Environmental Engineering / Çevre Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4321
Browse
91 results
Search Results
Article Citation - WoS: 6Citation - Scopus: 6A Novel Land Surface Temperature Reconstruction Method and Its Application for Downscaling Surface Soil Moisture With Machine Learning(Elsevier, 2024) Güngör, Şahin; Gündüz, OrhanDownscaling of soil moisture data is important for high resolution hydrological modeling. Most downscaling studies in the literature have used spatially discontinuous land surface temperature (LST) maps as the main auxiliary parameter, which limits the creation of continuous soil moisture maps. The number of studies on soil moisture downscaling with machine learning that use gapless LST maps is limited. With this motivation, a hybrid reconstruction method has been proposed in this study to practically obtain continuous LST maps, which are then used to produce high resolution surface soil moisture (SSM) datasets. The proposed method is shown to have high mean performance with R2 and RMSE values of 0.94 and 1.84°K, respectively, for the period between 2019 and 2022. The developed reconstructed LST maps were then used to downscale original 9 km spatial resolution soil moisture datasets of SMAP L3 and SMAP L4 with Random Forest (RF) machine learning algorithm. The RF model were run with four different rainfall datasets, and the MSWEP rainfall dataset was found to produce the best results. The use of antecedent rainfall values as input variables in machine learning models has been shown to improve the performance of the models R2 0.76 to 0.93. The accuracy of the downscaled data was later evaluated for Western Anatolia Basins (WAB) in Türkiye with 31 in-situ stations. The downscaled SMAP L4 had good average statistical indicators R (0.815 ± 0.1), RMSE (0.09 ± 0.047 cm3/cm3), and ubRMSE (0.058 ± 0.025 cm3/cm3). Downscaled SMAP L3 was also validated with in-situ observations with satisfactory R (0.79 ± 0.074), RMSE (0.09 ± 0.043 cm3/cm3), and ubRMSE (0.06 ± 0.026 cm3/cm3) statistics. Furthermore, the performance of the downscaled SMAP L3 was also cross validated with SMAP + Sentinel 1 (L2) dataset between 2019 and 2022. The mean statistics of R (0.761 ± 0.11) and Root Mean Squared Difference (RMSD) (0.05 ± 0.014 cm3/cm3) between downscaled SMAP L3 and L2 data revealed that the new reconstruction method of LST used in the RF model for downscaling of soil moisture performed well to obtain high resolution soil moisture datasets. The proposed technique also overcame the difficulties associated with coastal regions where data was masked for quality considerations, by not only enhancing overall spatial resolution but also filling these data gaps and giving a complete SSM coverage. © 2024 Elsevier B.V.Article Citation - WoS: 20Citation - Scopus: 24Lime-Activated One-Part Geopolymer Mortars From Construction, Demolition and Industrial Wastes(Elsevier, 2024) Kogbara, Reginald B.; Al-Zubi, Abdelrahman; Mortada, Youssef; Hammoud, Ahmad; Masad, Eyad A.; Khraisheh, Marwan K.This work focused on the production of one-part geopolymer mortars from construction and demolition wastes (CDW) blended with steel slag. Previous related studies on geopolymer production from CDW utilized conventional two-part geopolymers comprised of highly alkaline activator solutions and CDW materials. Thus, the study's significance consists in producing high-strength (≥35 MPa) ambient-cured mortars from CDW with predominantly concrete waste by replacing conventional highly alkaline activator solutions with an environmentally-friendly alkaline activator, Ca(OH)2 powder. Four mortar mixtures were produced with CDW contents ranging from 50 to 65 % dry weight, varying the brick waste content from 3 to 18 %. The effect of elevated temperature (40 °C) curing was also considered. The results showed that 55 % CDW content had optimum performance across all parameters studied such as compressive and flexural strengths, setting time, as well as changes in nuclear magnetic resonance (NMR)-determined pore structure (porosity and mean pore size) and x-ray diffraction (XRD)-determined degree of crystallinity over time. It had 28-day compressive and flexural strengths of 42 and 5.8 MPa, respectively, and initial and final setting times of 25 and 50 min. The importance of sufficient brick waste content in the geopolymer mixtures for effective mechanical performance is highlighted. The inclusion of concrete waste in powder form reduced compressive strength under ambient curing but improved performance at 40 °C curing. It is concluded that sustainable structural mortars can be produced by ‘just adding water’ to an optimized CDW mixture with predominantly concrete waste blended with brick waste and slag and activated by powdered Ca(OH)2. © 