Physics / Fizik
Permanent URI for this collectionhttps://hdl.handle.net/11147/6
Browse
10 results
Search Results
Article Citation - WoS: 3Citation - Scopus: 3Stable Single Layer Structures of Aluminum Oxide: Vibrational and Electronic Characterization of Magnetic Phases(Elsevier, 2022) Özyurt, A. Kutay; Molavali, Deniz; Şahin, HasanThe structural, magnetic, vibrational and electronic properties of single layer aluminum oxide (AlO2) are investigated by performing state-of-the-art first-principles calculations. Total energy optimization and phonon calculations reveal that aluminum oxide forms a distorted octahedral structure (1T′-AlO2) in its single layer limit. It is also shown that surfaces of 1T′-AlO2 display magnetic behavior originating from the O atoms. While the ferromagnetic (FM) state is the most favorable magnetic order for 1T′-AlO2, transformation to a dynamically stable antiferromagnetic (AFM) state upon a slight distortion in the crystal structure is also possible. It is also shown that Raman activities (350–400 cm−1) obtained from the vibrational spectrum can be utilized to distinguish the possible magnetic phases of the crystal structure. Electronically, both FM and the AFM phases are semiconductors with an indirect band gap and they can form a type-III vdW heterojunction with graphene-like ultra-thin materials. Moreover, it is predicted that presence of oxygen defects that inevitably occur during synthesis and production do not alter the magnetic state, even at high vacancy density. Apparently, ultra-thin 1T′-AlO2 with its stable crystal structure, semiconducting nature and robust magnetic state is a quite promising material for nanoscale device applications.Article Citation - WoS: 11Citation - Scopus: 10Intercalation Leads To Inverse Layer Dependence of Friction on Chemically Doped Mos2(IOP Publishing, 2023) Açıkgöz, Oğulcan; Guerrero, Enrique; Yanılmaz, Alper; Dağdeviren, Ömür E.; Çelebi, Cem; Strubbe, David A.; Baykara, Mehmet Z.We present results of atomic-force-microscopy-based friction measurements on Re-doped molybdenum disulfide (MoS2). In stark contrast to the widespread observation of decreasing friction with increasing number of layers on two-dimensional (2D) materials, friction on Re-doped MoS2 exhibits an anomalous, i.e. inverse, dependence on the number of layers. Raman spectroscopy measurements combined with ab initio calculations reveal signatures of Re intercalation. Calculations suggest an increase in out-of-plane stiffness that inversely correlates with the number of layers as the physical mechanism behind this remarkable observation, revealing a distinctive regime of puckering for 2D materials.Article Citation - WoS: 5Citation - Scopus: 6Tuning the Structural, Electronic and Dynamical Properties of Janus M4x3y3 (m = Pd, Ni and Co; X,y = S, Se and Te) Monolayers: a Dft Study(Royal Society of Chemistry, 2021) Eren, İsmail; Akgenç, BernaBased on density functional theory, the structural, electronic and vibrational properties of two-dimensional transition metal chalcogenides M2X3 and their Janus type M4X3Y3, where M = Pd, Co and Ni and X = Se, S and Te, are investigated. Motivated by the successful synthesis of a 2D Pd2Se3 monolayer and the proof of the dynamical stability of Ni2Se3 and Co2Se3 monolayers, in terms of the phonon band dispersions, we have systemically studied the fundamental physical properties of Janus transition metal chalcogenides, such as their structural, phonon and thermodynamic stability and their electronic and mechanical properties. Our results show that Janus structures of M4X3Y3 are energetically favorable and dynamically stable. The ab initio molecular dynamic simulations (AIMD) results clearly prove that they kept their thermal stability at room temperature. We have demonstrated their structural, electronic and vibrational properties and Raman spectra. The electronic band dispersions show that monolayer Co2Se3 shows half-metal properties with a moderate band gap (1.01 eV), Pd2Se3 has a 1.42 eV direct band gap, while Ni2Se3 has a 1.38 eV indirect band gap. Pd4Se3S3, Pd4Se3Te3 and Pd4S3Te3 are indirect band gap semiconductors with band gaps of 1.22 eV, 1.05 eV and 0.61 eV, respectively. Ni4Se3S3, Ni4Se3Te3 and Ni4S3Te3 are indirect band gap semiconductors with band gaps of 1.61 eV, 0.77 eV and 0.49 eV, respectively. While pristine Co2Se3 is shown to have half-metallicity (HM), the HM behaviour of the Janus Co4Se3Te3 and Co4S3Te3 monolayers disappear and Co4Se3S3 remains a HM with a moderate band gap of 0.85 eV. In addition, the Raman spectra of these Janus materials are shown to exhibit totally distinctive features as compared to those of the pristine