Physics / Fizik
Permanent URI for this collectionhttps://hdl.handle.net/11147/6
Browse
6 results
Search Results
Article Citation - WoS: 4Citation - Scopus: 4Photonic Crystal Textiles for Heat Insulation(American Institute of Physics, 2023) Çetin, Zebih; Tunçtürk, Yiğit; Sözüer, Hüseyin SamiIn this work, we have studied transmission properties of a photonic crystal-like structure that can be woven into fabrics. An interesting possibility emerges when considering the potential energy savings through suppression of radiation. It is a well-established fact that every object at a finite temperature inherently emits electromagnetic waves. Within the specific context of the human body, radiation takes on a crucial role as a fundamental mechanism governing heat dissipation. Thus, exploring ways to manage or mitigate this radiation could offer innovative approaches to optimize energy consumption and enhance heat regulation. It is well known that a photonic crystal can block electromagnetic energy with a specific frequency that is falling into a photonic bandgap. By using the numerical method called a finite-difference time domain, we have shown that this property of a periodic structure can be used to make textiles to save energy that is used to heat a human body environment. Numerical calculations have shown that by using the proposed photonic crystal structure, 53 % of electromagnetic energy is reflected. Although we mainly focused on textiles, it is worth highlighting that the same fundamental principle can be extended to diverse fields; for example, this structure can be integrated with construction materials and effectively function as a radiation heat insulator. © 2023 Author(s).Conference Object Citation - WoS: 36Citation - Scopus: 40Thermal Management in Large Bi2212 Mesas Used for Terahertz Sources(Institute of Electrical and Electronics Engineers Inc., 2009) Kurter, Cihan; Gray, Kenneth E.; Zasadzinski, John F.; Özyüzer, Lütfi; Koshelev, A. E.; Li, Q.; Yamamoto, T.; Kadowaki, K.; Kwok, W. K.; Tachiki, M.; Welp, U.We present a thermal analysis of a patterned mesa on a Bi 2Sr2CaCu2O8 (Bi2212) single crystal that is based on tunneling characteristics of the c-axis stack of ∼800 intrinsic Josephson junctions in the mesa. Despite the large mesa volume (e.g., 40 × 300 × 1.2 μm3) and power dissipation that result in self-heating and backbending of the current-voltage curve (I-V), there are accessible bias conditions for which significant polarized THz-wave emission can be observed. We estimate the mesa temperature by equating the quasiparticle resistance, Rqp(T), to the ratio V/I over the entire I-V including the backbending region. These temperatures are used to predict the unpolarized black-body radiation reaching our bolometer and there is substantial agreement over the entire I-V. As such, backbending results from the particular R qp (T) for Bi2212, as first discussed by Fenton, rather than a significant suppression of the energy gap. This model also correctly predicts the observed disappearance of backbending above ∼60 K.Article Citation - WoS: 25Citation - Scopus: 26Structural and Optical Characteristics of Tantalum Oxide Grown by Pulsed Nd:yag Laser Oxidation(AVS Science and Technology Society, 2006) Atanassova, Elenada A.; Aygün, Gülnur; Turan, Raşit; Babeva, T.Tantalum pentoxide (Ta2 O5) thin films (20-50 nm) have been grown by 1064 nm Nd:YAG laser oxidation of Ta film deposited on Si. The chemical bonding, structure, and optical properties of the films have been studied by Fourier transform infrared spectroscopy, x-ray diffraction, and reflectance measurements at normal light incidence in the spectral range of 350-800 nm. The effect of the substrate temperature (250-400 °C) during oxidation and its optimization with respect to the used laser beam energy density (3.2-3.4 J cm2 per pulse) is discussed. It is established that the substrate temperature is a critical factor for the effectiveness of the oxidation process and can be used to control the composition and amorphous status of the films. The film