Environmental Engineering / Çevre Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4321
Browse
19 results
Search Results
Article Pomza ve Nsdd-pomza ile Sabit Yataklı Kolon Reaktörde Metilen Mavisi Giderimi: Deneysel ve Modelleme Çalışması(2019) Balcı, Esin; Ökten, Hatice Eser; Genişoğlu, Mesut; Recepoğlu, Yaşar Kemal; Gören, Ayşegül YağmurNano sıfır değerlikli demir (nSDD) yüksek renk konsantrasyonlarına sahip tekstil atıksularının arıtımında ekonomik ve çevre dostu bir adsorban olarak ortaya çıkmaktadır. Ancak nSDD partikülleri sulu çözeltilerde elektrostatik etkileşimler sebebiyle kolayca topaklaşmakta ve bu da arıtma veriminin düşmesine neden olmaktadır. Dolayısıyla düşük maliyetli, doğal poröz yapıda ve ortalama 2m2/gr spesifik yüzey alanına sahip pomza, nSDD topaklaşmasını önleyici bir malzeme olarak kullanılabilir. Bu çalışmada sadece pomza ve pomzanSDD (ağırlıkça 9:1) karışımının kullanıldığı kolon reaktörde 25, 50, 75 ve 100 mg/L metilen mavisi konsantrasyonları için arıtma verimleri incelenmiştir. Pomzanın ve pomza-nSDD karışımının 100 mg/L metilen mavisi deneyindeki toplam kapasiteleri sırasıyla 2,8 ve 4,2 mg/g-adsorban olarak bulunmuştur. Özellikle düşük konsantrasyonlarda, pomza-nSDD karışımının arıtma performansını önemli ölçüde arttırdığı görülmüştür. Thomas modeli deneysel verilere uygulanmış ve modelin öngörü gücünün düşük konsantrasyonda yüksekken, yüksek konsantrasyonlarda ortalama olduğu kanısına varılmıştır.Article Soil Contamination by Metals/Metalloids Around an Industrial Region and Associated Human Health Risk Assessment(2024) Demirtepe, HaleIndustrial, agricultural, transportation, and waste management activities cause soil contamination by metals/metalloids. Soil contamination is an essential global concern since it poses a significant risk to human health. Particularly in areas near heavy industry, people are more prone to exposure. This study aims to determine current metal/metalloid contamination levels in soil from Aliağa industrial region and assess associated health risks. Five surface soil samples were collected from the region, representing residential, agricultural areas, and downwind of possible sources. Pollution indices were calculated to determine the metal(loid)s with anthropogenic inputs, and a human health risk assessment was conducted. As a result, significant to extreme enrichment of arsenic (As), moderate to significant enrichment of zinc (Zn) and manganese (Mn), and very high enrichment of lead (Pb) and cadmium (Cd) were observed in soil samples. Possible sources of contamination were iron and steel facilities with electric arc furnaces and oil combustion. Non-carcinogenic risk assessment revealed acceptable risks of exposure to Aliağa soils, while exposure scenarios had a great impact on estimated risks. Arsenic, chromium (Cr), and Pb appeared to be significant contributors to non-carcinogenic risk. Carcinogenic risks associated with exposure to As, Pb, Cr, cobalt (Co), and Cd in soils were evaluated to be at an acceptable level. This study only considered soil exposure pathways; hence, a comprehensive risk assessment is deemed necessary not to underestimate the risk of living around an industrial region. Nevertheless, the study provided crucial information for the current hot spots for metal(loid)s in the region and human exposure level.Article Occurrence of Bromide and Bromate in Chlorinated Indoor Swimming Pools, And Associated Health Risks(Yildiz Technical University, 2023) Dumanoğlu, Y.; Genisoglu, M.; Sofuoglu, S.C.Swimming is a physical activity that is accessible to people of all ages in all seasons. However, continuous organic and inorganic precursor load and disinfectant dosing make pool water chemistry much more complex than other disinfected waters. Carcinogenic bromate compound is one of the hundreds of disinfection by-products in pool water. The occurrence of bromate in pool waters depends on the precursor content of filling water, the disinfection process, operating parameters, and the purity of disinfectants. While the average filling water bromide concentrations of University Campus indoor swimming pool in Gülbahçe –Urla (SP1) and Buca public indoor swimming pool (SP2) were determined to be 182 μg/L and 