2023 The AuthorsArticle Citation - WoS: 19Citation - Scopus: 18An Appraisal of the Local-Scale Spatio-Temporal Variations of Drought Based on the Integrated Grace/Grace-fo Observations and Fine-Resolution Fldas Model(Wiley, 2023) Khorrami, Behnam; Ali, Shoaib; Gündüz, OrhanThe gravity recovery and climate experiment (GRACE) observations have so far been utilized to detect and trace the variations of hydrological extremes worldwide. However, applying the coarse resolution GRACE estimates for local-scale analysis remains a big challenge. In this study, a new version of the fine resolution (1 km) Famine early warning systems network Land Data Assimilation System (FLDAS) model data was integrated into a machine learning model along with the GRACE data to evaluate the subbasin-scale variations of water storage, and drought. With a correlation of 0.99 and a root mean square error (RMSE) of 3.93mm of its results, the downscaling model turned out to be very successful in modelling the finer resolution variations of TWSA. The water storage deficit (WSD) and Water Storage Deficit Index (WSDI) were used to determine the episodes and severity of drought events. Accordingly, two severe droughts (January 2008 to March 2009 and September 2019 to December 2020) were discerned in the Kizilirmak Basin (KB) located in Central Turkiye. The characterization of droughts was evaluated based on WSDI, scPDSI, and model-based drought indices of the soil moisture storage percentile (SMSP) and groundwater storage percentile (GWSP). The results indicated discrepancies in the drought classes based on different indices. However, the WSDI turned out to be more correlated with GWSP, suggesting its high ability to monitor groundwater droughts as well.Conference Object 3d Modeling of a Historical Mine Waste Site Using Uav Images: Estimation of Stockpile Volumes(Springer, 2023) Önal, Okan; Gündüz, OrhanIn recent decades, the use of Unmanned Aerial Vehicles (UAV) for land surveying became very popular because of their simplicity and low cost. Aerial images of the site can be used for the reconstruction of the site’s 3D digital model. Once proper calibrations are made, these digital models can be used for several purposes including stockpile volume estimation, stability analyses, forensic engineering and archiving, etc. In this study, the 3D model of an abandoned historical mine waste disposal site located in Balıkesir-Turkey was reconstructed for the estimation of the waste stockpile volumes. The historical mine site is a facility that was abandoned more than 80 years ago. Mine wastes of different quality were disposed of in and around the site along the hydrologically intermittent creek that passes through the site. No engineered precautions were taken at the site to reduce the environmental impacts and all waste piles were exposed to the natural eroding effect of precipitation and wind. The total amount of the waste volume is not known accurately, which prevents researchers to quantify the potential impacts associated with different waste stockpiles. Thus, a 3D digital model of the site was created by using UAV data obtained from a quadcopter and later processed to obtain a digital topography of the site with an improved accuracy value of ± 2 cm. The stockpiles were later analyzed with geographic information systems to characterize the magnitude of mine wastes and to propose alternative engineering solutions for environmental mitigation. © The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd 2023.Article Citation - WoS: 1Citation - Scopus: 1Exposure To Fumes of a Vegetable Margarine for Frying: Respiratory Effects in an Experimental Model(American Chemical Society, 2023) Cimrin, Arif H.; Alpaydin, Aylin Ozgen; Ozbal, Seda; Toprak, Melis; Yılmaz, Osman; Uluorman, Funda; Ergur, Bekir Uğur; Gürel, Duygu; Sofuoğlu, Sait CemilDeep frying is one of the strongest emission sources into indoor air. A vegetable margarine has recently been used in commercial kitchens. This study investigated the respiratory effects of exposure to its fumes in an experimental model. A setup with glass chambers was constructed. A chamber housed a fryer. The fumes were transported to the other chamber where 24 Wistar albino rats were placed in four randomized groups: acute, subacute, chronic, and control for the exposure durations. PM10 concentration in the exposure chamber was monitored to ensure occupational levels were obtained. Sacrification was performed 24 h after exposure. Lung, trachea, and nasal concha specimens were evaluated by two blinded histologists under a light microscope with hematoxylin–eosin. Mild mononuclear cell infiltration, alveolar capillary membrane thickening, alveolar edema, and diffuse alveolar damage, along with diffuse hemorrhage, edema, and