IZTECH Research Centers Collection / İYTE Araştırma Merkezleri Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/11147/2636
Browse
10 results
Search Results
Article Citation - WoS: 11Citation - Scopus: 11Cfd Characteristics of Refrigerated Trailers and Improvement of Airflow for Preserving Perishable Foods(MDPI, 2019) Yildiz,T.When preserving perishable goods, maintaining a constant temperature over the cold supply chain is essential. Therefore, refrigerated vehicles are an important part of the cold supply chain system. However, many traditional refrigerated cargo systems are not designed to support the homogeneity of the temperature inside cargo trailers. Indeed, refrigerating equipment is usually placed on one side of transportation systems as this is considered to be more practical. Such a configuration thus leads to significant temperature differences in the two distinct parts of a refrigerated cargo trailer, which might affect the quality, safety, and shelf life of perishable foods. This research aims to improve the temperature distribution of refrigerated trailers. In this study, it is highlighted that in the most commonly used traditional refrigerated trailer models, lower air velocity and higher product temperature are observed at the rear. There is also a partial product chilling risk at the front of the refrigerated trailer. This study investigates and reports significant differences among the three airflow design models of refrigerated cargo systems by applying turbulence flow, heat, and mass transfer models. The analyses of these three models reveal that significant improvement could be achieved by applying the proper arrangements of inlets on the ceiling of the trailer body. © 2019 by the author.Article Citation - WoS: 11Citation - Scopus: 17Design and Analysis of a Lightweight Composite Shipping Container Made of Carbon Fiber Laminates(MDPI, 2019) Yildiz,T.The literature indicates that a 20% reduction in the weight of empty 40-foot shipping containers would result in $28 billion of fuel savings, along with a 3.6 exajoule reduction in the energy demand over containers’ 15-year lifetime. Decreasing the energy demand and thereby greenhouse gas emissions by utilizing lightweight shipping containers has been an unexplored strategy. In this regard, this study investigates the possibility of further reducing the weight of an empty container without compromising the structural integrity, strength, and function of a traditional steel container. This research finds that up to an 80% reduction in weight is possible by producing shipping containers with composite materials. This research presents the new design of a 40-foot container made of carbon fiber laminates. The tare weight of a traditional 40-foot shipping container is around 3750 kg. On the contrary, in this research, the weight of a composite design of the same container is calculated to be around 822 kg. Additional tests with various loads, such as lifting the container and stacking loads onto the composite container, are performed to explore the strength and buckling issues of the design presented in this study. The analyses reveal that the composite shipping container is a highly promising candidate for reducing greenhouse gas emissions, providing fuel savings and thus reducing the operational costs of transportation. © 2019 by the author.Article Citation - WoS: 55Citation - Scopus: 67Desalination: From Ancient To Present and Future(MDPI, 2021) Angelakis, Andreas N.; Valipour, Mohammad; Choo, Kwang-Ho; Ahmed, Abdelkader T.; Baba, Alper; Kumar, Rohitashw; Toor, Gurpal S.Water is life, and without water, there would be no civilizations and a vacant Earth. Water is considered an abundant natural resource on the earth. Water covers 3/4 of the surface. However, 97% of the available water on the earth is salty oceanic water, and only a tiny fraction (3%) is freshwater. This small portion of the available water supplies the needs of humans and animals. However, freshwater exists in underground, rivers, and lakes and is insufficient to cover all the world's water demands. Thus, water saving, water reuse, rainwater harvesting, stormwater utilization, and desalination are critical for maintaining water supplies for the future of humanity. Desalination has a long history spanning centuries from ancient times to the present. In the last two decades, desalination has been rapidly expanding to meet water needs in stressed water regions of the world. Yet, there are still some problems with its implementation in several areas of the world. This review provides a comprehensive assessment of the history of desalination for wiser and smarter water extraction and uses to sustain and support the water needs of the earth's inhabitants.Article Citation - WoS: 8Citation - Scopus: 14An End-To Trainable