11.0 μg/L, respectively, the average bromate concentrations of SP1 and SP2 were 59.4 μg/L and 68.3 μg/L. Estimated chronic-toxic health risks of accidental ingestion of pool water during swimming (between 10-3 and 10-1) were lower than the threshold level (‘1’). Although the carcinogenic risks in central tendency scenario (<10-6) indicate negligible risks for swimmers, worst case scenario indicates carcinogenic risks (medians were ranged from 1.61×10-6 to 9.42×10-6) for highly exposed specific swimmer groups. Bromate accumulation in swimming pools needs attention for mitigating the health risks for swimmers. © 2021, Yıldız Technical University.Article Cyanobacterial Communities in Mucilage Collected From Çanakkale Strait (dardanelles): Metagenomic Approach(Çanakkale Onsekiz Mart Üniversitesi, 2022) Yılmaz, Sevdan; Kahraman Yılmaz, Dilek; Çelik, Ekrem Şanver; Küçüker, Mehmet AliIn this study, cyanobacterial communities in mucilage samples collected from three stations in the Dardanelles Strait were analyzed with a metagenomic approach. Mucilage samples were collected at the beginning of June 2021 from three points of the Dardanelles (Station 1: 40°6'42.78"N, 26°23'57.00"E; Station 2: 40°9'8.09"N, 26°24'16.19"E; Station 3: 40°6 '21.62"N, 26°22'41.25"E). The dominant cyanobacteria were Prochlorococcus marinus (39.17%), Synechococcus sp. (20.85%), Lyngbya sp. (12.00%), Trichodesmium erythraeum (7.33%), Aphanocapsa sp. (4.33%) and Leptolyngbya sp. (3.33%), which constituted 87.00 % of the total number of sequences. In this study, cyanobacteria species that can cause harmful algal blooms and have toxic effects on the mucilage structure have been determined. The Marmara Sea and the Dardanelles Strait, which have been affected by serious disturbances, including industrial activities, anthropogenic impacts, tourism and artificial lighting, will never be fully restored to their former ecological state. In addition, cyanobacteria species in the mucilage may cause harmful algal blooms and have toxic effects that threaten the future well-being of coastal populations and ecosystem stability. Thus, the government and local authorities should pay more attention to combating the mucilage.Book Part Arsenic Removal by Electrocoagulation(Wiley, 2022) Gören, Ayşegül Yağmur; Kobya, MehmetBecause of the toxic impacts on human health, the arsenic (As) limit value in drinking water was decreased from 50 to 10 ?g l-1 by the relevant authorities (WHO 1993; US EPA 2001). In this case, the problem of As pollution in natural water resources used for drinking water has grown even more and turned into a global crisis. According to reports in many parts of the world, over about 230 million people appear to be affected by high arsenic concentrations in groundwater. In this case, it turned out that there was a great need for cost-effective and environmentally friendly technologies from drinking water sources. One of the emerging water treatment technologies in recent years is electrocoagulation (EC) and it has been seen that it is effective in treating As (>99%) from water and eliminates some of the disadvantages of other conventional treatment processes. EC method includes electro-oxidation of anode electrode materials (iron and aluminum) and in situ production of coagulant agents. From groundwater resources with As content of 5-1000 ?g l-1, As removal efficiencies and operating costs (OCS) of EC technology using iron (Fe) and aluminum (Al) anodes were 85.0-99.9% and 0.0020-1.04 US$ m-3, respectively. Different types (plate, scrap, rod, and ball) of electrodes were used for As removal with the EC process, and it was observed that Fe electrodes or Fe-Al hybrid electrodes performed better in As removal. In addition, it has been determined that arsenate (As(V)) removal is more effective than arsenite (As(III)). A significant quantity of As(III) is oxidized in the EC process, resulting in precipitation, adsorption, and metal-oxy hydroxylic complex reactions. EC process has a lower OC to achieve As removal below the permissible WHO value compared to conventional treatment processes, accomplishing it as a further applicable option for As removal. © 2023 John Wiley & Sons, Inc.Article Characterization of Asbestos