materials. This work reveals the important material properties of Janus type M4X3Y3 monolayers, where M = Pd, Co and Ni and X = Se, S and Te, which could have wide applications in new functional devices.Article Citation - WoS: 13Citation - Scopus: 12Orthorhombic Cspbi3 Perovskites: Thickness-Dependent Structural, Optical and Vibrational Properties(Elsevier, 2020) Özen, Sercan; İyikanat, Fadıl; Özcan, Mehmet; Tekneci, Gülsüm Efsun; Eren, İsmail; Sözen, Yiğit; Şahin, HasanCesium lead halide perovskites have been subject to intense investigation, mostly because of their potential to be used in optoelectronic device applications. However, regarding the need for nanoscale materials in forthcoming nanotechnology applications, understanding of how the characteristic properties of these perovskite crystals are modified through dimensional crossover is essential. In this study, thickness-dependence of the structural, electronic and vibrational properties of orthorhombic CsPbI3, which is one of the most stable phase at room temperature, is investigated by means of state-of-the-art first-principles calculations. Our results show that (i) bilayers and monolayers of CsPbI3 can be stabilized in orthorhombic crystal symmetry, (ii) among; the possible ultra-thin perovskites only structures with CsI-terminated surface are dynamically stable (iii) electronic band gap increases with decrease in perovskite thickness due to quantum size effect and (iv) reflectivity and transmissivity of the orthorhombic CsPbI3 can be tuned by varying the thickness that modifies the electron confinement. (c) 2019 Elsevier B.V. All rights reserved.Article Citation - WoS: 6Citation - Scopus: 6Few-Layer Mos2 as Nitrogen Protective Barrier(IOP Publishing Ltd., 2017) Akbalı, Barış; Yanılmaz, Alper; Tomak, Aysel; Tongay, Sefaattin; Çelebi, Cem; Şahin, HasanWe report experimental and theoretical investigations of the observed barrier behavior of few-layer MoS2 against nitrogenation. Owing to its low-strength shearing, low friction coefficient, and high lubricity, MoS2 exhibits the demeanor of a natural N-resistant coating material. Raman spectroscopy is done to determine the coating capability of MoS2 on graphene. Surface morphology of our MoS2/graphene heterostructure is characterized by using optical microscopy, scanning electron microscopy, and atomic force microscopy. In addition, density functional theory-based calculations are performed to understand the energy barrier performance of MoS2 against nitrogenation. The penetration of nitrogen atoms through a defect-free MoS2 layer is prevented by a very high vertical diffusion barrier, indicating that MoS2 can serve as a protective layer for the nitrogenation of graphene. Our experimental and theoretical results show that MoS2 material can be used both as an efficient nanocoating material and as a nanoscale mask for selective nitrogenation of graphene layer.Article Citation - WoS: 3Citation - Scopus: 2?-Silicene as Oxidation-Resistant Ultra-Thin Coating Material(Beilstein-Institut Zur Forderung der Chemischen Wissenschaften, 2017) Kandemir, Ali; İyikanat, Fadıl; Bacaksız, Cihan; Şahin, HasanBy performing density functional theory (DFT)-based calculations, the performance of a-silicene as oxidation-resistant coating on Ag(111) surface is investigated. First of all, it is shown that the Ag(111) surface is quite reactive against O atoms and O2 molecules. It is known that when single-layer silicene is formed on the Ag(111) surface, the 3 × 3-reconstructed phase, a-silicene, is the ground state. Our investigation reveals that as a coating layer, a-silicene (i) strongly absorbs single O atoms and (ii) absorbs O2 molecules by breaking the strong O-O bond. (iii) Even the hollow sites, which are found to be most favorable penetration path for oxygens, serves as high-energy oxidation barrier, and (iv) α-silicene becomes more protective and less permeable in the presence of absorbed O atom. It appears that single-layer silicene is a quite promising material for ultra-thin oxidation-protective coating applications.Article Citation - WoS: 1Citation - Scopus: 1Adsorption and Diffusion Characteristics of Lithium on Hydrogenated ?