Environmental Engineering / Çevre Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4321
Browse
34 results
Search Results
Article Pomza ve Nsdd-pomza ile Sabit Yataklı Kolon Reaktörde Metilen Mavisi Giderimi: Deneysel ve Modelleme Çalışması(2019) Balcı, Esin; Ökten, Hatice Eser; Genişoğlu, Mesut; Recepoğlu, Yaşar Kemal; Gören, Ayşegül YağmurNano sıfır değerlikli demir (nSDD) yüksek renk konsantrasyonlarına sahip tekstil atıksularının arıtımında ekonomik ve çevre dostu bir adsorban olarak ortaya çıkmaktadır. Ancak nSDD partikülleri sulu çözeltilerde elektrostatik etkileşimler sebebiyle kolayca topaklaşmakta ve bu da arıtma veriminin düşmesine neden olmaktadır. Dolayısıyla düşük maliyetli, doğal poröz yapıda ve ortalama 2m2/gr spesifik yüzey alanına sahip pomza, nSDD topaklaşmasını önleyici bir malzeme olarak kullanılabilir. Bu çalışmada sadece pomza ve pomzanSDD (ağırlıkça 9:1) karışımının kullanıldığı kolon reaktörde 25, 50, 75 ve 100 mg/L metilen mavisi konsantrasyonları için arıtma verimleri incelenmiştir. Pomzanın ve pomza-nSDD karışımının 100 mg/L metilen mavisi deneyindeki toplam kapasiteleri sırasıyla 2,8 ve 4,2 mg/g-adsorban olarak bulunmuştur. Özellikle düşük konsantrasyonlarda, pomza-nSDD karışımının arıtma performansını önemli ölçüde arttırdığı görülmüştür. Thomas modeli deneysel verilere uygulanmış ve modelin öngörü gücünün düşük konsantrasyonda yüksekken, yüksek konsantrasyonlarda ortalama olduğu kanısına varılmıştır.Article Citation - WoS: 6Citation - Scopus: 9The Effect of Military Conflict Zone in the Middle East on Atmospheric Persistent Organic Pollutant Contamination in Its North(Elsevier, 2023) Ayrı, İlknur; Genişoğlu, Mesut; Sofuoğlu, Aysun; Kurt Karakuş, Perihan B.; Birgül, Askın; Sofuoğlu, Sait CemilThis study aimed to investigate long-range atmospheric transport of selected POPs released due to the effects of mili-tary conflicts in regions to the south of Turkey's borders. Ten locations were selected to deploy passive air samplers at varying distances to the border on a southeast-west transect of the country, proximity-grouped as close, middle, and far. Sampling campaign included winter and transition months when desert dust transport events occur. Hypothesis of the study was that a decreasing trend would be observed with increasing distance to the border. Group comparisons based on statistical testing showed that PBDE-183, E45PCB, and dieldrin in winter; PBDE-28, PBDE-99, PBDE-154, p,p '-DDE, E14PBDE, and E25OCP in the transition period; and PBDE-28, PBDE-85, PBDE-99, PBDE-154, PBDE-190, PCB-52, E45PCB, p,p '-DDE, and E25OCP over the whole campaign had a decreasing trend on the transect. An analysis of concen-tration ratio to the background showed that long-range atmospheric transport impacted the study sites, especially those of close group in comparison to the local sources. Back-trajectory analyses indicated that there was transport from the conflict areas to sites in the close-proximity group, while farther sampling locations mostly received air masses from Europe, Russia, and former Soviet Union countries, followed by North Africa, rather than the military con-flict areas. In consequence, decrease in concentrations with distance and its relation to molecular weight through pro-portions, diagnostic ratios, analysis of concentration ratio to the background, and back-trajectory analyses support the effect of transport from the military-conflict area to its north.Article Citation - WoS: 17Citation - Scopus: 20Polyoxometalate-Based Hybrid Composites in Multi-Functional Wastewater Treatment Applications(Elsevier, 2023) Recepoğlu, Yaşar Kemal; Gören, Ayşegül Yağmur; Orooji, Yasin; Vatanpour, Vahid; Kudaibergenov, Nurbolat; Khataee, AlirezaThe inorganic polyanionic clusters known as polyoxometalates (POMs) have several structural variations at the nanoscale scale. They have many uses in chemistry, materials science, medicine, and other fields. This review considers the developments in treating hazardous contaminants from wastewater using POMs-based compounds. Four main treatment methods using POM-based compounds to remove water pollutants have been developed: adsorption, photocatalytic treatment, Fenton-like treatment, and membrane separation. Moreover, we report the types of POMs, synthesis procedures, strategies performed to modify POM-based compounds, and their appli-cations in wastewater treatment. To promote the development of these compounds for large-scale production and real-scale applications, gaps in knowledge and recent research obstacles are also pointed