in Ambient Air During Refractory Material Production From Magnesite Ore(Çanakkale Onsekiz Mart Üniversitesi, 2021) Küçüker, Mehmet AliAsbestos is a general term employed for crystallized silicate minerals in fibril form. It can be commonly found in nature and from which fibre uses in the industry through processing are obtained. It is dielectric and fibrous, having an elastic feature. However, there is limited information about the air quality in terms of asbestos for the companies that produce refractory materials from magnesite ore. This deficiency in the literature can be eliminated with this study for a company with high quality and durable refractory materials. Among the most commonly used asbestos analysis are scanning electron microscope (SEM), transmission electron microscope (TEM). Asbestos analyses have been performed in two different institutions on the parallel samples whose preliminary processes have been completed. According to the results of the examinations conducted by SEM, 23 of the fibrils observed in a total area are bigger than five µmin lengths and less than 3 µm in width. Three of these fibrils were observed to have the characteristics of chrysotile fibres morphemically and elementally. In addition, airborne samples were analyzed using a TEM instrument. According to the results obtained, 13 of the fibrils observed in total were bigger than 5 µm in length and less than 3 µm in width and based on ED analysis and elemental composition (EDXA) results of these fibrils, and they were not observed to have the characteristics of chrysotile fibres. The majority of the fibrils observed were noted to be other inorganic minerals (lizardite) fibrils. Additionally, the obtained results show that the asbestos concentration in the air is below the limit specified by the provision (0,1 fiber/cm3).Book Part Citation - Scopus: 3Biogas Production From Aquatic Biomass(Elsevier, 2022) Wieczorek, Nils; Kosheleva, Arina; Kuchta, Kerstin; Önen Çınar, Senem; Küçüker, Mehmet AliThe use of aquatic biomass such as algae, macrophytes, or submerged macrophytes as raw material for biogas production has numerous technical and biological advantages. In addition, synergy effects can be exploited taking into account the implementation of biogas systems in urban areas, and coupling between the production of aquatic biomass, biogas production, and urban material flows can be established. Aquatic biomass, which can be the residue of downstream processes or collected from water bodies in cities, represents an excellent opportunity for both material and energy needs. Anaerobic digestion is a widely implemented technology that is already proven for the treatment of various biomasses. Several studies showed that aquatic biomass is a valuable substrate with its high methane yield, especially codigestion processes. This chapter represents the main idea of the anaerobic digestion process while focusing on the features of the aquatic biomass applications in this process.Book Part Impacts of Remediation of Halogenated Organic Compounds in Soils and Sediments(IGI Global, 2022) Demirtepe, HaleHalogenated hydrophobic organic compounds (HOCs) have been used in various industrial applications and are present in many commercial products. Due to their emissions during manufacturing and discharges as wastes, halogenated HOCs such as polychlorinated biphenyls and polybrominated diphenyl ethers are ubiquitously found in the environment and create contaminated sites. To remove the contamination from these sites, various remediation techniques have been useful. The purpose of this chapter is to investigate the impacts of traditional and emerging remediation techniques on ecosystem. One of the traditional remediation techniques is dredging and the mostly studied emerging remediation techniques are bioaugmentation and biostimulation. The efficiency of these techniques is also evaluated regarding reduction in contaminant mass. Overall, this chapter presents the efficiency and possible impacts of dredging, bioaugmentation and biostimulation of soils and sediments, and the implications include the evaluation of most feasible remediation techniques by using life cycle assessment.Book Part Citation - Scopus: 