Conservation and Restoration of Cultural Heritage / Kültür Varlıklarını Koruma ve Onarım
Permanent URI for this collectionhttps://hdl.handle.net/11147/23
Browse
6 results
Search Results
Article Characterization of Yellow Patina on Stone Surfaces by Instrumental Analysis Including Libs(Taylor & Francis, 2022) Badur, Fulya; Aras, Nadir; Yalçın, Şerife; Böke, HasanYellow patina formed on the stone surfaces of historical buildings, monuments, and archaeological structures due to weathering is considered a value of the building in the conservation of cultural heritage studies. Although yellow patina layers can be easily distinguished on white marble surfaces, it is not possible to distinguish them on the yellow travertine surfaces with the naked eye. It should be taken into account in yellow travertines as well as marble surfaces before conservation treatments of the stone. In this study, mineralogical and chemical compositions and the thicknesses of yellow patina layers formed on yellow travertine and marble surfaces in Aizanoi, Aphrodisias, and Hierapolis archaeological sites in Turkey were analyzed in order to constitute a conservation approach in the archaeological sites. In this respect, XRD, FT-IR, SEM-EDX, and LIBS were used in the determination of compositions and thicknesses of yellow patina. Although LIBS analysis is a more convenient method to investigate patina layers on stone surfaces, this technique is not as well known as the others. Yellow patina layers contained calcium oxalate in the form of whewellite (CaC2O4.H2O). Their thicknesses were between 15 and 100 μm and should be protective against weathering on travertine and marble surfaces. Highlights LIBS analysis seems to be the most convenient micro-destructive method to estimate the thickness of the yellow patina layers on the marble and yellow travertine surfaces. The determination of the thickness of the yellow patina is critical to keep irreversible cleaning interventions, especially for the yellow travertines due to their similar colors. Yellow patina is mainly composed of calcium oxalate with clay minerals and organic compounds.Article Citation - WoS: 3Citation - Scopus: 3Microstructural Characteristics of Mortars Prepared by Hot Lime Mix(Union of Croatian Civil Engineers and Technicians, 2020) Şerifaki, Kerem; Uğurlu Sağın, Elif; Böke, HasanThe effect of lime characteristics and hot lime mix method on hydraulic, microstructural and mechanical properties of mortars is determined by producing mortars from quicklimes of two different marbles and two limestones. Results of SEM-EDS, XRD and TGA analyses reveal that the porous microstructure of mortars and spongy texture of calcite crystals are the indicators of the hot lime mix method. This study shows that characteristics of limestones used for the production of limes, as well as the preparation method, directly affect hydraulic, mechanical and microstructural properties of mortars.Article Citation - WoS: 29Citation - Scopus: 35Sustainable Bio-Nano Composite Coatings for the Protection of Marble Surfaces(Elsevier Masson SAS, 2015) Ocak, Y.; Sofuoglu, A.; Tihminlioglu, F.; Böke, H.Water repellency on natural stone surfaces is the most important issue in the protection of stone monuments from effects of atmospheric pollutants. In this study, effectiveness of a bio-nano composite coating, composed of a biodegradable polymer (poly-L-lactide [PLA]) and montmorillonite clay (MMT) was investigated for the protection of marble surfaces from pollution. The clay dispersion in polymer matrices was analyzed by using Scanning Tunnel Electron Microscopy (STEM) and X-Ray Diffraction (XRD), while protection performance was investigated by the measurement of surface roughness, wettability, water vapor permeability, capillary water absorption, and color changes on the marble surfaces. As a result, no alteration on the color of coated marbles was observed, significant improvement was obtained for hydrophobicity of the surface and inhibition of sulfation reaction on the exposed marble surfaces under acidic atmosphere. It could be said that PLA based nanocomposites seem to be promising materials as protective coating agents in reducing the effects of water and atmospheric pollutants on marble surfaces. © 2014 Elsevier Masson SAS.Article Citation - WoS: 44Citation - Scopus: 54Protection of Marble Surfaces by Using Biodegradable Polymers as Coating Agent(Elsevier, 2009) Ocak, Yılmaz; Sofuoğlu, Aysun; Tıhmınlıoğlu, Funda; Böke, HasanBiodegradable polymers have been replaced over the synthetic polymers in many applications due to their good properties such as reversibility and biodegradability. Therefore they allow new treatment on the surface of the material to be protected and they fulfil the principles generally accepted by the International