vascular congestion in the interstitium were observed in the acute and subacute groups, and were overexpressed in the chronic group, whereas normal lung histology was observed in the control group. The results indicate that exposure to fumes of vegetable margarine for frying in commercial kitchens may cause pulmonary inflammation that becomes severe as the duration of the exposure increases.Article Fabrication of Superhydrophilic Teos-Lactic Acid Composite Films and Investigation of Biofouling Behaviour(Yıldız Teknik Üniversitesi, 2022) Ervan, Tuğçe; Küçüker, Mehmet Ali; Cengiz, UğurPhytoplankton and diatom microalgae species cause biofouling by adhering to the surfaces, especially in closed cultivation systems such as tubular photobioreactors. This biofilm formation blocks the sunlight; after harvesting, it is necessary to clean the reactor. This cleaning process causes loss not only for time and finance but also in terms of environmental pollution due to using toxic chemicals and excess water usage. This study aimed to investigate the reduction of the microorganism cell adhesion on the hybrid surface. To succeed in this, the composite surface of tetraethoxysilane (TEOS) and lactic acid (LA) was prepared by the sol-gel process. Then the hybrid surfaces were coated on glass slides by the dip coating method. The wettability performance of the TEOS-LA hybrid surface was investigated using contact angle measurement and light transmittance. The wettability result showed that the superhydrophilic surface having 54 mJ/m2 of surface free energy values was obtained. An increase in the lactic acid content of the composite films increased the surface free energy (SFE) values decreasing the water contact angle. A pencil hardness test characterized the mechanical strength of the surfaces, and it was determined that the hardness of the composite films was decreased by increasing the LA content of the composite films. Resultantly, it is found that the TEOS-LA superhydrophilic composite film reduces the adhesion of microalgae.Article Citation - WoS: 17Citation - Scopus: 19Development of Ca(oh)2-Based Geopolymer for Additive Manufacturing Using Construction Wastes and Nanomaterials(Elsevier, 2023) Mortada, Youssef; Masad, Eyad; Kogbara, Reginald B.; Mansoor, Bilal; Seers, Thomas; Hammoud, Ahmad; Karaki, AymanRecent growth in additive manufacturing (AM) or 3D printing in the construction field has motivated the development of various materials that vary in its composition and properties. This paper introduces, characterizes, and evaluates the performance of a sustainable and environmentally friendly geopolymer mixture composed of construction wastes. The geopolymer mixture has calcium hydroxide (Ca(OH)2) as the main alkaline activator and incorporates nanomaterials such as nano-silica and nano-clay to enhance its suitability for AM. The combined use of Ca(OH)2 for alkali activation, and nanomaterials for tailoring the behavior of construction wastes for 3D printing, is novel and addresses the shortcomings of conventional alkaline activators. The paper includes the outcomes of the analysis of the mechanical properties, printability, and microstructure of the geopolymer mixture. The 28-day compressive strength of the mixture reached 42 MPa with ambient temperature curing, which is comparable to traditional geopolymers. The inclusion of 1 wt % of nano-silica accelerated the geopolymerization process and led to the largest (35 %) reduction in the setting time. Similarly, incorporating 1 wt % of nano-clay led to reduction of the thermal conductivity from 0.709 W/mK to 0.505 W/mK, due to the introduction of thermal barriers. The printability of the studied waste-based geopolymer mixture was validated through the successful fabrication of a 3D-printed model. © 2023 The AuthorsArticle Citation - WoS: 21Citation - Scopus: 21Remote Sensing-Based Monitoring and Evaluation of the Basin-Wise Dynamics of Terrestrial Water and Groundwater Storage Fluctuations(Springer, 2023) Khorrami, Behnam; Gündüz, OrhanThe recent dynamics of terrestrial water storage (TWS) and groundwater storage (GWS) fluctuations were investigated based on the Gravity Recovery And Climate Experiment (GRACE) observations over 25 basins of Türkiye. Coarse-resolution GRACE estimates were downscaled based on the Random Forest algorithm. The impacts of precipitation (P) and evapotranspiration (ET) on the variations of water storage were also assessed. The findings demonstrated good performance for the RF model in simulating finer resolution estimates of TWS. The results indicated a diminishing trend of TWS and its hydrologic components over all the basins from 2003 to 2020. The Doğu Akdeniz Basin with the annually decreasing TWS and GWS of 1.15cm/yr and 1.10cm/yr was the most