Conservation and Restoration of Cultural Heritage / Kültür Varlıklarını Koruma ve Onarım
Permanent URI for this collectionhttps://hdl.handle.net/11147/23
Browse
17 results
Search Results
Article Citation - WoS: 171Characteristics of Brick Used as Aggregate in Historic Brick-Lime Mortars and Plasters(Elsevier Ltd., 2006) Böke, Hasan; Akkurt, Sedat; İpekoğlu, Başak; Uğurlu, ElifMortars and plasters composed of a mixture of brick powder and lime have been used since ancient times due to their hydraulic properties. In this study, raw material compositions, basic physical, mineralogical, microstructural and hydraulic properties of some historic Ottoman Bath brick-lime mortars and plasters were determined by XRD, SEM-EDS, AFM, TGA and chemical analyses. The mineralogical and chemical compositions, microstructures, morphologies and pozzolanicities of the brick powders and fragments used as aggregates in the mortars and plasters were examined to find out the relationship between hydraulic properties of the mortars and the bricks. The characteristics of bricks used in the bath domes were also determined to investigate whether the brick aggregates used in mortar and plasters were prepared from these bricks. The results indicated that the mortars and plasters were hydraulic owing to the presence of crushed brick powders that have good pozzolanicity. The brick powders bad high pozzolanicity because they contained high amounts of calcium-poor clay minerals in their raw materials that were fired at low temperatures. On the other hand, bricks used in the domes had poor pozzolanicity with different mineralogical and chemical compositions from bricks used in mortars and plasters. Based on the results of the analysis, it was thought that the bricks manufactured with high amounts of clays were consciously chosen in the preparation of hydraulic mortars and plasters. (C) 2006 Elsevier Ltd. All rights reserved.Article Citation - WoS: 20Citation - Scopus: 21Long Term Stability of Biodegradable Polymers on Building Limestone(Elsevier Ltd., 2019) Kaplan, Zişan; Böke, Hasan; Sofuoğlu, Aysun; İpekoğlu, BaşakSynthetic polymers can be replaced by biodegradable ones as adhesives, water repellents and consolidants on the stone surfaces and facades of the historic buildings in their conservation to minimize future deterioration. In this study, the long-term stability of two biodegradable polymers, polyhydroxybutyrate (PHB) and poly-L-lactide (PLA), and an acrylic polymer (Paraloid B72) which is commonly used in conservation works of artefacts, were evaluated on limestone using a UV lamp-weathering chamber (up to 104 days) for future protection studies. Chemical and morphological changes induced by an accelerated weathering test were examined by Fourier Transform Infrared spectroscopy (FT-IR) and Scanning Electron Microscopy (SEM) analyses. Protection efficiency of the polymers was determined by the changes in color, capillary water absorption, static contact angle on limestone. Paraloid B72, PHB, and PLA coatings significantly increased hydrophobicity while decreasing capillarity water absorption and caused negligible change in the color of the limestone. Protection efficiencies of PLA and PHB polymers were almost the same as that of Paraloid B72, a widely used acrylic polymer. However, PLA and PHB seemed to be favorable polymers as protective agents due to their reversibility and biodegradability, low chromatic changes, good hydrophobic behavior and good stability to weathering in reducing the effects of outdoor exposure on limestone surfaces.Article Citation - WoS: 16Citation - Scopus: 19An Evaluation of Decision-Making Process on Maintenance of Built Cultural Heritage: the Case of Visby, Sweden(Elsevier Ltd., 2019) Eken, Esra; Taşcı, Burcu; Gustafsson, ChristerPreventive conservation is a significant approach for the conservation of built cultural heritage. This approach aims to prevent major deteriorations through monitoring and a planned maintenance programme. Although Visby, as one of the most important world heritage sites of Sweden, has many governmental organizations for conservation, none has a particular focus on maintenance. This paper examines the perspective of the habitants about the maintenance of their dwellings in the World Heritage Site of Visby. In this context, a survey is carried out to determine the main tendency of the habitants regarding the maintenance of historic buildings inside the city walls. Thus, the survey requires not only quantitative methods based on statistical data, but also qualitative methods based on interpretative data. The questionnaire conducted with the owners and tenants is the primary data collection tool. Both the owners and the tenants agree with the necessity of a non-governmental organisation in Visby to provide advice on maintenance. Maintenance and regular monitoring prevent costlier and large-scale repairs and are essential to retaining the cultural significance of Visby. This study can be helpful for adopting the community's opinion to the regular maintenance programme and promoting cooperation between non-profit organizations and governmental organizations in cultural heritage.Article Citation - WoS: 8Citation - Scopus: 10Interior Plastering of Ottoman Bath Buildings(Elsevier Ltd., 