Physics / Fizik
Permanent URI for this collectionhttps://hdl.handle.net/11147/6
Browse
3 results
Search Results
Other Erratum To: Mbe-Grown Cdte Layers on Gaas With In-Assisted Thermal Deoxidation(Springer Verlag, 2016) Arı, Ozan; Bilgilisoy, Elif; Özçeri, Elif; Selamet, YusufArticle Citation - WoS: 6Citation - Scopus: 5Mbe-Grown Cdte Layers on Gaas With In-Assisted Thermal Deoxidation(Springer Verlag, 2016) Arı, Ozan; Bilgilisoy, Elif; Özçeri, Elif; Selamet, YusufMolecular beam epitaxy (MBE) growth of thin (∼2 μm) CdTe layers characterized by high crystal quality and low defect density on lattice mismatched substrates, such as GaAs and Si, has thus far been difficult to achieve. In this work, we report the effects of in situ thermal deoxidation under In and As4 overpressure prior to the CdTe growth on epiready GaAs(211)B wafers, aiming to enhance CdTe crystal quality. Thermally deoxidized GaAs samples were analyzed using in situ reflection high energy electron diffraction, along with ex situ x-ray photo-electron spectroscopy (XPS) and atomic force microscopy. MBE-grown CdTe layers were characterized using x-ray diffraction (XRD) and Everson-type wet chemical defect decoration etching. We found that In-assisted desorption allowed for easier surface preparation and resulted in a smoother surface compared to As-assisted surface preparation. By applying In-assisted thermal deoxidation to GaAs substrates prior to the CdTe growth, we have obtained single crystal CdTe films with a CdTe(422) XRD rocking curve with a full-width half-maximum value of 130.8 arc-s and etch pit density of 4 × 106 cm−2 for 2.54 μm thickness. We confirmed, by XPS analysis, no In contamination on the thermally deoxidized surface.Article Citation - WoS: 19Citation - Scopus: 19Biofilm Formation by Staphylococcus Epidermidis on Nitrogen Ion Implanted Cocrmo Alloy Material(John Wiley and Sons Inc., 2007) Öztürk, Orhan; Sudağıdan, Mert; Türkan, UğurStaphylococcus epidermidis is the primary cause of medical device-related infections due to its adhesion and biofilm forming abilities on biomaterial surfaces. For this reason development of new materials and surfaces to prevent bacterial adhesion is inevitable. In this study, the adhesion of biofilm forming S. epidermidis strain YT-169a on nitrogen (N) ion implanted as well as on as-polished CoCrMo alloy materials were investigated. A medical grade CoCrMo alloy was ion implanted with 60 keV N ions to a high dose of 1.9 × 10 18 ions/cm2 at substrate temperatures of 200 and 400°C. The near-surface implanted layer crystal structures, implanted layer thicknesses, and roughnesses were characterized by XRD, SEM and AFM. The number of adherent bacteria on the surfaces of N implanted specimens was found to be 191 × 106 CFU/cm2 for the 200°C and 70 × 106 CFU/cm2 for the 400°C specimens compared to the as-polished specimen (3 × 106 CFU/cm2). The adhesion test results showed that S. epidermidis strain YT-169a adhere much more efficiently to the N implanted surfaces than to the as-polished CoCrMo alloy surface. This was attributed mainly to the rougher surfaces associated with the N implanted specimens in comparison with the relatively smooth surface of the as-polished specimen.