Physics / Fizik
Permanent URI for this collectionhttps://hdl.handle.net/11147/6
Browse
13 results
Search Results
Article Citation - WoS: 5Citation - Scopus: 5Differences and Similarities in Biophysical and Biological Characteristics Between U87 Mg Glioblastoma and Astrocyte Cells(Springer, 2023) Özdil, Berrin; Çalık Kocatürk, Duygu; Altunayar Ünsalan, Çisem; Açıkgöz, Eda; Oltulu, Fatih; Görgülü, Volkan; Uysal, Ayşegül; Öktem, Gülperi; Ünsalan, Ozan; Güler, Günnur; Aktuğ, HüseyinCurrent cancer studies focus on molecular-targeting diagnostics and interactions with surroundings; however, there are still gaps in characterization based on topological differences and elemental composition. Glioblastoma (GBM cells; GBMCs) is an astrocytic aggressive brain tumor. At the molecular level, GBMCs and astrocytes may differ, and cell elemental/topological analysis is critical for identifying potential new cancer targets. Here, we used U87 MG cells for GBMCS. U87 MG cell lines, which are frequently used in glioblastoma research, are an important tool for studying the various features and underlying mechanisms of this aggressive brain tumor. For the first time, atomic force microscopy (AFM), scanning electron microscopy (SEM) accompanied by energy-dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS) are used to report the topology and chemistry of cancer (U87 MG) and healthy (SVG p12) cells. In addition, F-actin staining and cytoskeleton-based gene expression analyses were performed. The degree of gene expression for genes related to the cytoskeleton was similar; however, the intensity of F-actin, anisotropy values, and invasion-related genes were different. Morphologically, GBMCs were longer and narrower while astrocytes were shorter and more disseminated based on AFM. Furthermore, the roughness values of these cells differed slightly between the two call types. In contrast to the rougher astrocyte surfaces in the lamellipodial area, SEM-EDS analysis showed that elongated GBMCs displayed filopodial protrusions. Our investigation provides considerable further insight into rapid cancer cell characterization in terms of a combinatorial spectroscopic and microscopic approach.Article Citation - WoS: 3Citation - Scopus: 4Terahertz Wavefront Engineering Using a Hard-Coded Metasurface(Springer, 2023) Noori, Aileen; Akyürek, Bora; Demirhan, Yasemin; Özyüzer, Lütfi; Güven, Kaan; Altan, Hakan; Aygün, GülnurDuring the past few years, coding metamaterials (MM) drew significant attention, where the far-field scattering/transmission pattern of the electromagnetic wave (particularly in the THz regime) can be encoded into a single or few-bit digitized phase-response of the metasurface, thereby enabling a full digital control. Single-bit MMs contain two types of unit cells where the phase becomes 0 and 1 (in units of ?), respectively. By arranging these unit cells into a 2D surface pattern, the THz wavefront can be shaped. In this work, a novel hard-coded metasurface was designed, fabricated, and experimentally investigated for multi-beam reflection of incident THz beam. The design employs stripe and checkerboard patterns of bilayer MM unit cells consisting of square gold patches with a polymer spacing layer from a gold backplane. Experimental and simulation results show that the incident wave in the 0.500–0.750 THz range can be reflected with > 95% efficiency in uniform amplitude and 1-bit coded phase. For the checkerboard metasurface pattern, the measured and analytically calculated reflection angle shows good agreement. The metasurface design is suitable for large-scale fabrication and can potentially be used as a template in the development of actively coded metasurfaces. © 2023, The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.Article Citation - WoS: 39Citation - Scopus: 48Analysis of the Cp Structure of the Yukawa Coupling Between the Higgs Boson and Tau Leptons in Proton-Proton Collisions at Root S=13 Tev(Springer, 2022) Tumasyan, A.; Adam, W.; Andrejkovic, J. W.; Bergauer, T.; Chatterjee, S.; Dragicevic, M.; Del Valle, A. EscalanteThe first measurement of the CP structure of the Yukawa coupling between the Higgs boson and tau leptons is presented. The measurement