Environmental Engineering / Çevre Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4321
Browse
35 results
Search Results
Now showing 1 - 10 of 35
Article Pomza ve Nsdd-pomza ile Sabit Yataklı Kolon Reaktörde Metilen Mavisi Giderimi: Deneysel ve Modelleme Çalışması(2019) Balcı, Esin; Ökten, Hatice Eser; Genişoğlu, Mesut; Recepoğlu, Yaşar Kemal; Gören, Ayşegül YağmurNano sıfır değerlikli demir (nSDD) yüksek renk konsantrasyonlarına sahip tekstil atıksularının arıtımında ekonomik ve çevre dostu bir adsorban olarak ortaya çıkmaktadır. Ancak nSDD partikülleri sulu çözeltilerde elektrostatik etkileşimler sebebiyle kolayca topaklaşmakta ve bu da arıtma veriminin düşmesine neden olmaktadır. Dolayısıyla düşük maliyetli, doğal poröz yapıda ve ortalama 2m2/gr spesifik yüzey alanına sahip pomza, nSDD topaklaşmasını önleyici bir malzeme olarak kullanılabilir. Bu çalışmada sadece pomza ve pomzanSDD (ağırlıkça 9:1) karışımının kullanıldığı kolon reaktörde 25, 50, 75 ve 100 mg/L metilen mavisi konsantrasyonları için arıtma verimleri incelenmiştir. Pomzanın ve pomza-nSDD karışımının 100 mg/L metilen mavisi deneyindeki toplam kapasiteleri sırasıyla 2,8 ve 4,2 mg/g-adsorban olarak bulunmuştur. Özellikle düşük konsantrasyonlarda, pomza-nSDD karışımının arıtma performansını önemli ölçüde arttırdığı görülmüştür. Thomas modeli deneysel verilere uygulanmış ve modelin öngörü gücünün düşük konsantrasyonda yüksekken, yüksek konsantrasyonlarda ortalama olduğu kanısına varılmıştır.Book Part Arsenic Removal by Electrocoagulation(Wiley, 2022) Gören, Ayşegül Yağmur; Kobya, MehmetBecause of the toxic impacts on human health, the arsenic (As) limit value in drinking water was decreased from 50 to 10 ?g l-1 by the relevant authorities (WHO 1993; US EPA 2001). In this case, the problem of As pollution in natural water resources used for drinking water has grown even more and turned into a global crisis. According to reports in many parts of the world, over about 230 million people appear to be affected by high arsenic concentrations in groundwater. In this case, it turned out that there was a great need for cost-effective and environmentally friendly technologies from drinking water sources. One of the emerging water treatment technologies in recent years is electrocoagulation (EC) and it has been seen that it is effective in treating As (>99%) from water and eliminates some of the disadvantages of other conventional treatment processes. EC method includes electro-oxidation of anode electrode materials (iron and aluminum) and in situ production of coagulant agents. From groundwater resources with As content of 5-1000 ?g l-1, As removal efficiencies and operating costs (OCS) of EC technology using iron (Fe) and aluminum (Al) anodes were 85.0-99.9% and 0.0020-1.04 US$ m-3, respectively. Different types (plate, scrap, rod, and ball) of electrodes were used for As removal with the EC process, and it was observed that Fe electrodes or Fe-Al hybrid electrodes performed better in As removal. In addition, it has been determined that arsenate (As(V)) removal is more effective than arsenite (As(III)). A significant quantity of As(III) is oxidized in the EC process, resulting in precipitation, adsorption, and metal-oxy hydroxylic complex reactions. EC process has a lower OC to achieve As removal below the permissible WHO value compared to conventional treatment processes, accomplishing it as a further applicable option for As removal. © 2023 John Wiley & Sons, Inc.Article Citation - WoS: 17Citation - Scopus: 20Polyoxometalate-Based Hybrid Composites in Multi-Functional Wastewater Treatment Applications(Elsevier, 2023) Recepoğlu, Yaşar Kemal; Gören, Ayşegül Yağmur; Orooji, Yasin; Vatanpour, Vahid; Kudaibergenov, Nurbolat; Khataee, AlirezaThe inorganic polyanionic clusters known as polyoxometalates (POMs) have several structural variations at the nanoscale scale. They have many uses in chemistry, materials science, medicine, and other fields. This review considers the developments in treating hazardous contaminants from wastewater using POMs-based compounds. Four main treatment methods using POM-based compounds to remove water pollutants have been developed: adsorption, photocatalytic treatment, Fenton-like treatment, and membrane separation. Moreover, we report the types of POMs, synthesis procedures, strategies performed to modify POM-based compounds, and their appli-cations in wastewater treatment. To promote the development of these compounds for large-scale production and real-scale applications, gaps in knowledge and recent research