2019) İpekci, Emre; Uğurlu Sağın, Elif; Böke, HasanOttoman baths were peculiar buildings with their function in community life, architectural characteristics and material use. Their interior spaces were exposed to high humidity and temperatures that made the building structure vulnerable to physical, chemical, physicochemical and biological degradations. Plasters used on the interior wall surfaces were the most important agents to protect the structure from deterioration and provide durability. This study aims to exhibit the plaster characteristics of Çinili Bath in İstanbul which was an outstanding example of Ottoman baths and built by Great Architect Sinan. Basic physical properties, raw material compositions, mineralogical, microstructural and hydraulic properties of original brick-lime plasters called as horasan (khorasan) plasters used on the walls were determined by XRF, XRD, SEM-EDS and TGA. Multilayered plaster application together with the use of glazed tiles were observed on the wall surfaces of all interior spaces. The plasters were produced from pure lime and pozzolanic crushed brick or tile aggregates and hydraulic because of the pozzolanic properties of aggregates. They are stiff, compact and durable in hot and humid conditions of bath buildings due to their self-healing properties and the formation of calcium silicate hydrates and calcium aluminate hydrates at the lime-brick interfaces and in the pores of the pozzolanic brick aggregates by the reaction of lime. Characteristics of brick aggregates were compared with the construction bricks used in the building. Their chemical and mineralogical compositions revealed that the aggregates had not been produced from construction bricks. All the results indicated that brick-lime plasters were the most suitable materials for bath buildings to protect the structure from the effect of water. © 2019 The AuthorsArticle Citation - WoS: 19Citation - Scopus: 20Execution Technique and Pigment Characteristics of Byzantine Wall Paintings of Anaia Church in Western Anatolia(Elsevier Ltd., 2018) Demir, Serap; Şerifaki, Kerem; Böke, HasanIn this study, material characteristics of wall paintings executed in 11th Century Byzantine Church located in archaeological site of Anaia (Turkey) were investigated to provide historical information of the painting techniques. For this purpose, physical, chemical and mineralogical compositions of the paintings were determined by X-Ray Diffraction, Fourier Transform Infrared spectroscopy, Scanning Electron Microscopy coupled with Energy Dispersive spectroscopy and Thermo-Gravimetric Analysis. Analysis results indicated that the paintings were executed using lime-secco technique. In this technique, pigments were mixed with lime and applied on a smooth plaster layer. Pigments used were mainly iron oxides for red, yellow and purple paintings, aluminosilicates such as celadonite for green paintings and lazurite for dark blue paintings.Article Citation - WoS: 1Citation - Scopus: 1Photogrammetric Evaluation Options of an Ancient Monument for Different Survey Levels(Elsevier Ltd., 2016) Uygun, Funda; Turan, Mine; Ocalı, OganRecently, for the purpose of data management, more advanced digital data are required for different survey levels of irregular ancient monuments. For irregularly formed monuments and amorphous surfaces, 2D photographs and 2D measured surveys are inadequate to illustrate the condition of the building for condition reports or relationships between components and materials for structural surveys and conservation decisions, especially in archeological remains. However, image-based documentation techniques can be used as simple tools for different types of surveys due to their ease of use and fast and economical properties. Therefore, the aim of the study is to test multi-image photogrammetric documentation techniques to improve and standardize visual data appending condition reports and further detailed reports regarding conservation of irregular ancient monuments.In the literature, there are many studies about image-based documentation techniques. However, the innovation of the study is to provide an improvement of the pipeline of condition and structural surveys of irregular ancient monuments by making use of photogrammetric techniques.In order to measure the effects of the relationship between the type of documentation technique and survey level on the photogrammetric documentation process of an ancient monument, a series of experiments were designed and the results compared. For this purpose, automated image orientation packages Autodesk 123D and Photosynth and manual image orientation package Tgi3D were evaluated in terms of process time, reliability and level of detail to identify appropriate techniques for different survey levels.This study proved that documentation of the structural characteristics of ancient monuments can be achieved successfully with the Tgi3D package, which has manual workflows. The documentation results might support structural intervention decisions. The 3D models based on automatic workflows might support a preliminary condition survey, since their production takes a relatively short time and scaled models are acceptable for identifying mass characteristics.Article Citation - WoS: 74Citation - Scopus: 85A Transdisciplinary Approach on the Energy Efficient Retrofitting of a Historic Building in the Aegean Region of Turkey(Elsevier Ltd., 2015) Şahin, Cem Doğan; Durmuş Arsan, Zeynep; Tunçoku, Selim Sarp; Broström, Tor; Gökçen Akkurt, GüldenAbstract Buildings account for 40% of total energy consumption in the European Union, yet at the same time they have considerable energy saving potentials. Historic buildings should be treated different from contemporary ones when it comes to energy improvements. The specifications which underline historical, sociocultural and architectural values require certain care during realization of energy saving implementations to sustain these values. The purpose of this study is to demonstrate how the energy efficient retrofitting in historic buildings should be managed in a transdisciplinary approach with a case study conducted on the historic building in ̄zmir - Turkey. A detailed building energy simulation tool was used to determine the impacts of energy efficient retrofits. The actual energy consumption of case building was based on the utility bills regarding electricity and heating fuel consumption. Building energy simulation tool was calibrated by comparing the measured and simulated indoor air temperatures and total energy consumptions. The inappropriate retrofits, which contradict to the cultural heritage values, were eliminated with a transdisciplinary approach. Later appropriate retrofits were gathered into three packages to evaluate their effects on the energy consumption. The results show that energy saving of more than 34% can be obtained without damaging the heritage values.Article Citation - WoS: 18Citation - Scopus: 21Evaluation of Heat Treated Clay for Potential Use in Intervention Mortars(Elsevier Ltd., 2010) Budak, Meral; Akkurt, Sedat; Böke, HasanIn this study, raw material compositions, basic physical, mineralogical, microstructural and hydraulic properties of lime mortars used in two selected historic buildings were determined by XRD, SEM-EDS and TGA analyses. The results showed that the mortars were hydraulic due to the use of pozzolanic aggregates. Taking into account the hydraulic characteristics of mortars due to the use of pozzolanic aggregates, the possibility of obtaining hydraulic mortars by using pozzolanic aggregates produced from heated commercial clays was investigated. For this purpose, four clay samples used in the ceramic industry in Turkey were heated at varying temperatures of 400, 450, 500, 550, 600, 800, and 1200°C with a heating rate of 10°C/min. Pozzolanic properties of heated clay samples were determined. The results showed that commercial clays studied are well suited for use as pozzolanic aggregates when they are heated between 500 and 700. °C. This is also confirmed by testing the compressive strengths of the three month aged laboratory-produced mortars that contained thermally treated clay (at 600°C) as pozzolanic aggregates. Compressive strength of this mortar was around 5. MPa which is satisfactorily high. © 2009 Elsevier B.V.Article Citation - WoS: 41Citation - Scopus: 42Characterization of Materials Used in the Execution of Historic Oil Paintings by Xrd, Sem-Eds, Tga and Libs Analysis(Elsevier Ltd., 2009) Şerifaki, Kerem; Böke, Hasan; Yalçın, Şerife; İpekoğlu, BaşakIn this study, material characteristics of historic oil paintings in a 19th century church in Ayvali{dotless}k/Turkey were investigated to propose the treatments to be used in their conservation and protection. For this purpose, physical, chemical and mineralogical compositions and the microstructure of the paintings were determined by X-ray Diffraction, Scanning Electron Microscope, Thermo Gravimetric Analyzer, Differential Scanning Calorimeter, Infrared Spectroscopy and Laser Induced Breakdown Spectroscopy. Analysis results showed that the paintings were composed of very thin binding and white priming layers on which the pigments were applied. Binding layers were composed of polymerized vegetable oil with Zinc Oxide. Priming layers were composed of anglesite mineral in polymerized vegetable oil. Pigments used in paintings were mainly green earth, red chrome and iron oxide.Article Citation - WoS: 50Citation - Scopus: 51The Use of Brick-Lime Plasters and Their Relevance To Climatic Conditions of Historic Bath Buildings(Elsevier Ltd., 2009) Uğurlu Sağın, Elif; Böke, HasanBrick-lime mortars and plasters have been widely used as water-proof materials in aqueducts, bridges and cisterns since early Hellenistic time. In this study, the characteristics of brick-lime plasters used in some Ottoman bath buildings were investigated in order to understand their relevance as plasters in hot and humid environmental conditions of the baths. For this purpose, basic physical properties, raw material compositions, mineralogical, microstructural and hydraulic properties of brick-lime plasters of some historic bath buildings in İzmir (Turkey) were determined by XRD, SEM-EDX, AFM and chemical analyses. The results indicated that their survival without loosing their strength and adhesion in hot and humid conditions of the baths was explained by their hydraulic characters due to the consciously use of porous and pozzolanic crushed bricks as aggregate in the manufacturing of plasters.