Environmental Engineering / Çevre Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4321
Browse
5 results
Search Results
Conference Object 3d Modeling of a Historical Mine Waste Site Using Uav Images: Estimation of Stockpile Volumes(Springer, 2023) Önal, Okan; Gündüz, OrhanIn recent decades, the use of Unmanned Aerial Vehicles (UAV) for land surveying became very popular because of their simplicity and low cost. Aerial images of the site can be used for the reconstruction of the site’s 3D digital model. Once proper calibrations are made, these digital models can be used for several purposes including stockpile volume estimation, stability analyses, forensic engineering and archiving, etc. In this study, the 3D model of an abandoned historical mine waste disposal site located in Balıkesir-Turkey was reconstructed for the estimation of the waste stockpile volumes. The historical mine site is a facility that was abandoned more than 80 years ago. Mine wastes of different quality were disposed of in and around the site along the hydrologically intermittent creek that passes through the site. No engineered precautions were taken at the site to reduce the environmental impacts and all waste piles were exposed to the natural eroding effect of precipitation and wind. The total amount of the waste volume is not known accurately, which prevents researchers to quantify the potential impacts associated with different waste stockpiles. Thus, a 3D digital model of the site was created by using UAV data obtained from a quadcopter and later processed to obtain a digital topography of the site with an improved accuracy value of ± 2 cm. The stockpiles were later analyzed with geographic information systems to characterize the magnitude of mine wastes and to propose alternative engineering solutions for environmental mitigation. © The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd 2023.Article Fabrication of Superhydrophilic Teos-Lactic Acid Composite Films and Investigation of Biofouling Behaviour(Yıldız Teknik Üniversitesi, 2022) Ervan, Tuğçe; Küçüker, Mehmet Ali; Cengiz, UğurPhytoplankton and diatom microalgae species cause biofouling by adhering to the surfaces, especially in closed cultivation systems such as tubular photobioreactors. This biofilm formation blocks the sunlight; after harvesting, it is necessary to clean the reactor. This cleaning process causes loss not only for time and finance but also in terms of environmental pollution due to using toxic chemicals and excess water usage. This study aimed to investigate the reduction of the microorganism cell adhesion on the hybrid surface. To succeed in this, the composite surface of tetraethoxysilane (TEOS) and lactic acid (LA) was prepared by the sol-gel process. Then the hybrid surfaces were coated on glass slides by the dip coating method. The wettability performance of the TEOS-LA hybrid surface was investigated using contact angle measurement and light transmittance. The wettability result showed that the superhydrophilic surface having 54 mJ/m2 of surface free energy values was obtained. An increase in the lactic acid content of the composite films increased the surface free energy (SFE) values decreasing the water contact angle. A pencil hardness test characterized the mechanical strength of the surfaces, and it was determined that the hardness of the composite films was decreased by increasing the LA content of the composite films. Resultantly, it is found that the TEOS-LA superhydrophilic composite film reduces the adhesion of microalgae.Article Citation - Scopus: 2Indoor Air Co2 Concentrations and Ventilation Rates in Two Residences in İzmir, Turkey(Yıldız Teknik Üniversitesi, 2022) Taşer, Aybüke; Uçaryılmaz, Sedef; Çataroğlu, Ilgın; Sofuoğlu, Sait CemilHouses are the places where people spend most of their time. That is why indoor air quality at home is essential for public health. Sufficient ventilation is the factor to avoid accumulation of pollutants in indoor air, which include microorganisms, such as SARS-CoV-2. Therefore, adequate ventilation is needed to provide good indoor air quality for human health and reduce infection risk at home. There are no reports of residential ventilation rates in Turkey. In this study, CO2 concentrations were measured in two residences in Izmir, Turkey. Three experiments were conducted to determine background concentrations and the rate of natural ventilation with infiltration and opening windows. Results show that air exchange provided by infiltration is low for both case rooms, while adequate ventilation could be achieved with natural ventilation under the studied conditions. Infiltration provided air exchange and ventilation rates of 0.18 h-1 and 5.9 m3/h for Case 1 and 0.29 h-1 and 8.23 m3/h for Case 2, respectively. Air exchange and ventilation rates were increased to 2.36 h-1 and 76.9 m3/h for Case 1 and 1.2 h-1 and 34 m3/h for Case 2, respectively, by opening the windows. Although ventilation can be provided by opening the windows, the other factors that determine its rate, e.g., meteorological variables, cannot be controlled by the occupants. Consequently, people cannot ensure the good indoor air quality in bedrooms and sufficient reduction in transmission of pathogenic microorganisms; therefore, risk of spreading diseases such as COVID-19 at home.Article An Experimental Study on Release Mechanism of Iron and Manganese From Sediments To the Water Column in Reservoirs(2021) Vural, Buse; Elçi, Şebnem; Ökten, Hatice EserIron and manganese accumulation in drinking water reservoirs is a challenging issue and should be controlled to prevent their adverse effects on human health. Accumulation of these elements not only clogs pipeline systems but also causes stains on fixtures and laundry. Also, high concentrations of iron and manganese may lead to various health problems when ingested. This study focuses on the release mechanism of iron and manganese from sediments to the water column in reservoirs and investigates methods to prevent this release. Effects of hypoxia, hypolimnetic aeration, alkalinity of water, and thermal stratification on iron and manganese concentrations were investigated through laboratory experiments. Experiments done simulating the water column showed that hypoxia caused more dissolution of ferrous iron when compared with that of manganese. Accordingly, aeration of the water column in hypoxic conditions lead to a significant decrease in ferrous iron concentrations (in our case reaching zero). However, manganese and total iron levels were not affected by the aeration of the water column. Alkalinity level of the water column was observed to have a great effect on the solubility of iron and manganese. Concentrations of total Fe and total Mn measured for acidic (pH = 5) conditions were considerably greater than concentrations measured at neutral conditions. As for alkaline (pH = 11) conditions, the opposite was observed with measured concentrations of total Fe and total Mn being lower than the ones measured for neutral conditions. Thermal stratification had an enhancing effect on the solubility of both iron and manganese ions. While aeration of the stratified water column slightly decreased the concentrations of Total Fe and Mn, it had a greater impact on decreasing $Fe^{2+}$ concentrations.Article Citation - WoS: 4Citation - Scopus: 4Selection of Alternative Landfill Location by Using a Geographical Information System. European Side of Istanbul. Case Study(Technical University of Wroclaw, 2016) Demir, Göksel; Kolay, Umut E.; Ökten, Hatice Eser; Alyüz, Ümmügülsüm; Bayat, CumaOne of the most difficult tasks encountered when implementing waste management practices in Turkey involves the selection of the most suitable area for a landfill. The Geographic Information System (GIS) which possesses the ability to imitate and process economic and environmental constraints, presents itself as a useful and effective decision support tool. This study will utilize the GIS to determine feasible alternative landfill areas on the European side of Istanbul, which has a high density population, showing that accurate selection results can be achieved at lower cost.