Conservation Community of Historic Monuments and Buildings. In this study, the efficiency of four different biodegradable polymers as protective coatings on marble-SO2 reaction was investigated. The polymers used were zein, chitosan, polyhydroxybutyrate (PHB), and poly-l-lactide (PLA). The mineralogical composition, bulk density and porosity of uncoated marble were determined. The water vapor permeability, water absorption by capillary forces, surface wettability, and color alteration of uncoated and coated marbles were measured. For sulphation reaction, marble slabs were coated with these polymers and then they were exposed at nearly 8 ppm SO2 concentration at 100% relative humidity conditions together with uncoated ones in a reaction chamber for several days for testing their protection efficiency. The extent of reaction was determined by leaching of gypsum formed on the marble surfaces in deionized water and then determining the sulphate content by ion chromatography. The protection efficiency of polymer treatments was expressed as comparing the gypsum crust thickness of the coated and uncoated marble plates. The comparison among the polymers showed that the surface hydrophobicity, water capillary absorption and structure of polymer would be important factors affecting the protection efficiency. The use of high molecular weight PLA (HMWPLA) polymer on marble surfaces provided significant protection up to 60% which was indicated that HMWPLA polymer seems to be promising polymer as protective coating agent in reducing gypsum formation on marble surfaces in the polluted environment.Article Citation - WoS: 8Citation - Scopus: 8Reducing Marble-So2 Reaction Rate by the Application of Certain Surfactants(Springer Verlag, 2003) Böke, Hasan; Gauri, K. LalSulfur dioxide (SO2), prevalent in the modern urban environment of industrial countries, attacks calcite (CaCO3) in marble. As a result, a gypsum (CaSO4.2H2O) crust is produced at rain-sheltered surfaces while areas exposed to rain experience accelerated erosion. We have investigated the effect of certain surfactants as protective agents against SO2 attack. We report that the anions oxalate (C2O4-2) and oleate (C17H33COO-) from solutions of their highly soluble alkali salt species are able to replace carbonate (CO3-2) in calcite producing less reactive substrate of oxalate and oleate of calcium. Experiments to measure the protection obtained by these treatments were carried out in the laboratory and field conditions at nearly 1 ppm and 10 ppb SO2 concentrations, respectively. We found that these treatments provided significant protection to marble exposed in sheltered areas, up to 30% reduction of reaction rate by treatment with 2 × 10-4 M sodium oleate and up to 14% by a 2 × 10-3 M with potassium oxalate solutions, but become ineffective over long term exposure when applied to surfaces exposed to rain. Carrara marble was used in the reported study. Ion chromatography was the analytical tool, which allowed precise measurements of ionic concentrations of these salts, the amount of their uptake by marble, and the thickness of the gypsum crust. X-ray diffraction allowed determination of the new minerals formed at the marble surface by the treatment with surfactants.Article Citation - WoS: 22Citation - Scopus: 23Effect of Some Surfactants on So2-Marble Reaction(Elsevier Ltd., 2002) Böke, Hasan; Göktürk, E. Hale; Caner Saltık, Emine N.In the polluted atmosphere, sulphur dioxide (SO2) reacts with calcite (CaCO3) in marble producing calcium sulphite hemihydrate (CaSO3·0.5 H2O) and gypsum (CaSO4·2H2O). Gypsum develops crust at rain-sheltered surfaces and then, being more soluble, accelerates erosion at areas exposed to rain. Eventually, all these lead to significant deformations in the appearance and structure of marble surfaces. Clearly, some precautions must be taken to stop or at least to slow down this deterioration process which destroys our cultural heritage. In this study, we have investigated the possibilities of preventing the SO2-marble reaction by using water-soluble surfactants: Abil Quat 3270 and Tween 20. Experiments for measuring their effects have been carried out at conditions simulating the dry deposition of SO2. Infrared spectrometry and scanning electron microscopy were used to analyze the mineralogical composition and morphology of the reaction products. The extent of sulphation reaction was calculated by determining calcium sulphite hemihydrate and gypsum quantitatively by an IR approach and also by weight increases observed during the progress of SO2-marble reaction. A 10% decrease is observed in the total sulphation with both surfactant applications. The results have been discussed in relation to the possible stages of sulphation reaction and surface reactions of calcite.