- and Ss-Silicene(Beilstein-Institut Zur Forderung der Chemischen Wissenschaften, 2017) İyikanat, Fadıl; Kandemir, Ali; Bacaksız, Cihan; Şahin, HasanUsing first-principles density functional theory calculations, we investigate adsorption properties and the diffusion mechanism of a Li atom on hydrogenated single-layer α- and β-silicene on a Ag(111) surface. It is found that a Li atom binds strongly on the surfaces of both α- and β-silicene, and it forms an ionic bond through the transfer of charge from the adsorbed atom to the surface. The binding energies of a Li atom on these surfaces are very similar. However, the diffusion barrier of a Li atom on H-α-Si is much higher than that on H-β-Si. The energy surface calculations show that a Li atom does not prefer to bind in the vicinity of the hydrogenated upper-Si atoms. Strong interaction between Li atoms and hydrogenated silicene phases and low diffusion barriers show that α- and β-silicene are promising platforms for Li-storage applications.Article Citation - WoS: 23Citation - Scopus: 25H-Aln Van Der Waals Bilayer Heterostructure: Tuning the Excitonic Characteristics(American Physical Society, 2017) Bacaksız, Cihan; Dominguez, A.; Rubio, A.; Senger, Ramazan Tuğrul; Şahin, HasanMotivated by recent studies that reported the successful synthesis of monolayer Mg(OH)2 [Suslu, Sci. Rep. 6, 20525 (2016)2045-232210.1038/srep20525] and hexagonal (h-)AlN [Tsipas, Appl. Phys. Lett. 103, 251605 (2013)APPLAB0003-695110.1063/1.4851239], we investigate structural, electronic, and optical properties of vertically stacked h-AlN and Mg(OH)2, through ab initio density-functional theory (DFT), many-body quasiparticle calculations within the GW approximation and the Bethe-Salpeter equation (BSE). It is obtained that the bilayer heterostructure prefers the AB′ stacking having direct band gap at the Γ with Type-II band alignment in which the valance band maximum and conduction band minimum originate from different layer. Regarding the optical properties, the imaginary part of the dielectric function of the individual layers and heterobilayer are investigated. The heterobilayer possesses excitonic peaks, which appear only after the construction of the heterobilayer. The lowest three exciton peaks are analyzed in detail by means of band decomposed charge density and the oscillator strength. Furthermore, the wave function calculation shows that the first peak of the heterobilayer originates from spatially indirect exciton where the electron and hole localized at h-AlN and Mg(OH)2, respectively, which is important for the light harvesting applications.Article Citation - WoS: 2Citation - Scopus: 2Structural Changes in a Schiff Base Molecular Assembly Initiated by Scanning Tunneling Microscopy Tip(IOP Publishing Ltd., 2016) Tomak, Aysel; Bacaksız, Cihan; Mendirek, Gizem; Şahin, Hasan; Hür, Deniz; Görgün, Kamuran; Senger, Ramazan Tuğrul; Birer, Özgür; Peeters, François M.; Zareie, Hadi M.We report the controlled self-organization and switching of newly designed Schiff base (E)-4-((4-(phenylethynyl) benzylidene) amino) benzenethiol (EPBB) molecules on a Au (111) surface at room temperature. Scanning tunneling microscopy and spectroscopy (STM/STS) were used to image and analyze the conformational changes of the EPBB molecules. The conformational change of the molecules was induced by using the STM tip while increasing the tunneling current. The switching of a domain or island of molecules was shown to be induced by the STM tip during scanning. Unambiguous fingerprints of the switching mechanism were observed via STM/STS measurements. Surface-enhanced Raman scattering was employed, to control and identify quantitatively the switching mechanism of molecules in a monolayer. Density functional theory calculations were also performed in order to understand the microscopic details of the switching mechanism. These calculations revealed that the molecular switching behavior stemmed from the strong interaction of the EPBB molecules with the STM tip. Our approach to controlling intermolecular mechanics provides a path towards the bottom-up assembly of more sophisticated molecular machines.Article Citation - WoS: 57Citation - Scopus: 61Electronic and Optical Properties of Bilayer Blue Phosphorus(Elsevier Ltd., 2016) Moğulkoç, Yeşim; Modarresi, Mohsen; Moğulkoç, Aybey; Çiftci, YaseminWe investigate the electronic and optical properties of monolayer and stacking dependent bilayer blue phosphorus in the framework of density functional theory (DFT) and tight-binding approximations. We extract the hopping parameters of TB Hamiltonian for monolayer and bilayer blue phosphorus by using the DFT results. The variation of energy band gap with applied external electric field for two different stacks of bilayer blue phosphorus are also shown. We examine the linear response of the systems due to the external electromagnetic radiation in terms of the dielectric functions in the DFT theory. The relatively large electronic band gap and possibility of exfoliation form bulk structure due to weak interlayer coupling, make blue phosphorus an appropriate candidate for future electronic devices.