density explored by refractive index is improved with increasing film thickness. The refractive index of the layers grown under the higher laser beam energy density and at substrate temperature of 350-400 °C was found to be close to the value of bulk Ta2 O5. The films are amorphous at substrate temperature below 350 °C and possessed an orthorhombic (Β- Ta2 O5) crystal structure at higher temperatures. The thinner layers crystallize at a little higher temperature.Article Citation - WoS: 2Citation - Scopus: 2Origin of a Localized Vibrational Mode in a Gasb Substrate With a Mbe-Grown Znte Epilayer(IOP Publishing Ltd., 2006) Kim, Hyunjung; Tarhan, Enver; Chen, G.; Ramdas, A. K.; Sciacca, M. D.; Gunshor, R. L.A localized vibrational mode (LVM) with a remarkable fine structure is observed in the infrared transmission spectrum of a ZnTe epilayer grown with molecular beam epitaxy (MBE) on a GaSb substrate. On the basis of the Zn and Te deposited on the GaSb substrate during the MBE growth of ZnTe, and assuming diffusion of Zn and Te into GaSb, the LVM is attributed to Zn, substitutionally replacing either the cation, Ga (ZnGa), or the anion, Sb (Zn Sb). The frequency of the LVM and its fine structure can then be interpreted in terms of the infrared active modes of 64Zn substituting for Sb as an anti-site impurity and treating the centre as an XY4 quasimolecule. With X≡64Zn and Y≡ 69Ga and 71Ga, occupying the nearest-neighbour sites reflecting all the possible combinations and permutations as well as the natural isotopic abundance of Ga, the fine structure of the LVM can be accounted for quantitatively.Conference Object Citation - WoS: 3Citation - Scopus: 3Low-Field Behavior of Ti-Added Mgb2/Cu Superconducting Wires(Institute of Electrical and Electronics Engineers Inc., 2005) Gençer, Ali; Kılıç, Ahmet; Okur, Salih; Güçlü, Nusret; Özyüzer, Lütfi; Belenli, İbrahimWe report on low-field magnetic properties of Ti-added (0-20 wt.% of Ti) Cu-clad MgB2 superconducting wires. Wires were produced by mixing appropriate amount of Ti and reacted MgB2 powder which was then placed inside Cu tubes with a diameter of 6 mm. The tubes were then cold worked by rolling or drawing to smaller diameters and then annealed at various temperatures to enhance the grain connectivity. XRD studies show that Ti addition results in new but minor phases. We have then measured ac susceptibilities in the temperature range between 20 K and 40 K in ac fields of 20-1600 A/m. The data show that an additional loss mechanism is established with Ti-addition. The calculated ac losses are increasing with increasing Ti-content in the main superconducting matrix.Article Citation - WoS: 49Citation - Scopus: 51Voc Sensors Based on a Metal Oxide Nanofibrous Membrane/Qcm System Prepared by Electrospinning(Royal Society of Chemistry, 2014) Horzum Polat, Nesrin; Taşçıoğlu, Didem; Özbek, Cebrail; Okur, Salih; Demir, Mustafa MuammerWe report a simple synthetic route to fabricate crystalline ZnO and CeO2/ZnO nanofibrous mats and their sensing characteristics against volatile organic compounds (VOCs) such as benzene, propanol, ethanol, and dichloromethane. Precursor fibers were fabricated by electrospinning of poly(vinyl alcohol) and metal salt(s) at 2.5 kV cm-1 in aqueous solution. The fibers were directly deposited on the crystal surface of a quartz crystal microbalance (QCM). The crystal, which was coated by nanostructured PVA/metal precursor(s) fibers, was subjected to calcination in air at 500 °C for 5 h. The formation of an oxide based nanofiber mat was revealed by scanning electron microscopy and X-ray diffraction. Upon exposure of the nanofiber mats to the VOCs, the compounds adsorbed onto the surface of oxidic fibers. The physisorption of the compounds was confirmed by FTIR and QCM. Both systems showed sensitivity to the VOCs and they hold a broad promise particularly for sensing applications of volatile alcoholic compounds. The introduction of CeO2 into the ZnO structure reduced the sensitivity of ZnO most probably due to the decrement of oxygen vacancies.