obstacles are also pointed out. Most research on metal organic complexes (MOCs) based on POM has focused on using these compounds as catalysts, with little focus on their additional uses. The adsorption and photocatalytic efficiency of modified POM-based compounds are attributed to their enhanced contaminant removal efficiency, and recovery of certain POM-based compounds by magnetic separation is presented as a promising option for their recyclability. Among the reviewed studies, the highest adsorption capacity was 1108.9 mg/g, with a removal efficiency of 100 % for acid red dye using poly-[N,N-dimethyl-dodecyl-(4-vinylbenzyl)ammonium chloride] (PIL)-POM. The studies also indicate that the POM-based adsorbents could be effectively reused to remove pollutants and sustain their activity in 3-10 cycles. This review is believed to provide an overview of recent advancements in POM-based compounds for water and wastewater treatment, offers thorough research to anyone interested in learning more about this topic, and acts as a manual for researchers working in this area.Article Citation - WoS: 7Citation - Scopus: 7Insights Into Sustainability of Engineered Carbonaceous Material-Based Technologies for Advanced Cyanide Removal From Wastewater(Elsevier, 2023) Yoon, Yeojoon; Khataee, Alireza; Gören, Ayşegül Yağmur; Recepoğlu, Yaşar KemalCyanide (CN) is a serious concern in industrial and goldmine wastewater. Strict regula-tory standards have been established by various agencies due to the detrimental effects that CN has on human health. Therefore, before discharge to water bodies or land, it is essential to create a sus-tainable model for the safe removal of CN. Carbon-based materials are well known for their adsorption and oxidation features, which can be conducive to CN removal. This paper reviews the relevant literature on the application of modified and unmodified carbon-based materials to CN removal in water; these materials include activated carbon (AC), graphene, graphene oxide (GO), and carbon nanotubes (CNTs). Moreover, CN removal mechanisms and photocatalytic removal of CN are comprehensively discussed, with a particular emphasis on modifying carbon-based materials. It has been observed that adding various elements to carbon-based materials improves their surface area, functional groups, CN adsorption capacity, and pore volume. Impacts of operational parameters, isotherm models, kinetics, and types of carbon-based materials are also outlined. This study provides insight into the real-scale applicability of carbon-based materials for CN removal from waters. Moreover, this review indicates that essential work on CN removal using carbon-based materials is still needed. Future research should focus on developing modified carbon-based materials to encourage multidisciplinary research. The most crucial gap in the literature is that the studies have been performed on a lab scale. Therefore, further pilot and real-scale applica-tions should be conducted. Overall, the cost assessment, environmental effects, and human health risks of carbon-based materials should be studied in future research to achieve a realistic perspective on applicability on an industrial scale.(c) 2023 THE AUTHORS. Published by Elsevier BV on behalf of Faculty of Engineering, Alexandria University This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/ licenses/by-nc-nd/4.0/).Article Citation - WoS: 12Citation - Scopus: 14Identifying Geogenic and Anthropogenic Aluminum Pollution on Different Spatial Distributions and Removal of Natural Waters and Soil in Çanakkale, Turkey(Amer Chemical Soc, 2023) Hızlı, Sezin; Koraoğlu, Aybike Gül; Gören, Ayşegül Yağmur; Kobya, MehmetThe Canakkale-Kirazli region (Turkey) is enriched with minerals, especially aluminum (Al), which dangerously get transported into aquatic media due to several mining and geological activities in recent years. In this study, Al and other potentially toxic metals (PTMs) including B, Ba, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Si, and Zn, in both water and soil samples, were measured for quality determination. Selected metals were also analyzed by the enrichment factor (EF), the geoaccumulation index (I-geo), the contamination factor (CF), and the pollution load index (PLI) to evaluate both water and soil pollution geogenically or anthropogenically. Also, the metals were clustered to support the pollution source with Pearson's correlation, principal component analysis (PCA), and hierarchical cluster analysis (HCA). Forty-five natural water samples and 