32Language of Response Surface Methodology as an Experimental Strategy for Electrochemical Wastewater Treatment Process Optimization(Elsevier, 2022) Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Khataee, AlirezaThe availability and accessibility to safe and secure water resources are the key technological and scientific concerns of global significance. As a result of water scarcity worldwide, wastewater treatment and reuse are considered viable options to replace freshwater resources in agricultural irrigation and domestic and industrial purposes. A significant need for clean water has promoted the invention and/or enhancement of several electrochemical wastewater treatment (EWT) processes. Optimization of the process variables plays a crucial role in wastewater treatment to enhance technology performance, considering removal efficiency, operating cost, and environmental impacts. These processes are fundamentally complex multivariable, and the optimization through conventional methods is unreliable, inflexible, and time- and material-consuming. In this perspective, response surface methodology (RSM) appears to be a beneficial statistical experimental strategy for the performance optimization of the EWT process. This model could be utilized for the optimization and analysis of the individual and/or combined effects of operational variables on the treatment process to improve the system performance. Furthermore, this model provides a number of information from a slight number of experimental trials. In this chapter, a summary and a discussion are presented on the RSM model used in the electrochemical wastewater treatment processes to overcome process crucial challenges toward the optimization and modeling of process parameters. It provides a potential model to enhance the various types of wastewater treatment process performance with effective optimization. Overall, it is described that the RSM model can be used in EWT processes to find the optimum conditions.Article Shotgun Metagenomic Analysis for Mucilage in the Surface Waters of the Çanakkale Strait (dardanelles): Metabolic Diversity, Microbial Community Structure and Antibiotic Resistance Genes(2021) Yılmaz, Sevdan; Kahraman, Dilek; Çelik, Ekrem Şanver; Küçüker, Mehmet AliIn this study, we used shotgun metagenome sequencing to examine the metabolic diversity, microbial community structure and diverse antimicrobial resistance genes of mucilage in the surface waters of the Çanakkale Strait (Dardanelles). Mucilage samples were collected in April 2021 from the three different stations of the Dardanelles. The dominant microbial communities at the phylum level were Bacteroidetes (20.06%), Proteobacteria (13.68%), Verrucomicrobia (6.25%), Planctomycetes (3.02%) and Cyanobacteria (2.5%). Metabolic pathway analysis using KEGG (Kyoto Encyclopedia of Genes and Genomes) revealed that most of the genes of mucilage samples were involved in unclassified (73.86%) followed by metabolism (14.45%), genetic information processing (4.16%), environmental information processing (2.57%), cellular processing (1.88%), human diseases (1.61%), and organismal systems (1.47%). The dfrA3 gene was the most prevalent (20.36%) followed by CRP (18.17%), PmrE (14.92%), rpoB2 (11.17%), SoxR (7.49%), AbeS (6.83%), baeR (5.22%), PmrF (3.70%), dfrA22 (2.20%), dfrA26 (1.76%), dfrA20 (1.63%), golS (1.26%), CAT (1.03%), mtrA (1.01%), TMB-1 (0.64%), novA (0.64%), dfrK (0.59%), vanXB (0.48%), dfrG (0.39%), FosC2 (0.31%), and MexA (0.20%) genes. Antibiotic resistance gene (ARG) types mainly included the resistance genes of multidrug (40.19%), trimethoprim (26.93%), polymyxin (18.62%), rifamycin (11.17%), chloramphenicol (1.03%), aminocoumarin (0.64%), beta-lactamase (0.64%), fosfomycin (0.31%), and vancomycin (0.48%). Antibiotic-resistant bacteria in mucilage can adhere to human skin during swimming, fishing, water sports etc., enter the body through the nose and mouth, and transfer genetic information to the bacteria in contact areas in the human body. Therefore, this situation is risky in public health, and necessary precautions should be taken. In the light of these findings, it has been observed that there is a need for more detailed studies in the future.