Feature Selection-Forecasting Architecture Targeted at the Internet of Things(IEEE, 2021) Nakıp, Mert; Karakayalı, Kubilay; Güzeliş, Cüneyt; Rodoplu, VolkanWe develop a novel end-to-end trainable feature selection-forecasting (FSF) architecture for predictive networks targeted at the Internet of Things (IoT). In contrast with the existing filter-based, wrapper-based and embedded feature selection methods, our architecture enables the automatic selection of features dynamically based on feature importance score calculation and gamma-gated feature selection units that are trained jointly and end-to-end with the forecaster. We compare the performance of our FSF architecture on the problem of forecasting IoT device traffic against the following existing (feature selection, forecasting) technique pairs: Autocorrelation Function (ACF), Analysis of Variance (ANOVA), Recurrent Feature Elimination (RFE) and Ridge Regression methods for feature selection, and Linear Regression, Multi-Layer Perceptron (MLP), Long Short Term Memory (LSTM), 1 Dimensional Convolutional Neural Network (1D CNN), Autoregressive Integrated Moving Average (ARIMA), and Logistic Regression for forecasting. We show that our FSF architecture achieves either the best or close to the best performance among all of the competing techniques by virtue of its dynamic, automatic feature selection capability. In addition, we demonstrate that both the training time and the execution time of FSF are reasonable for IoT applications. This work represents a milestone for the development of predictive networks for IoT in smart cities of the near future.Article Citation - WoS: 1Citation - Scopus: 1Groundwater Recharge Estiaton in the Alaşehir Sub-Basin Using Hydro-Geochemical Data; Alaşehir Case Study(Springer, 2021) Tonkul, Serhat; Baba, Alper; Şimşek, Celalettin; Demirkesen, Ali CanThe issue of groundwater recharge has gained importance in countries where there is not enough water supply to the aquifer. However, groundwater recharge is a difficult parameter to determine. This difficulty stems from factors such as the location of the area to be studied, time, cost, and hydrological data. Numerical, isotope, and chemical approaches are used in groundwater recharge investigations. Numerical and chemical approaches are more costly and time-consuming than chemical approaches. This study aims to ascertain alluvial aquifer recharge in Alaehir (Manisa) sub-basin using chemical approaches (Chloride Mass Balance Method) and its applicability. For this purpose, research wells were drilled at 25 different points in the alluvial aquifer, water sampling was done in wet and dry periods, and rainwater water samples were collected. Groundwater recharge was calculated by using chemical approaches from the chloride concentrations of the water samples collected. An annual average of 74.84 mm of recharge was found in the Alaehir sub-basin. This value corresponds to 16.38% of annual rainfall. At the same time, it was examined the groundwater and geothermal mixing mechanism to demonstrate the applicability of the Chloride Mass Balance Method. It was concluded that geothermal fluid in Alaehir sub-basin mixed with groundwater at a rate of 17%.Article Citation - WoS: 5Citation - Scopus: 7Effect of High Salinity and Temperature on Water-Volcanic Rock Interaction(Springer, 2021) Gören, Ayşegül Yağmur; Gören, Ayşegül Yağmur; Topçu, Gökhan; Demir, Mustafa Muammer; Demir, Mustafa M.; Baba, Alper; Baba, AlperIn order to understand the processes occurring in natural hydrothermal systems, it was carried out a series of water-volcanic rock interaction studies in the laboratory and an intermediate volcanic rock samples from geothermal production wells in Tuzla geothermal field (TGF) in western Turkey. A high-pressure autoclave was used to conduct water-rock interaction experiments under similar conditions of the field. Rainwater and seawater were treated with volcanic rocks at 140 degrees C (reservoir temperature) and 4.5 bar pressure. The change in the ionic content of the resulting fluids was examined in terms of the type of volcanic rocks and mineral saturation index. The results indicate that talc and diopside minerals in geothermal systems may cause scaling at high temperatures depending on the geothermal fluid and pH.Article Citation - WoS: 3Citation - Scopus: 4Evaluation of Multifunctional Hybrid Analogs for Stilbenes, Chalcones and Flavanones(Bentham Science Publishers, 2017) Çağır, Ali; Odacı, Burcu; Varol, Mehmet; Akçok, İsmail; Okur, Özgür; Koparal, Ayşe T.Aims: In this study, discovery of novel anticancer agents acting by more than one mechanism was aimed. Method: For this purpose, eleven previously synthesized simple-stilbene, chalcone, flavanone derivatives and 31 novel stilbene-fused chalcones and stilbene-fused flavanones