12 soil samples were collected spatially. To perform pollution assessment, two fundamental treatment processes to remove Al pollution from the sample including the highest Al concentration (38.38 mg/L) in water were applied: (1) precipitation with pH adjustment and (2) removal with ion exchange. The pH values of water samples were changed in the range of 3-9 to test the dissolution of Al. The results demonstrated that the study area was mostly under the influence of geogenic aluminum pollution.Article Citation - WoS: 31Citation - Scopus: 34Insights Into Engineered Graphitic Carbon Nitride Quantum Dots for Hazardous Contaminants Degradation in Wastewater(Elsevier, 2023) Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Vatanpour, Vahid; Yoon, Yeojoon; Khataee, AlirezaIncreased environmental pollution is a critical issue that must be addressed. Photocatalytic, adsorption, and membrane filtration methods are suitable in environmental governance because of their high selectivity, low cost, environment-friendly nature, and excellent treatment efficiency. Graphitic carbon nitride (g-C3N4) quantum dots (QDs) have been considered as photocatalysts, adsorbents, and membrane materials for wastewater treatments, owing to their stability, adsorption capacity, photochemical properties, and low toxicity and cost. This review summarizes g-C3N4 QD synthesis techniques, operating parameters affecting the removal performance in the treatment process, modification effects with other semiconductors, and benefits and drawbacks of g-C3N4 QD-based materials. Furthermore, this review discusses the practical applications of g-C3N4 QDs as adsorbents, photocatalysts, and membrane materials for organic and inorganic contaminant treatments and their value-added product formation potential. Modified g-C3N4 QD-based material adsorbents, photocatalysts, and membranes present potentially applicable effects, such as removal of most waterborne contaminants. Excellent results were obtained for the reduction of methyl orange, bisphenol A, tetracycline, ciprofloxacin, phenol, rhodamine B, E. coli, and Hg. Overall, this paper provides comprehensive background on g-C3N4 QD-based materials and their diverse applications in wastewater treatment, and it presents a foundation for the enhancement of similar unique materials in the future.Article Citation - WoS: 13Citation - Scopus: 14Boron Removal From Geothermal Brine Using Hybrid Reverse Osmosis/Microbial Desalination Cell System(Elsevier, 2023) Jarma, Yakubu A.; Kabay, Nalan; Baba, Alper; Ökten, Hatice Eser; Gören, Ayşegül YağmurAgriculture sector leads worldwide as the most water consuming sector with water demand. Since natural water resources cannot keep up with the demand, a shift from conventional water resources to unconventional ones is needed. While geothermal water was gaining importance for its energy content, small-scale (<10 L/s) energy plants were not required to reinject their spent geothermal brine. As geothermal resources align with agricultural areas in Western Anatolia, discharge of untreated brine might have severe adverse effects on crop yields and soil quality. In this study, we investigated use of spent geothermal brine for irrigation after treatment with Reverse Osmosis/Microbial Desalination Cell (RO/MDC) hybrid process. Treatment efficiencies for B, COD, As, Li, Fe, Cr concentrations and energy production values were determined. Treated water was initially evaluated for irrigation considering three quality categories (I, II, and III) comprised of parameters such as electrical conductivity (EC), total dissolved solids (TDS), and sodium adsorption ratio (SAR), along with sodium, chloride and boron concentrations. Additionally, magnesium adsorption ratio (MAR) and permeability index (PI) were used to evaluate for irrigation suitability. Although B concentrations in MDC-treated permeate (3.29 mg/L) and concentrate (2.99 mg/L) streams were not low enough to meet Quality I criterion (<0.7 mg/L), they can be still utilized in irrigation of moderate-to-high tolerant plants. Furthermore, PI and MAR parameters pointed to suitability for irrigational use. © 2022Article Citation - WoS: 13Citation - Scopus: 13Countrywide Spatial Variation of Potentially Toxic Element Contamination in Soils of Turkey and Assessment of Population Health Risks for Nondietary Ingestion(American Chemical Society, 2022) Gören, Ayşegül Yağmur; Genişoğlu, Mesut; Kazancı, Yiğithan; Sofuoğlu, Sait CemilCountrywide surface soil concentrations of potentially toxic elements (PTEs) in Turkey were