Physics / Fizik
Permanent URI for this collectionhttps://hdl.handle.net/11147/6
Browse
17 results
Search Results
Conference Object Citation - WoS: 7Citation - Scopus: 7Carbon Deposition on the Stainless Steels Substrates Using Pulsed Plasma(National Institute of Optoelectronics, 2008) Pat, Suat; Balbağ, Zafer; Cenik, I.; Ekem, Naci; Okur, Salih; Vladoiu, Rodica; Musa, GeavitWe have developed a generic method for carbon deposition method for any substrates from methane pulsed plasma. The generic method has been developed for carbon deposition on the stainless steels substrates using pulsed methane plasma. Pulsed plasma was produced at atmospheric pressure methane gas and room temperatures. Methane plasma was generated using with 25kV, 25kHz pulsed power supply. Discharge current approximately 300 mA. Stainless steels probes hold in the 32mm from the methane plasma. Probes dimensions were phi=30mm, h=8mm and 4 mm.Article Citation - WoS: 4The Synthesis of Ferromagnetic La0.75ca0.25mno3 Nanowires by a Sol-Gel Method(National Institute of Optoelectronics, 2010) Atalay, Funda E.; Yağmur, V.; Atalay, Selçuk; Kaya, Harun; Tarı, Süleyman; Avşar, D.In this study, densely packed La0.75Ca0.25MnO3 (LCMO) nanowires were synthesized within a porous anodic aluminum oxide (AAO) template by means of a sol-gel method using nitrate as raw material and ethylene glycol as the chelating agent. It was observed from measurements of hysteresis curves that the magnetic behavior of the LCMO nanowire arrays was strongly dependent on the pH of the solution. As it has been reported that bulk polycrystalline La0.75Ca0.25MnO3 samples have a Curie temperature of 224 K [1], it is interesting to find that nanowires produced at pH 3 show ferromagnetic properties at room temperatureArticle Multicolor Photometric Behavior of the Young Stellar Object V1704 Cygni(Bulgarian Acad Sciences, Inst Astronomy, 2018) Ibryamov, Sunay; Semkov, Evgeni; Peneva, Stoyanka; Karadeniz, UğurResults from BV RI photometric observations of the pre-main sequence star V1704 Cyg collected during the time period from August 2010 to December 2017 are presented. The star is located in the star-forming HII region IC 5070 and it exhibits photometric variability in all optical passbands. After analyzing the obtained data, V1704 Cyg is classified as a classical T Tauri star.Article Citation - WoS: 2Citation - Scopus: 2The Synthesis of Super-Hydrophilic and Hard Mgb2 Coatings as an Alternative To Electroless Nickel Coatings(Slovenska Akademia Vied, 2018) Bülbüll, Ferhat; Güney, M.; Jafarpour, SomaiyehIn this study, we report the electroless deposition using an alternative technique for the fabrication of hard and super-hydrophilic MgB2 films. MgB2 films on AZ91 magnesium alloys were prepared using an electroless bath containing magnesium diboride nanopowders, sodium hypophosphite, sodium succinate, sodium acetate, and dimethyl sulfoxide. The electroless deposition was carried out in a bath kept at a bath temperature of 95 degrees C for 60 min. After deposition, the coated samples were annealed at 300 degrees C for 60 min to investigate crystallization, morphology, and the changes in the hardness and wettability. The phase composition, morphology, the hardness, and the contact angle of produced coatings were studied by X-ray diffractometer, scanning electron microscopy, microhardness tester, and contact angle measurement system, respectively. The coatings exhibited a dense and nodular structure with strong grain connections. As-deposited and annealed MgB2 films showed an orientation with the (101) reflection, and the highest hardness value (500 HV0.01) was obtained from the annealed coating. Both synthesized coatings had a super-hydrophilic surface.Article Citation - WoS: 18Citation - Scopus: 17Cnt Incorporated Polyacrilonitrile/Polypyrrole Nanofibers as Keratinocytes Scaffold(Trans Tech Publications, 2019) İnce Yardımcı, Atike; Aypek, Hande; Öztürk, Özgür; Yılmaz, Selahattin; Özçivici, Engin; Meşe, Gülistan; Selamet, YusufPolypyrrole (PPy) is an attractive scaffold material for tissue engineering with its non-toxic and electrically conductive properties. There has not been enough information about PPy usage in skin tissue engineering. The aim of this study is to investigate biocompatibility of polyacrilonitrile (PAN)/PPy nanofibrous scaffold for human keratinocytes. PAN/PPy bicomponent nanofibers were prepared by electrospinning, in various PPy concentrations and with carbon nanotube (CNT) incorporation. The average diameter of electrospun nanofibers decreased with increasing PPy concentration. Further, agglomerated CNTs caused beads and disordered parts on the surface of nanofibers. Biocompatibility of these PAN/PPy and PAN/PPy/CNT scaffolds were analyzed in vitro. Both scaffolds provided adhesion and proliferation of keratinocytes. Nanofiber diameter did not significantly influence the morphology of cells. However, with increasing number of cells, cells stayed among nanofibers and this affected their shape and size. In this study, we demonstrated that PAN/PPy and PAN/PPy/CNT scaffolds enabled the growth of keratinocytes, showing their biocompatibility.Article Citation - WoS: 6Citation - Scopus: 6The Growth of Silver Nanostructures on Porous Silicon for Enhanced Photoluminescence: The Role of Agno3 Concentration and Deposition Time(EDP Sciences, 2019) Çetinel, Alper; Artunç, Nurcan; Tarhan, EnverSilver nanostructures were obtained by using the electrodeposition method on n-type porous silicon (PSi) under different deposition times and concentrations of AgNO3 solutions. The analyses of the structural and photoluminescence properties of PSi/Ag were studied by SEM, XRD and photoluminescence spectroscopy. SEM analysis showed that the shape and size of Ag nanostructures significantly depend on the deposition time and concentration. It was found that spherical nanoparticles and thin Ag dendrites were