: 11Electrical and Mechanical Properties of Superconducting Mgb2/Mg Metal Matrix Composites(IOP Publishing Ltd., 2006) Eğilmez, Mehmet; Özyüzer, Lütfi; Tanoğlu, Metin; Okur, Salih; Kamer, Orhan; Öner, YıldırhanMgB2/Mg composites were prepared using a metal matrix composite fabrication method that offers the potential to produce superconducting wires as an alternative approach to the powder in tube process. To obtain composites, MgB2 and Mg powders were mixed at different weight fractions and uniaxially pressed in a cylindrical die under the pressure of 0.5 and 1.0GPa for two hours at various temperatures. The x-ray diffraction technique was used for phase identification. Temperature dependence of resistivity and magnetization measurements were carried out to determine superconducting properties. The effects of composite fabrication temperature and the addition of the Mg on the mechanical properties of MgB2/Mg composites were investigated. For this purpose, the compressive mechanical testing was performed to measure the elastic modulus and fracture strength values of the composites. It was found that the relative weight fraction of the Mg and the fabrication conditions of the composites have considerable effect on the superconducting and mechanical properties of the composites.Article Citation - WoS: 3Citation - Scopus: 4Strain Gauges of Gasb-Fega1.3 Eutectic Composites(Springer Verlag, 2004) Aliyev, M.I.; Khalilova, A. A.; Arasly, D. H.; Rahimov, R. N.; Tanoğlu, Metin; Özyüzer, LütfiA needle-shaped metallic FeGa1.3 phase oriented in a specific direction and uniformly distributed within a GaSb matrix was grown by a vertical Bridgman method. Strain-gauge characteristics, such as strain-sensitivity coefficient (S), temperature coefficient of strain sensitivity (TCS) and temperature coefficient of resistance, of GaSb and GaSb-FeGa1.3 eutectic alloy have been investigated in the range of 200 to 400 K under deformation up to strains of 1.3 × 10-3. The value of S of the GaSb-FeGa1.3 composition is measured to be 40 ± 5 and its TCS is about 0.2% deg-1 when the current is perpendicular to the needles and the needles are parallel to the plane of the gauge substrate. The strain-sensitivity characteristics are linear and hysteresis free in the investigated temperature range in the aforementioned direction. It was found that GaSb-FeGa1.3-based strain gauges possess better deformation characteristics than GaSb-based gauges.Article Citation - WoS: 10Citation - Scopus: 9Features of Electron and Phonon Processes in Gasb-Fega1.3 Eutectics(IOP Publishing Ltd., 2003) Aliyev, M. I.; Khalilova, A. A.; Arasly, D. H.; Rahimov, R. N.; Tanoğlu, Metin; Özyüzer, LütfiEutectic alloys of GaSb-FeGa1.3 were prepared by the vertical Bridgman method. A microstructure with the needle-shaped metallic FeGa1.3 phase oriented in a specific direction and uniformly distributed within the GaSb matrix was obtained. In GaSb-FeGa1.3 eutectics, the electrical and thermal conductivity, thermal diffusivity, thermoelectric power and Hall coefficients were investigated in a wide temperature range. These properties were measured at different mutual directions of current, thermal flow, magnetic field and metal phase inclusions. The influence of metallic inclusions on these properties was revealed and the distinctive characteristics of electron and phonon processes were established.