is based on data collected in proton-proton collisions at root s = 13 TeV by the CMS detector at the LHC, corresponding to an integrated luminosity of 137 fb(-1). The analysis uses the angular correlation between the decay planes of tau leptons produced in Higgs boson decays. The effective mixing angle between CP-even and CP-odd tau Yukawa couplings is found to be -1 +/- 19 degrees, compared to an expected value of 0 +/- 21 degrees at the 68.3% confidence level. The data disfavour the pure CP-odd scenario at 3.0 standard deviations. The results are compatible with predictions for the standard model Higgs boson.Article Citation - WoS: 6Citation - Scopus: 5Structural and Optical Characteristics of Antimony Selenosulfide Thin Films Prepared by Two-Step Method(Springer, 2022) Türkoğlu, Fulya; Ekren, Memduh Emirhan; Cantaş, Ayten; Yakıncı, Kübra; Gündoğan, Hazal; Aygün, Gülnur; Özyüzer, LütfiAntimony triselenide (Sb2Se3) is one of the most promising absorber material choices among the inorganic semiconductors that has attracted much attention today. However, highest recorded efficiencies for Sb2Se3 solar cells are still lower than ideal. Exploring antimony selenosulfide (Sb-2(SxSe1-x)(3)) to increase device performance is one option because some features of alloyed Sb-2(SxSe1-x)(3) depend on composition such as bandgap and band position. In this study, two-step process was used to grow Sb-2(SxSe1-x)(3) thin films. In the first stage, Sb2Se3 thin films were deposited on soda lime glass substrates using direct current magnetron sputtering technique. In the second stage, Sb2Se3 thin films were exposed to sulfurization process in a quartz ampoule to obtain Sb-2(SxSe1-x)(3) thin films. Characterization results showed that morphological, optical, and structural properties of Sb-2(SxSe1-x)(3) thin films grown by presented method were highly dependent on amount of sulfur in the films. By the adjustment of the S/S + Se atomic ratio, Sb-2(SxSe1-x)(3) absorber materials with suitable bandgap, favorable orientation and compact morphology can be obtained for photovoltaic applications.Correction Correction To: “curved Space and Particle Physics Effects on the Formation of Bose–einstein Condensation Around a Reissner–nordstrøm Black Hole”(Springer, 2022) Erdem, Recai; Demirkaya, Betül; Gültekin, KemalAfter this correction Fig. 1 in [1] is replaced by Fig. 1 above which is essentially the same as the one in [1]. Figure 2 in [1] now becomes irrelevant. Figure 3 in [1] is replaced by Fig. 2 above which is essentially the same as the one in [1].Article Citation - WoS: 2Citation - Scopus: 2In-Situ Thin Film Copper-Copper Thermocompression Bonding for Quantum Cascade Lasers(Springer, 2021) Rouhi, Sina; Özdemir, Mehtap; Ekmekçioğlu, Merve; Yiğen, Serap; Demirhan, Yasemin; Szerling, Anna; Kosiel, Kamil; Kozubal, Maciej; Kruszka, Renata; Prokaryn, Piotr; Ertuğrul, Mehmet; Reno, John L.; Aygün, Gülnur; Özyüzer, LütfiThe choice of metals, bonding conditions and interface purity are critical parameters for the performance of metal-metal bonding quality for quantum cascade lasers (QCLs). Here, we present a novel approach for the thermocompression bonding of Cu-Cu thin films on GaAs-based waveguides without having any oxide phase, contamination or impurities at the interface. We designed a hybrid system in which magnetron sputtering of Ta, thermal evaporation of Cu and Cu-Cu thermocompression bonding processes can be performed sequentially under high vacuum conditions. GaAs/Ta/Cu and Cu/Ta/GaAs structures were thermocompressionally bonded in our in-situ homebuilt bonding system by optimizing the deposition parameters and bonding conditions. The grown thin film and the obtained interfaces were characterized using x-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy (EDX) techniques. The optimum Ta and Cu films' thicknesses were found to be about 20 nm and 500 nm, respectively. EDX analysis showed that the Ta thin film interlayer diffused into the Cu structure, providing better adhesivity and rigidity for the bonding. Additionally, no oxidation phases were detected at the interface. The best bonding quality was obtained when heated up to 430 degrees C with an applied pressure