critical basin of Türkiye. The least storage loss was observed in the Batı Karadeniz Basin with the annual TWS and GWS loss of 0.38cm/yr and 0.45cm/yr , respectively. Based on the results, Türkiye has lost, on average, an estimated 5.16km3/yr and 4.09km3/yr of its TWS and GWS, respectively, which are equivalent to the total storage loss of 92.88km3 and 73.62km3 of TWS and GWS during the last 18 years. The results also indicated that P and ET interact differently with the variations of TWS and GWS. The net water flux was revealed to be partially correlated with the total water storage fluctuations, suggesting the governing role of other deriving forces particularly the anthropogenic factors in the spatiotemporal variations of Türkiye’s water storage; therefore, a sector-specific analysis of the water storage variations is crucial for the country, particularly by concentrating more on the dynamics of GWS. Graphical Abstract: [Figure not available: see fulltext.]. © 2023, The Author(s), under exclusive licence to Springer Nature Switzerland AG.Book Part Arsenic Removal by Electrocoagulation(Wiley, 2022) Gören, Ayşegül Yağmur; Kobya, MehmetBecause of the toxic impacts on human health, the arsenic (As) limit value in drinking water was decreased from 50 to 10 ?g l-1 by the relevant authorities (WHO 1993; US EPA 2001). In this case, the problem of As pollution in natural water resources used for drinking water has grown even more and turned into a global crisis. According to reports in many parts of the world, over about 230 million people appear to be affected by high arsenic concentrations in groundwater. In this case, it turned out that there was a great need for cost-effective and environmentally friendly technologies from drinking water sources. One of the emerging water treatment technologies in recent years is electrocoagulation (EC) and it has been seen that it is effective in treating As (>99%) from water and eliminates some of the disadvantages of other conventional treatment processes. EC method includes electro-oxidation of anode electrode materials (iron and aluminum) and in situ production of coagulant agents. From groundwater resources with As content of 5-1000 ?g l-1, As removal efficiencies and operating costs (OCS) of EC technology using iron (Fe) and aluminum (Al) anodes were 85.0-99.9% and 0.0020-1.04 US$ m-3, respectively. Different types (plate, scrap, rod, and ball) of electrodes were used for As removal with the EC process, and it was observed that Fe electrodes or Fe-Al hybrid electrodes performed better in As removal. In addition, it has been determined that arsenate (As(V)) removal is more effective than arsenite (As(III)). A significant quantity of As(III) is oxidized in the EC process, resulting in precipitation, adsorption, and metal-oxy hydroxylic complex reactions. EC process has a lower OC to achieve As removal below the permissible WHO value compared to conventional treatment processes, accomplishing it as a further applicable option for As removal. © 2023 John Wiley & Sons, Inc.Review Citation - WoS: 41Citation - Scopus: 42Review on the Parameters of Recycling Ndfeb Magnets Via a Hydrogenation Process(American Chemical Society, 2023) Habibzadeh, Alireza; Küçüker, Mehmet Ali; Gökelma, MertolRegarding the restrictions recently imposed by China on the export of rare-earth elements (REEs), the world may face a serious challenge in supplying some REEs such as neodymium and dysprosium soon. Recycling secondary sources is strongly recommended to mitigate the supply risk of REEs. Hydrogen processing of magnetic scrap (HPMS) as one of the best approaches for magnet-to-magnet recycling is thoroughly reviewed in this study in terms of parameters and properties. The processes of hydrogen decrepitation (HD) and hydrogenation-disproportio-nation-desorption-recombination (HDDR) are two common methods for HPMS. Employing a hydrogenation process can shorten the production route of new magnets from the discarded magnets compared to other recycling routes such as the hydrometallurgical route. However, determining the optimal pressure and temperature for the process is challenging due to the sensitivity to the initial chemical composition and the interaction of temperature and pressure. Pressure, temperature, initial chemical composition, gas flow rate, particle size distribution, grain size, and oxygen content are the effective parameters for the final magnetic properties. All these influencing parameters are discussed in detail in this review. The recovery rate of magnetic properties has been the concern of most research in this field and can be achieved up to 90% by employing a low hydrogenation temperature and pressure and using additives such as REE hydrides after hydrogenation and before sintering.