obtained in short deposition times at 1 and 5 mM AgNO3 concentrations, whereas, Ag complex dendrite nanostructures formed in long deposition times. It was also found that only micro-sized Ag particles were formed at 10 mM. XRD results revealed that the degree of crystallization increases with increasing concentration. Photoluminescence analysis showed that the deposition time and concentration of AgNO3 remarkably affect the PL intensity of PSi/Ag samples. We determined a PL enhancement of similar to 2.7 for the PSi/Ag deposited at 120 s for 1 mM AgNO3. The improved PL intensity of PSi/Ag nanostructures can be explained by the combination of quantum confinement and surface states. PL analyses also indicated that with increasing deposition time and AgNO3 concentrations, the PL intensity of PSi/Ag structures significantly decreases due to the auto-extinction phenomenon.Article Citation - WoS: 2Citation - Scopus: 2Comparison of Photocatalytic Properties of Tio2 Thin Films and Fibers(EDP Sciences, 2016) Özdemir, Mehtap; Kurt, Metin; Özyüzer, Lütfi; Aygün, GülnurEfficiency of solar panels degrades as a result of organic contamination such as airborne particles, bird droppings and leaves. Any foreign object on photovoltaic panels reduces the sunlight entering the absorbing surface of the solar panels. Since this leads to a major problem decreasing in energy production, solar panels should be cleaned. The self-cleaning method can be preferred. There are some methods to clean the surface of solar panels. Among the self-cleaning materials, TiO2 is the most preferable ones because of its powerful photocatalytic properties. In this study, photocatalytic TiO2 were produced in two different nanostructures: nanofibers and thin films. TiO2 nanofibers were successfully produced by electrospinning. TiO2 thin films were fabricated by reactive magnetron sputtering technique. Both TiO2 nanofiber and thin film structures were heat-treated to form TiO2 in anatase phase at 600 °C for 2 h in air. Then, they were evaluated by SEM analyses for morphology, X-ray diffraction (XRD) analyses for phase structures, X-ray photoelectron spectroscopy (XPS) for the chemical state and atomic concentration, and UV-spectrometer for photocatalytic performance. The results indicate that photocatalytic and transmittance properties of TiO2 thin films are better than those of nanofibers. Consequently, TiO2 based thin films exhibit better performance for solar cell applications due to the surface cleanliness.Article Citation - WoS: 3Citation - Scopus: 3Mgb2 Superconducting Thin Films Grown by Magnetron Sputtering(National Institute of Optoelectronics, 2007) Ulucan, Savaş; Özyüzer, Lütfi; Okur, SalihIn this study, we report the growth and properties of MgB2 thin films on polycrystalline Al2O3 substrates. A composite MgB2 target was produced by MgB2 and Mg powder mixing, using a hot pressing technique. MgB2 thin films were grown on Al 2O3 substrates by d.c. magnetron sputtering, without heating the substrate. To enhance the superconducting properties of the as-grown films and to increase the crystal quality, an ex-situ anneal process was applied. The crystal structure of the thin films was determined by X-ray diffraction. The resistivity versus temperature of the deposited MgB2 thin films was studied to examine the transition temperatures of the films under various magnetic fields. The effects of the annealing temperature and annealing time on the electrical properties of MgB2 thin films are revealed.Conference Object Citation - WoS: 1Citation - Scopus: 1Minority Carrier Properties of Microcrystalline Silicon Thin Films Grown by Hw-Cvd and Vhf-Pecvd Techniques(National Institute of Optoelectronics, 2005) Okur, Salih; Göktaş, Oktay; Güneş, Mehmet; Finger, Friedhelm; Carius, ReinhardOpto-electronic properties of μc-Si:H films prepared by hot-wire/catalytic chemical vapor deposition (HWCVD) and very high frequency plasma enhanced chemical vapor deposition (VHF-PECVD) techniques with various silane concentrations (SC) have been investigated using Raman spectroscopy, the steady-state photocarrier grating technique (SSPG), and the steady-state photoconductivity (SSPC). A correlation between the minority carrier transport properties and the microstructure has been found, using the dependence of the diffusion length (Ld) on the SC and Raman intensity ratio (I c RS) representing crystalline volume fractions. I C RS changes from 0.22 to 0.77. Ld increases with increasing Ic RS. It peaks around 0.5 with a maximum value of 270 nm, then decreases. Similar dependences of Ld on I C RS were obtained for films prepared by both HWCVD and VHF-PECVD. However, the grating quality factor measured on highly crystalline HWCVD films is substantially smaller than that found for VHF-PECVD films, indicating a relatively higher surface roughness present in the highly crystalline HWCVD films.Conference Object Citation - WoS: 16Citation - Scopus: 17Instability Phenomena in Microcrystalline Silicon Films(National Institute of Optoelectronics, 2005) Finger, Friedhelm; Carius, Reinhard; Dylla, Thorsten; Klein, Stefan; Okur, Salih; Güneş, MehmetMicrocrystalline silicon (μc-Si:H) for solar cell applications is investigated with respect to the material stability upon treatment of the material in various environments, followed by annealing. The material can be separated into two groups: (i) material with high crystalline volume fractions and pronounced porosity which is susceptible to in-diffusion of atmospheric gases, which, through adsorption or oxidation affect the electronic properties and (ii) compact material with high or low crystalline volume fractions which show considerably less or no influence of treatment in atmospheric gases. We report the investigation of such effects on the stability of μc-Si:H films prepared by plasma enhanced chemical vapour deposition and hot wire chemical vapour deposition.