reviewed in the Web of Science database. A total of 93 papers were investigated to compose a PTE dataset for determining spatial variations and estimating exposure and health risks. Al, As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn were selected as PTEs in surface soil. A compiled PTE concentration dataset was used to estimate chronic toxic risks (CTRs) and carcinogenic risks (CRs) according to the deterministic and probabilistic approaches. While the CTR and CR levels of age and sex groups were estimated using a deterministic approach, population risks were estimated using a probabilistic approach. CTR and CR levels in lower age groups and female sex groups were estimated to be higher than those in higher age groups and associated male sex groups. The average CTR levels of the nondietary ingestion of As-containing soil in <11 year age groups were near/just above the threshold level, while As-associated average CR levels of adults and other age groups were estimated to be in the acceptable risk range (10-6 < CR < 10-5) and low priority risk range (10-5 < CR < 10-4), respectively. As-, Cr(VI)-, and Pb-associated upper-bound CR levels of the Turkish population were simulated to be 5.14 × 10-4, 6.23 × 10-5, and 2.34 × 10-6, respectively. Health risk models show the significance of As in both chronic toxic and carcinogenic effects.Article Citation - WoS: 31Citation - Scopus: 35Electrochemical Degradation of Methylene Blue by a Flexible Graphite Electrode: Techno-Economic Evaluation(American Chemical Society, 2022) Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Edebali, Özge; Şahin, Çağrı; Genişoğlu, Mesut; Ökten, Hatice EserIn this study, electrochemical removal of methylene blue (MB) from water using commercially available and low-cost flexible graphite was investigated. The operating conditions such as initial dye concentration, initial solution pH, electrolyte dose, electrical potential, and operating time were investigated. The Box-Behnken experimental design (BBD) was used to optimize the system's performance with the minimum number of tests possible, as well as to examine the independent variables' impact on the removal efficiency, energy consumption, operating cost, and effluent MB concentration. The electrical potential and electrolyte dosage both improved the MB removal efficiency, since increased electrical potential facilitated production of oxidizing agents and increase in electrolyte dosage translated into an increase in electrical current transfer. As expected, MB removal efficiency increased with longer operational periods. The combined effects of operating time-electrical potential and electrical potential-electrolyte concentration improved the MB removal efficiency. The maximum removal efficiency (99.9%) and lowest operating cost (0.012 $/m3) were obtained for initial pH 4, initial MB concentration 26.5 mg/L, electrolyte concentration 0.6 g/L, electrical potential 3 V, and operating time 30 min. The reaction kinetics was maximum for pH 5, and as the pH increased the reaction rates decreased. Consequent techno-economic assessment showed that electrochemical removal of MB using low-cost and versatile flexible graphite had a competitive advantage.Article Citation - WoS: 8Citation - Scopus: 8Removal of Arsenic in Groundwater From Western Anatolia, Turkey Using an Electrocoagulation Reactor With Different Types of Iron Anodes(Elsevier, 2022) Kobya, Mehmet; Dolaz, Mustafa; Özaydın Şenol, Burcu; Gören, Ayşegül YağmurElectrocoagulation (EC) is a significantly efficient method for As removal from waters and received considerable attention recently. In this study, the natural groundwater (GW) samples containing As concentrations of GW-1: 538.8 μg L−1, GW-2: 1132.1 μg L−1, and GW-3: 52, 000 μg L−1 were obtained from different provinces and treated by EC process using different iron anodes (plate, ball, and scrap). To achieve drinking water As standard (10 μg L−1), the operational time, applied current, and As removal optimization for all anode types were studied. At applied current of 0.025 A, the As removal efficiency, EC time, and operating cost were >99.9%, 180 min and 0.406 $ m−3 for ball anodes, >99.9%, 100 min and 0.0813 $ m−3 for plate anodes, >99.9%, 80 min and 0.0815 $ m−3 for scrap anodes for GW-3, respectively. It was observed that as the As concentration in the GW increased, the EC time and operating cost increased. Overall, it was concluded that Fe scrap anodes are more advantageous than other types of anodes in terms of operating cost in EC reactor for As removal.