out. Most research on metal organic complexes (MOCs) based on POM has focused on using these compounds as catalysts, with little focus on their additional uses. The adsorption and photocatalytic efficiency of modified POM-based compounds are attributed to their enhanced contaminant removal efficiency, and recovery of certain POM-based compounds by magnetic separation is presented as a promising option for their recyclability. Among the reviewed studies, the highest adsorption capacity was 1108.9 mg/g, with a removal efficiency of 100 % for acid red dye using poly-[N,N-dimethyl-dodecyl-(4-vinylbenzyl)ammonium chloride] (PIL)-POM. The studies also indicate that the POM-based adsorbents could be effectively reused to remove pollutants and sustain their activity in 3-10 cycles. This review is believed to provide an overview of recent advancements in POM-based compounds for water and wastewater treatment, offers thorough research to anyone interested in learning more about this topic, and acts as a manual for researchers working in this area.Article Citation - WoS: 15Citation - Scopus: 19Immobilization of Esterase From Bacillus Subtilis on Halloysite Nanotubes and Applications on Dibutyl Phthalate Degradation(Elsevier, 2023) Rosales, Emilio; Pazos, Marta; Sanroman, Maria Angeles; Balcı, Esin; Sofuoğlu, AysunDibutyl phthalate (DBP) is one of the listed phthalic acid esters (PAEs) known as the priority toxicants which exhibit carcinogenic and teratogenic properties and is responsible for endocrine disruption. Therefore, its removal has become a matter to tackle with. In this work, the feasibility of DBP degradation by esterase and lipase enzymes obtained from various microorganisms and the immobilization of the most effective in a clayey material were investigated. Esterase from Bacillus subtilis exhibited the highest degradation efficiency reaching a complete degradation. Its immobilization onto halloysite nanotubes (HNTs) by adsorption method was studied by response surface methodology using a central composite design face-centered. The four selected factors that affect the HNT-enzyme composite generation were: pH, adsorption time, enzyme/HNT (E/H) ratio, and adsorption temperature, and the optimal conditions were determined (pH 7, time 360 min, E/H ratio 0.2, temperature 30oC). Consequently, the activity did not significantly decrease by immobilization, and the adsorption efficiency and relative activity were determined to be 73.15% and 82.7%, respectively. Besides, the immobilization enhanced thermal and storage stability. As for enzyme reusability, after 7 continuous cycles, the composite maintained almost 75% of its initial activity. Both the free enzyme (1 mg/mL) and the composite degraded 100 mg/L DBP with 100% efficiency and several byproducts were detected. Moreover, the composite could be reused for 7 cycles keeping a remarkable catalytic activity. Overall, this study indicated that the HNT-enzyme composite may be used as an effective candidate for remediation of the environmental media contaminated with DBP and other PAEs.(c) 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).Article Citation - WoS: 7Citation - Scopus: 7Insights Into Sustainability of Engineered Carbonaceous Material-Based Technologies for Advanced Cyanide Removal From Wastewater(Elsevier, 2023) Yoon, Yeojoon; Khataee, Alireza; Gören, Ayşegül Yağmur; Recepoğlu, Yaşar KemalCyanide (CN) is a serious concern in industrial and goldmine wastewater. Strict regula-tory standards have been established by various agencies due to the detrimental effects that CN has on human health. Therefore, before discharge to water bodies or land, it is essential to create a sus-tainable model for the safe removal of CN. Carbon-based materials are well known for their adsorption and oxidation features, which can be conducive to CN removal. This paper reviews the relevant literature on the application of modified and unmodified carbon-based materials to CN removal in water; these materials include activated carbon (AC), graphene, graphene oxide (GO), and carbon nanotubes (CNTs). Moreover, CN removal mechanisms and photocatalytic removal of CN are comprehensively discussed, with a particular emphasis on modifying carbon-based materials. It has been observed that adding various elements to carbon-based materials improves their surface area, functional groups, CN adsorption capacity, and pore volume. Impacts of operational parameters, isotherm models, kinetics, and types of carbon-based materials are also outlined. This study provides