were tested for their aromatase inhibition, anti-angiogenic and anti-proliferative properties in cancer (PC3, MCF-7) and healthy (HUVEC) cell lines. MTT cell viability assay was used to evaluate the anti-proliferative activities of the compounds. CYP19/MFC high-throughput screening kit (BD Biosciences, Oxford, UK) was used to search the aromatase inhibition properties and matrigel tube formation assay was applied to determine the anti-angiogenic activities. Results: Results indicate that the simple-chalcone and flavanone derivatives were more cytotoxic than the simple-stilbenes in the both cancer cell lines. In contrast, the simple-stilbene structures were much more effective at aromatase inhibition. The cytotoxicity profiles of stilbene-fused chalcones in cancer cells imply that these molecules mostly mimic the simple chalcone structures. On the other hand, flavanones lose their cytotoxic activities after becoming fused with stilbenes. Additionally, aromatase inhibition assays showed that stilbene-fused chalcones again do mimic the simple-chalcones but not simple-stilbenes and anti-angiogenic profiles of the tested molecules seem to be not related with stilbene fragments. Furthermore, stilbene-fused flavanones may mimic both simple-flavanones and simple-stilbenes depending upon the type and position of the substituent in their respective terminal aromatic rings.Article Citation - WoS: 1Citation - Scopus: 2Induction of Triploidy in Melicertus Kerathurus (forskal, 1775) With Temperature Shock(John Wiley and Sons Inc., 2016) Kır, Mehmet; Şahan, Ali Kemal; Okur, ÖzgürTriploidy in fertilized eggs of Melicertus kerathurus was induced by cold (8, 10, 12°C) and heat (34, 36, 38°C) shock for different duration times (2, 4 and 8 min) after 10 min of post spawning. The best individual treatment produced 64.5% triploid nauplii in cold shock application at a temperature of 10°C for a duration of 8 min. Temperature did not have significant effect (P > 0.05) on triploid rate but duration time had a significant effect (P < 0.05) for individual cold or heat shock. This study demonstrates that because of a wide variety of effective parameters, it is essential to optimize shock conditions for each species strain at each location. © 2016 John Wiley & Sons Ltd.Article Citation - WoS: 71Citation - Scopus: 77A Comparative Study on Exergetic Performance Assessment for Drying of Broccoli Florets in Three Different Drying Systems(Taylor and Francis Ltd., 2010) İçier, Filiz; Çolak, Neslihan; Erbay, Zafer; Hancıoğlu Kuzgunkaya, Ebru; Hepbaşlı, ArifThis article deals with the exergy analysis and evaluation of broccoli in three different drying systems. The effects of drying air temperature on the exergy destruction, exergy efficiency, and exergetic improvement potential of the drying process were investigated. The exergy destruction rate for the drying chamber increased with the rise in the drying air temperature at 1.5 m/s, both in the tray and the heat pump dryer. The highest exergy efficiency value was obtained as 90.86% in the fluid bed dryer in comparison to the other two drying systems and the improvement potential rate was the highest in the heat pump dryer during drying of broccoli at the drying air temperature of 45°C and the drying air velocity of 1.0 m/s. © 2010 Taylor & Francis Group, LLC.Article Citation - WoS: 50Citation - Scopus: 50Exergoeconomic analysis of plum drying in a heat pump conveyor dryer(Taylor and Francis Ltd., 2010) Hepbaşlı, Arif; Çolak, Neslihan; Hancıoğlu, Ebru; İçier, Filiz; Erbay, ZaferIn this study, plum slices were dried in a heat pump dryer designed and constructed in Ege University, Izmir, Turkey. Drying experiments were carried out at an air temperature range of 45-55°C. The performance of the dryer along with its main components were evaluated using an exergy analysis method. Exergy destruction and capital cost rates were used for the exergoeconomic analysis, which is based on the quantities exergy, cost, energy, and mass (EXCEM) method. Exergy destruction rates to capital cost values Rex were obtained to vary between 1.668 and 2.063 W/ USD at different drying air temperatures. Ren values were observed to range from 6.258 to 5.749 W/USD. Ren values decreased as the drying air temperature increased, contrary to Rex values. Ṙex and Ṙen values increased linearly with increasing temperature due to the loss, whereas Ṙen decreased due to the relatively higher energy utilization efficiency of the heat pump. In the compressor, Ṙen and Ṙex values decreased with the increase in the temperature contrary to the other components. Ṙex had the lowest value in the drying duct. However, in the compressor, expansion valve, and heat recovery, Ṙex values were found to be higher and should be improved in these units. © 2010 Taylor & Francis Group, LLC.