Physics / Fizik
Permanent URI for this collectionhttps://hdl.handle.net/11147/6
Browse
4 results
Search Results
Article Citation - WoS: 4Citation - Scopus: 5Enhanced Optoelectronic Properties of Magnetron Sputtered Ito/Ag Multilayers by Electro-Annealing(AVS, 2022) Uyanık, Zemzem; Türkoğlu, Fulya; Köseoğlu, Hasan; Ekmekçioğlu, Merve; Ata, Bengü; Demirhan, Yasemin; Özdemir, Mehtap; Aygün, Gülnur; Özyüzer, LütfiIndium tin oxide/silver/indium tin oxide (ITO/Ag/ITO) multilayers have attracted much attention to fulfill the growing need for high-performance transparent conducting oxide electrodes. To make these transparent multilayers work better, electro-annealing, which is a method of self-heating by electric current, can be effective. Moreover, the effect of current on ITO/Ag/ITO multilayers should be investigated to make sure that electronic devices will be reliable over their lifetime. In this study, ITO/Ag/ITO multilayer electrodes with varying Ag thicknesses were grown by DC magnetron sputtering at room temperature. Structural, optical, and electrical properties of these multilayers were investigated before and after electro-annealing. Measurement results revealed that improved optical transmittance and sheet resistance can be obtained by the optimization of Ag thickness for the as-grown ITO/Ag/ITO layers. The highest figure of merit (FoM) value of 17.37 × 10−3 Ω−1 with optical transmittance of 85.15% in the visible region and sheet resistance of 11.54 Ω/□ was obtained for the Ag thickness of 16.5 nm for as-grown samples. The electro-annealing of as-grown ITO/Ag/ITO multilayers led to improved optical behavior of the multilayer structure over a wide spectral range, especially in the near-infrared range. Electro-annealing also provided an improvement in the crystallinity and sheet resistance of the electrodes. The improvement of the electrical and optical properties of the structure enabled a FoM of 23.07 × 10−3 Ω−1 with the optical transmittance of 86.80% in the visible region and sheet resistance of 10.52 Ω/□. The findings of this work provide proper knowledge of the properties of ITO/Ag/ITO multilayers under electrical current and suggest that the overall performance of the multilayers can be improved by the electro-annealing process.Article Citation - WoS: 20Citation - Scopus: 23Surface Free Energy and Wettability Properties of Transparent Conducting Oxide-Based Films With Ag Interlayer(Elsevier, 2021) Özbay, Salih; Erdoğan, Nursev; Erden, Fuat; Ekmekçioğlu, Merve; Rakop, Büşra; Özdemir, Mehtap; Aygün, Gülnur; Özyüzer, LütfiITO, ZTO, AZO and Ag are commonly used in transparent conducting oxide (TCO)/metal/TCO electrodes to form multilayered thin films on a suitable substrate. A detailed surface free energy (SFE) knowledge of these films is critical to design desirable TCO-based sandwich structures. In this study, TCO/Ag/TCO multilayer thin films were coated onto glass substrates using ITO, ZTO, AZO and Ag targets by magnetron sputtering. The wettability properties of TCO, Ag interlayer and TCO/Ag/TCO were evaluated by contact angle measurements of seven different liquids having various surface tension values. The dispersive and polar components of SFE were calculated using geometric and harmonic mean approaches. The acidic and basic components of SFE were calculated using van Oss-Chaudhury-Good method. Following this, the work of adhesion values between TCO films and Ag interlayer were estimated using SFE values of the films. The results show that the SFE components of the surfaces differ depending on the TCO type, the total SFE values of TCO/Ag/TCO films were lower than that of TCO films, and AZO/Ag adhesion is stronger than the other TCO/Ag structures. The reasons behind these differences were discussed by evaluating the SFE, XRD, AFM and SEM analysis simultaneously.Article Citation - WoS: 39Citation - Scopus: 46Surface Free Energy Analysis of Ito/Au Multilayer Thin Films on Polycarbonate Substrate by Apparent Contact Angle Measurements(Elsevier, 2020) Özbay, Salih; Erdoğan, Nursev; Erden, Fuat; Ekmekçioğlu, Merve; Özdemir, Mehtap; Aygün, Gülnur; Özyüzer, LütfiA detailed surface free energy (SFE) knowledge of transparent conducing oxide (TCO)/metal/TCO electrodes is necessary for their applications related to surface wettability. However, SFE analysis of these surfaces has not been performed systematically previously. In this study, ITO and ITO/Au/ITO multilayer thin films were coated onto O-2 plasma treated polycarbonate (PC) substrates by magnetron sputtering. The wettability characteristics of untreated PC, O-2 plasma treated PC, ITO, Au interlayer, and ITO/Au/ITO multilayer thin films were evaluated by apparent contact angle measurements of nine different test liquids having various surface tensions. Following this, Lifshitz-van der Waals, acidic, basic, dispersive, and polar components of SFE were calculated using acidbase, geometric and harmonic mean approaches. In the present study, in which the significance of calculation methods and selected liquid pairs on SFE parameters were investigated, the effect of Au interlayer presence on SFE parameters were also evaluated simultaneously. The results showed that the total SFE values of ITO/Au/ITO multilayer thin films were found to be higher than that of ITO surface. The reasons behind this difference were discussed in terms of SFE components obtained using various liquid pairs by different methods. The results were also supported with XRD, XPS, AFM, and TEM analysis.Article Citation - WoS: 7Citation - Scopus: 7An Indium Tin Oxide Metasurface Filter for Terahertz Applications: Design, Fabrication, and Characterization(World Scientific Publishing Co. Pte Ltd, 2017) Nebioğlu, Mehmet Ali; Takan, Taylan; Altan, Hakan; Demirhan, Yasemin; Alaboz, Hakan; Özyüzer, Lütfi; Sabah, CumaliIn this paper, using a cross-shaped complementary Indium Tin Oxide (ITO)-based metasurface design, the transmission of THz radiation is shown to be filtered within the 3 dB level from maximum in the frequency range of interest (333 GHz). Various metasurface structures primarily composed of cross-shaped openings with a 400 micron unit cell size are patterned on top of 1750 micron thick fused silica substrates. They are patterned using UV lithography methods after the films were grown using DC sputtering. The fabricated structures were characterized using Terahertz Time Domain Spectroscopy (THz-TDS) measurement technique. The measured transmission agrees well with the simulation of the structure for four different samples with different geometries. These results suggest that metasurface and/or metamaterial patterns based on ITO in visibly transparent media can be utilized for filtering of frequencies in the long wavelength spectrum. These types of filters can be very useful in the near future for THz communication and security applications. ©