insight into the real-scale applicability of carbon-based materials for CN removal from waters. Moreover, this review indicates that essential work on CN removal using carbon-based materials is still needed. Future research should focus on developing modified carbon-based materials to encourage multidisciplinary research. The most crucial gap in the literature is that the studies have been performed on a lab scale. Therefore, further pilot and real-scale applica-tions should be conducted. Overall, the cost assessment, environmental effects, and human health risks of carbon-based materials should be studied in future research to achieve a realistic perspective on applicability on an industrial scale.(c) 2023 THE AUTHORS. Published by Elsevier BV on behalf of Faculty of Engineering, Alexandria University This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/ licenses/by-nc-nd/4.0/).Article Citation - WoS: 31Citation - Scopus: 34Insights Into Engineered Graphitic Carbon Nitride Quantum Dots for Hazardous Contaminants Degradation in Wastewater(Elsevier, 2023) Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Vatanpour, Vahid; Yoon, Yeojoon; Khataee, AlirezaIncreased environmental pollution is a critical issue that must be addressed. Photocatalytic, adsorption, and membrane filtration methods are suitable in environmental governance because of their high selectivity, low cost, environment-friendly nature, and excellent treatment efficiency. Graphitic carbon nitride (g-C3N4) quantum dots (QDs) have been considered as photocatalysts, adsorbents, and membrane materials for wastewater treatments, owing to their stability, adsorption capacity, photochemical properties, and low toxicity and cost. This review summarizes g-C3N4 QD synthesis techniques, operating parameters affecting the removal performance in the treatment process, modification effects with other semiconductors, and benefits and drawbacks of g-C3N4 QD-based materials. Furthermore, this review discusses the practical applications of g-C3N4 QDs as adsorbents, photocatalysts, and membrane materials for organic and inorganic contaminant treatments and their value-added product formation potential. Modified g-C3N4 QD-based material adsorbents, photocatalysts, and membranes present potentially applicable effects, such as removal of most waterborne contaminants. Excellent results were obtained for the reduction of methyl orange, bisphenol A, tetracycline, ciprofloxacin, phenol, rhodamine B, E. coli, and Hg. Overall, this paper provides comprehensive background on g-C3N4 QD-based materials and their diverse applications in wastewater treatment, and it presents a foundation for the enhancement of similar unique materials in the future.Article Citation - WoS: 10Citation - Scopus: 12Novel Hybrid Adsorption-Electrodialysis (aded) System for Removal of Boron From Geothermal Brine(American Chemical Society, 2022) Altınbaş, Bekir Fırat; Orak, Ceren; Ökten, Hatice Eser; Yüksel, AslıA novel hybrid adsorption-electrodialysis (AdED) system to remove environmentally harmful boron from geothermal brine was designed and effective operating parameters such as pH, voltage, and flow rate were studied. A cellulose-based adsorbent was synthesized from glycidyl methacrylate (GMA) grafted cellulose and modified with a boron selective n-methyl-d-glucamine (NMDG) group and characterized with SEM-EDX, FT-IR, and TGA analyses. Batch adsorption studies revealed that cellulose-based adsorbent showed a remarkable boron removal capacity (19.29 mg/g), a wide stable operating pH range (2-10), and an adsorption process that followed the Freundlich isotherm (R2= 0.95) and pseudo-second-order kinetics (R2= 0.99). In the hybrid AdED system, the optimum operating parameters for boron removal were found to be a pH of 10, a voltage of 10 V, a flow rate of 100 mL/min, and an adsorbent dosage of 4 g/L. The presence of the adsorbent in the hybrid system increased boron removal from real geothermal brine (containing 199 ppm boron) from 7.2% to 73.3%. The results indicate that the designed AdED system performs better than bare electrodialysis for boron removal from ion-rich real geothermal brine while utilizing environmentally friendly cellulose-based adsorbent.Article Citation - WoS: 4Citation - Scopus: 5Continuous Treatment of Diethyl Hexyl and Dibutyl Phthalates by Fixed-Bed Reactor: Comparison of Two Esterase Bionanocomposites(Elsevier, 2022) Sanroman, Maria Angeles; Balcı, Esin; Rosales, Emilio; Pazos, Marta; Sofuoğlu, AysunThe removal of Diethyl hexyl phthalate (DEHP) and