Environmental Engineering / Çevre Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4321
Browse
4 results
Search Results
Article Citation - WoS: 10Citation - Scopus: 12Novel Hybrid Adsorption-Electrodialysis (aded) System for Removal of Boron From Geothermal Brine(American Chemical Society, 2022) Altınbaş, Bekir Fırat; Orak, Ceren; Ökten, Hatice Eser; Yüksel, AslıA novel hybrid adsorption-electrodialysis (AdED) system to remove environmentally harmful boron from geothermal brine was designed and effective operating parameters such as pH, voltage, and flow rate were studied. A cellulose-based adsorbent was synthesized from glycidyl methacrylate (GMA) grafted cellulose and modified with a boron selective n-methyl-d-glucamine (NMDG) group and characterized with SEM-EDX, FT-IR, and TGA analyses. Batch adsorption studies revealed that cellulose-based adsorbent showed a remarkable boron removal capacity (19.29 mg/g), a wide stable operating pH range (2-10), and an adsorption process that followed the Freundlich isotherm (R2= 0.95) and pseudo-second-order kinetics (R2= 0.99). In the hybrid AdED system, the optimum operating parameters for boron removal were found to be a pH of 10, a voltage of 10 V, a flow rate of 100 mL/min, and an adsorbent dosage of 4 g/L. The presence of the adsorbent in the hybrid system increased boron removal from real geothermal brine (containing 199 ppm boron) from 7.2% to 73.3%. The results indicate that the designed AdED system performs better than bare electrodialysis for boron removal from ion-rich real geothermal brine while utilizing environmentally friendly cellulose-based adsorbent.Article Citation - WoS: 42Citation - Scopus: 44Boron Carbon Nitride Nanosheets in Water and Wastewater Treatment: a Critical Review(Elsevier, 2022) Recepoğlu, Yaşar Kemal; Gören, Ayşegül Yağmur; Vatanpour, Vahid; Yoon, Yeojoon; Khataee, AlirezaThe availability and accessibility of clean and secure water supplies are pressing technological and scientific issues worldwide. As a result of global water constraints, wastewater treatment and reuse are being evaluated as feasible alternatives to fresh water for agricultural irrigation and domestic and industrial purposes. Boron carbon nitride (BCN) nanosheets have been studied intensively in the last decade in batteries, biosensors, and capacitors, and for use as catalysts, and they have recently been used in wastewater treatment. BCN materials, along with their synthesis processes, characteristics, and application areas in water and wastewater treatment, are discussed thoroughly in this paper. Additionally, synthesis processes for ternary BCN compounds, including chemical vapor deposition, ion beam-aided deposition, magnetron sputtering, and pulsed laser deposition, are described. BCN materials have also been explored because of their flexible electrical features, excellent mechanical strength, outstanding unreactivity, and significant stability, which make them appropriate for a range of severe environment applications. Thus, the use of BCN materials as photocatalysts and adsorbents and in electrochemical reduction and capacitive deionization are also discussed thoroughly. The highest ammonia production of 172,226.5 μg/h.mg.cat and faradic efficiency of 95.3% have been obtained using the BCN@Cu/CNT catalyst, whereas the ammonia production and FE values for metal-free BCN are 7.75 μg/h.mg.cat and 13.8%. Moreover, the maximum attained adsorption capacities of BCN nanosheets for Pb2+ and Hg2+ are 210 and 625 mg/g, respectively. Overall, this review indicates that essential work on BCN nanosheets is still needed. Future research should focus on the development of BCN nanostructures to encourage multidisciplinary research.Article Citation - WoS: 47Mitigation of Organophosphate Pesticide Pollution in Agricultural Watersheds(Elsevier, 2020) Şahin, Çağrı; Karpuzcu, M. EkremAdsorption and biodegradation processes for four organophosphate pesticides (chiorpyrifos, diazinon, fenthion, dichlorvos) in wetlands and agricultural drains in Meric-Ergene Basin, Turkey have been investigated. K-oc (organic carbon normalized partition coefficient) values for all pesticides except diazinon were higher in more aromatic Pamuklu Drain sediments, indicating the possible influence of aromaticity on the extent of adsorption. The average half-lives of pesticides in Gala Lake sediments and Pamuklu agricultural drain sediments ranged from 2.25 to 69.31 days with chlorpyrifos exhibiting the slowest biotransformation rate and dichlorvos having the fastest biotransforrnation rate. The presence of humic substances and hydroperiod of wetlands have been identified as possible factors that affected the behavior of organophosphate pesticides in this study. The results from this study provide insight into the constructed wetland design offered for the mitigation of organophosphate pesticides in the basin. (C) 2019 Elsevier B.V. All rights reserved.Article Citation - WoS: 3Citation - Scopus: 4Use of Nano Zero-Valent Iron Coated Coffee Grounds for Removal of Zn(ii) and Ni(ii) From Aqueous Solutions(Desalination Publications, 2019) Gören, Ayşegül Yağmur; Genişoğlu, Mesut; Ökten, Hatice EserThis research investigates the adsorption capacity of a novel composite material, namely nano zero-valent iron coated coffee grounds (nZVI-CG), for removal of zinc (Zn) and nickel (Ni). nZVI particles were synthesized and immobilized to the surface of waste coffee grounds (CG) using the ultrasonic-assisted liquid phase method. Characterization of synthesized nZVI-CG composite and bare CG showed that nZVI coating has increased the surface area significantly. Batch tests were conducted to examine the effects of pH, reaction time and initial metal concentrations on Zn2+ and Ni2+ removal. At an initial metal concentration of 10 mg-Ni/L and 10 mg-Zn/L, nZVI-CG removal rates for Zn2+ and Ni2+ were observed as 98.89% and 97.29%, respectively; while removal rates of bare CG have remained at 51% (Zn2+) and 48.1% (Ni2+). Moreover, acidic conditions were observed to deteriorate Ni2+ and Zn2+ adsorption since most functional groups of the metals were protonated. Increasing initial nickel and zinc concentrations decreased removal rates. While the model fittings improved with increasing pH, in the case of nZVI-CG, Langmuir isotherm gave the best fits for Ni2+ and Zn2+ at pH 5 and 7. Also, our experimental results followed the pseudo-second-order kinetic model, regardless of the used adsorbent. Consequently, our results showed that nZVI-CG composite material is a promising alternative adsorbent for pilot scale metal removal/recovery applications.