of 40 MPa during bonding process.Article Citation - WoS: 2Citation - Scopus: 2Curved Space and Particle Physics Effects on the Formation of Bose-Einstein Condensation Around a Reissner-Nordstrom Black Hole(Springer, 2021) Erdem, Recai; Demirkaya, Betül; Gültekin, KemalWe consider two scalar fields interacting through a chi*chi phi*phi term in the presence of a Reissner-Nordstrom black hole. Initially, only chi particles are present. We find that the produced phi particles are localized in a region around the black hole and have a tendency toward condensation provided that phi particles are much heavier than the chi particles. We also find that such a configuration is phenomenologically viable only if the scalars and the black hole have dark electric charges.Article Citation - WoS: 2Citation - Scopus: 2Particle Physics Processes in Cosmology Through an Effective Minkowski Space Formulation and the Limitations of the Method(Springer, 2021) Erdem, Recai; Gültekin, KemalWe introduce a method where particle physics processes in cosmology may be calculated by the usual perturbative flat space quantum field theory through an effective Minkowski space description at small time intervals provided that the running of the effective particle masses are sufficiently slow. We discuss the necessary conditions for the applicability of this method and illustrate the method through a simple example. This method has the advantage of avoiding the effects of gravitational particle creation in the calculation of rates and cross sections i.e. giving directly the rates and the cross sections due to the scatterings or the decay processes.Conference Object Native and Light Induced Defect States in Wide Band Gap Hydrogenated Amorphous Silicon-Carbon (a-Si1 : H) Alloy Thin Films(Springer, 1997) Güneş, MehmetIn this study, wide band gap a-Si1-x C-x:H alloy thin films prepared with and without hydrogen diluation of (SiH4, CH4) were characterized using optical absorption, dark conductivity, steady-state photoconductivity, sub-bandgap absorption obtained with both photothermal deflection spectroscopy (PDS) and dual beam photoconductivity (DBP), and electron spin resonance (ESR) techniques. Experimental results of steady-state photoconductivity and sub-bandgap absorption for different generation rates were analyzed using a detailed numerical model based on Simmons-Taylor statistics. The densities, energy location and nature of the native and light induced defect states in diluted and undiluted a-Si1-xCx:H alloy thin films were derived from the best fits to the experimental data. The extracted parameters for defect states were compared with those of a-Si:H films both in the annealed and light degraded states.Article Citation - WoS: 9Citation - Scopus: 7Epitaxial Characteristics of Mbe-Grown Znte Thin Films on Gaas (211)b Substrates(Springer, 2019) Özçeri, Elif; Tarhan, EnverHighly crystalline ZnTe thin films were grown on GaAs (211)B substrates by molecular beam epitaxy (MBE) for potential applications such as MCT detectors and optoelectronic devices. We investigated the effects of Te to Zn (VI/II) flux ratio on the quality of ZnTe films in terms of crystal orientation, elemental composition, surface roughness, and dislocation density. Atomic concentrations of Zn, Te, and oxygen complexes due to oxygen contamination on the film surfaces were analyzed by X-ray photoelectron spectroscopy. X-ray double crystal rocking curve full width half maximum (FWHM) of ZnTe (422) peak was observed as 233 arcseconds for a 1.66 mu m thick film, which indicates high crystallinity. Wet chemical etching was applied to the films to quantify the crystal quality by calculating etch pit densities (EPD) from scanning electron microscope images. A very low EPD value of 1.7 x 10(7) cm(-2) was measured. Additionally, the root mean square roughness values, obtained from atomic force microscopy topography images were in the range of 10-25 nm. These values were supported by FWHM values of red green blue color intensity histograms obtained from Nomarski Microscope images. The results of our analyses indicate that the VI/II flux ratios of 4 and 4.5 produce the best quality ZnTe films on GaAs (211)B substrates.