Environmental Engineering / Çevre Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4321
Browse
2 results
Search Results
Article Citation - WoS: 31Citation - Scopus: 35Electrochemical Degradation of Methylene Blue by a Flexible Graphite Electrode: Techno-Economic Evaluation(American Chemical Society, 2022) Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Edebali, Özge; Şahin, Çağrı; Genişoğlu, Mesut; Ökten, Hatice EserIn this study, electrochemical removal of methylene blue (MB) from water using commercially available and low-cost flexible graphite was investigated. The operating conditions such as initial dye concentration, initial solution pH, electrolyte dose, electrical potential, and operating time were investigated. The Box-Behnken experimental design (BBD) was used to optimize the system's performance with the minimum number of tests possible, as well as to examine the independent variables' impact on the removal efficiency, energy consumption, operating cost, and effluent MB concentration. The electrical potential and electrolyte dosage both improved the MB removal efficiency, since increased electrical potential facilitated production of oxidizing agents and increase in electrolyte dosage translated into an increase in electrical current transfer. As expected, MB removal efficiency increased with longer operational periods. The combined effects of operating time-electrical potential and electrical potential-electrolyte concentration improved the MB removal efficiency. The maximum removal efficiency (99.9%) and lowest operating cost (0.012 $/m3) were obtained for initial pH 4, initial MB concentration 26.5 mg/L, electrolyte concentration 0.6 g/L, electrical potential 3 V, and operating time 30 min. The reaction kinetics was maximum for pH 5, and as the pH increased the reaction rates decreased. Consequent techno-economic assessment showed that electrochemical removal of MB using low-cost and versatile flexible graphite had a competitive advantage.Article Methylene Blue Removal of Fixed-Bed Column Reactor With Pumice and Nzvi-Pumice: Experimental and Modeling Study(Süleyman Demirel Üniversitesi, 2019) Genişoğlu, Mesut; Gören, Ayşegül Yağmur; Balcı, Esin; Recepoğlu, Yaşar Kemal; Ökten, Hatice EserNano zero-valent iron (nZVI) emerges as a low cost and eco-friendly adsorbent to treat textile wastewater, which is rich in dye content. However nZVI particles can easily agglomerate in aqueous environment due to electrostatic interaction, decreasing their treatment efficiency. Therefore pumice, a low-cost and naturally found porous material with lower specific surface area (2m2/gr), can be used as support material to reduce agglomeration of nZVI. Treatment efficiencies of pumice/nZVI packing (10:0 and 9:1 (w/w)) in column reactor for specified initial methylene blue concentrations (25, 50, 75 and 100 mg/L) were investigated in this study. Adsorption capacities of the adsorbents were calculated as 2.8 and 4.2 mg/g-adsorbent, respectively at 100 mg/L initial methylene blue concentration. Mixed bed column performed significantly better than its pumice-only counterpart for low initial concentrations. Thomas adsorption model was applied to experimental results with a moderate to high predictive power.