GCRIS

Now showing 1 - 3 of 3

Citation - WoS: 22
Citation - Scopus: 22
Zinc Oxide and Metal Halide Perovskite Nanostructures Having Tunable Morphologies Grown by Nanosecond Laser Ablation for Light-Emitting Devices
(American Chemical Society, 2020) Demirci Sankir, Nurdan; Abdullayeva, Nazrin; Altaf, Çiğdem Tuç; Kumtepe, Alihan; Yılmaz, Nazmi; Coşkun, Özlem; Sankir, Mehmet; Kurt, Hamza; Çelebi, Cem; Yanılmaz, Alper
This work reports a one-pot chemical bath deposition (CBD) method for the preparation of selectively grown, morphology-tunable zinc oxide (ZnO) nanostructures provided via straightforward nanosecond fiber laser ablation. Nanosecond fiber laser ablation is different from lithographic methods due to its simple, time saving, and efficient film scribing abilities. Here, multiple morphologies of the ZnO nanostructures on the same substrate have been grown via laser ablation of the ZnO seeding layer. Selective and controlled ablation of the titanium layer, ZnO growth inhibitor, resulted in systematic growth of nanorod arrays, while the application of extensive fluence energies resulted in the penetration of the laser beam until the glass substrate induced the nanoflake growth within the same CBD environment. The laser penetration depth has been numerically investigated via COMSOL Multiphysics heat module simulations, and the optical variations between two nanostructures (nanorod and nanoflake) have been examined via Lumerical FDTD. The simultaneous growth of two morphologies served as an efficient tool for the enhancement of photoluminescence intensities. It increased the average charge carrier lifetimes of the thin films from approximately 2.01 to 9.07 ns under the same excitation wavelengths. The amplification in PL performances has been accomplished via the capstone of all-inorganic halide perovskite (IHP) deposition that brought a successful conclusion to lifetime responses, which have been increased by 1.4-fold. The development of IHP sensitized nanoscaled multimorphological ZnO thin films can, therefore, be used as potential nanomaterials for light-emitting-device applications. © 2020 American Chemical Society.
Citation - WoS: 60
Citation - Scopus: 66
Preparation and Characterization of Calcium Stearate Powders and Films Prepared by Precipitation and Langmuir-Blodgett Techniques
(American Chemical Society, 2010) Gönen, Mehmet; Öztürk, Serdar; Balköse, Devrim; Okur, Salih; Ülkü, Semra
The preparation of calcium stearate (CaSt2) using precipitation and Langmuir-Blodgett techniques was investigated in this study. While sodium stearate and calcium chloride were used in the precipitation process, calcium stearate nanofilms were produced from stearic acid and calcium chloride in sodium borate buffer with the Langmuir-Blodgett technique. Fourier transform infrared (FTIR) spectroscopy indicated carboxylate bands at 1577 and 1543 cm-1 in equal intensity in the powder form, but the films had a higher intensity 1577 cm-1 band than the 1543 cm-1 band. This showed the calcium ions associated with the COO- ions in the monodendate and bidendate structures in powders, and it was mainly in the bidendate structure in films. While characteristic peaks of CaSt2 at 2θ values of 6.40° and 19.58° were obtained in the X-ray diffraction (XRD) pattern of the dried powdered product, no sharp peaks were present in the 13 layer CaSt2 film. From scanning electron microscopy (SEM) micrographs, it was seen that calcium stearate powder had lamellar structure and the average particle size was 600 nm. The AFM picture of the CaSt2 film indicated the surface was not smooth with a peak to valley distance of 6 nm. © 2010 American Chemical Society.
Citation - WoS: 36
Citation - Scopus: 38
Humidity Sensing Properties of Cds Nanoparticles Synthesized by Chemical Bath Deposition Method
(American Chemical Society, 2011) Demir, Ramazan; Okur, Salih; Şeker, Mavişe; Zor, Muhsin
Thin films of CdS nanoparticles were synthesized by the chemical bath deposition (CBD) technique to investigate humidity response characteristics. The morphology and the crystal structure of CdS thin films were investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD), respectively. The quartz crystal microbalance (QCM) technique was used to measure the water vapor adsorption and desorption rates of CdS thin films. The dynamic Langmuir model was used to analyze the kinetics of the moisture adsorption and desorption process under relative humidity (RH) between 17 and 85% RH. Our results indicate that CdS thin films have a great affinity to humidity at room temperature.

Physics / Fizik

Browse

Filters

Settings

Sort By

Results per page

Search Results