Dibutyl phthalate (DBP) is of great importance due to their potential adverse effects on the environment and human health. In this study, two bionanocomposites prepared by immobilization of Bacillus subtilis esterase by crosslinking to halloysite and supported in chitosan and alginate beads were studied and proposed as a green approach. The esterase immobilization was confirmed by physical-chemical characterization. Bionanocomposite using chitosan showed the best degradation levels in batch tests attaining complete degradation of DBP and around 90% of DEHP. To determine the operational stability and efficiency of the system, two fixed bed reactors filled with both bionanocomposites were carried out operating in continuous mode. Chitosan based bionanocomposite showed the best performance being able to completely remove DBP and more than 85% of DEHP at the different flowrates. These results proved the potential of these synthesized bionanocomposites to effectively remove Phthalic Acid Esters.Article Citation - WoS: 31Citation - Scopus: 35Electrochemical Degradation of Methylene Blue by a Flexible Graphite Electrode: Techno-Economic Evaluation(American Chemical Society, 2022) Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Edebali, Özge; Şahin, Çağrı; Genişoğlu, Mesut; Ökten, Hatice EserIn this study, electrochemical removal of methylene blue (MB) from water using commercially available and low-cost flexible graphite was investigated. The operating conditions such as initial dye concentration, initial solution pH, electrolyte dose, electrical potential, and operating time were investigated. The Box-Behnken experimental design (BBD) was used to optimize the system's performance with the minimum number of tests possible, as well as to examine the independent variables' impact on the removal efficiency, energy consumption, operating cost, and effluent MB concentration. The electrical potential and electrolyte dosage both improved the MB removal efficiency, since increased electrical potential facilitated production of oxidizing agents and increase in electrolyte dosage translated into an increase in electrical current transfer. As expected, MB removal efficiency increased with longer operational periods. The combined effects of operating time-electrical potential and electrical potential-electrolyte concentration improved the MB removal efficiency. The maximum removal efficiency (99.9%) and lowest operating cost (0.012 $/m3) were obtained for initial pH 4, initial MB concentration 26.5 mg/L, electrolyte concentration 0.6 g/L, electrical potential 3 V, and operating time 30 min. The reaction kinetics was maximum for pH 5, and as the pH increased the reaction rates decreased. Consequent techno-economic assessment showed that electrochemical removal of MB using low-cost and versatile flexible graphite had a competitive advantage.Article Citation - Scopus: 22Multi‑purpose Reverse Logistics Network Design for Medical Waste Management in a Megacity: Istanbul, Turkey(Springer, 2022) Balcı, Esin; Balcı, Sezin; Sofuoğlu, AysunIn the study, a multi-purpose reverse logistics network has been designed to create effectual management of medical waste (MW) generated in 39 districts of Istanbul, a heavily populated city, during the COVID-19 pandemic as well as that to be generated in the next decade. With the model, the medical waste management system in Istanbul is analyzed during the pandemic and for the next 10 years. The model attempts to integrate economic, environmental, and social objectives within the sustainable development goals. It aims to maximize the number of personnel and government earnings for the estimated MW of a megacity while minimizing the total fixed cost and the cost of carbon emissions and transportation. The results indicated that the existing facilities are sufficient for the treatment and disposal of MW generated even under pandemic conditions. However, the capacity of the sterilization facility could be insufficient to treat the estimated amount of MW in the next decade. Opening a sterilization facility near the sanitary landfill in Komurcuoda with a total management cost of 62,450,332 €/year would be an optimum solution for Istanbul MW. In comparison to the single-purpose model results, the multi-purpose model resulted in approximately 42,000 € more in total cost. Sensitivity analyses show that the amount of MW has the most significant effect on the total cost. This simple model created an effective MW management proposal for Istanbul, which can be a model for megacities.