IZTECH Research Centers Collection / İYTE Araştırma Merkezleri Koleksiyonu

Permanent URI for this collectionhttps://hdl.handle.net/11147/2636

Browse

Search Results

Now showing 1 - 6 of 6
  • Book Part
    Citation - Scopus: 3
    High Radiogenic Granites of Western Anatolia for Egs: a Review
    (CRC Press, 2023) Chandrasekharam, Dornadula; Baba, Alper; Ayzit, Tolga
    Turkey has made remarkable progress in the hydrothermal sector by promoting both electricity generation and direct application. In terms of power generation, this country is the fourth top country in the world. Nearly 1 billion kWh of energy is being utilized to keep 150,000 homes warm in the winter. In addition, Turkey has huge amounts of uptapped energy in its high radiogenic granites in western Anatolia, spread over a cumulative area of 6,910 km2. The radioactive heat generated by these granites varies from 5 to 13 µW/m3. These granite plutons are located over a region with high heat flow values (120 mW/m2) and the Curie temperature isotherm in this region is located at a depth varying from 6 to 12 km. The heat flow values here are 50% higher than the world average. This thermal regime concurs well with the wet granite melting curve at a heat flow of 85 mW/m2. The entire thermal regime indicates a visco-elastic lower crustal layer in this region. Thus, these granites provide excellent sites for initiating Enhanced Geothermal Systems projects in Turkey. Earlier EGS projects in France and Australia gave power estimates of 79×106 kWh of electricity from 1km3 of such granite. With ongoing development in drilling technology, the classical concept of creating a fracture network is being replaced with loop technology that reduces minor seismic risks and also the cost of power. The most important additional advantage Turkey has is the high-temperature regime at shallow depth, unlike other countries where the granites are located at depths >5km. These factors cause the cost of power to fall below 6 euro cents per kWh. Besides the power and heat, the greatest advantage is the reduction in emissions and achieving UN sustainable development goals. A conservative estimate shows that these radiogenic granites of western Anatolia are capable of generating a minimum of 546×109 kWh of power. Energy from these granites can be utilized to generate freshwater using the desalination method. Earlier studies indicate that to produce 1 m3 of desalinated water, ~16 kWh of electrical energy are needed. The cost of fresh water generated using geothermal energy sources will be <1.5 euros per 1m3. Turkey can utilize the energy from granite for water and food security in the future. © 2024 selection and editorial matter, Dornadula Chandrasekharam and Alper Baba.
  • Conference Object
    Citation - Scopus: 1
    Enterprise Systems Applications Development Plans To Build and Develop Robust and Environmentally Sensitive Green Logistics Systems Management Software
    (Springer Verlag, 2009) Yıldız, Türkay; Yercan, Funda
    Within the concept of enterprise-wide development of environmentally sensitive systems' application modules to fully integrate all-in-one green logistics services principles have received much attention and consideration from practitioners, academia, and from the industry, for about more than a decade. However, by taking into the consideration of the multidisciplinary nature of the issue, large scale effective collaborative framework is needed to be developed. Therefore, utilization of UML diagrams, class definitions, defining class relationships, fields, tables, views, etc. so on play crucial roles in the design phases of the enterprise system. Thus, this article largely deals with the major logistics work processes and their interactions within the consideration of environmental engineering issues on business operations to address step-by-step process control mechanisms to provide necessary input to build robust-design and better implementation of the needed IT software backbone.
  • Article
    Citation - Scopus: 9
    An Empirical Analysis on Logistics Performance and the Global Competitiveness
    (Vilnius Gedminas Technical University, 2017) Yıldız, Türkay
    Logistics has been identified as an area to build cost and service advantages. Therefore, companies are more focused on customer needs and trying to find ways to reduce costs, improve quality and meet the growing expectations of their clients. Indeed, the global competition has led managers to begin to address the issue of providing more efficient logistics services. In this regard, this paper presents an empirical study on logistics performance and global competitiveness. This paper also identifies the associations between logistics performances and global competitiveness. The results indicate that some variables in global competitiveness scores contribute much higher to the logistics performances than the other variables through analysis. The variables that contribute much higher than the other variables to the logistics performances are shown.
  • Article
    Citation - Scopus: 2
    The European Union and Turkey: a Review of Their Commonalities and Disparities Using Cluster Analysis
    (Vilnius Gediminas Technical University, 2014) Yıldız, Türkay
    Turkey has enjoyed considerable economic growth over the past decade and has a positive economic outlook and strong growth prospects. The country benefits from being located between Europe and the major energy producers in the Middle East in the so-called strategic energy corridor. The issue of Turkey's accession to the EU has long been on the political agenda in Europe. Indeed, Turkey has made considerable efforts to become a full EU member state. However, the accession negotiations for EU membership continue, while Turkey has recently refused to open new accession chapters with the EU and instead has turned its attention to other regional developments. Turkey has strengthened its swtrategic ties with a wide range of countries including those in Europe and the Middle East. It also plays an influential role in a geography that stretches across the former Soviet Union nations. In this paper, the path of Turkey's accession issues is reviewed and the direction of its economy based on the measure of GDP per capita is forecast using an autoregressive integrated moving average model. In addition, the cluster analysis technique is adopted in order to measure the possible standing of Turkey among EU members, the similarities between EU members, and the current path to becoming an EU member state.
  • Article
    Citation - Scopus: 19
    Application of Geothermal Energy and Its Environmental Problems in Turkey
    (Inderscience Enterprises Ltd., 2015) Baba, Alper
    Human beings have been benefiting from geothermal energy for different uses since the dawn of the civilisation in many parts of the world. One of the earliest uses of geothermal energy was for heating and it was used extensively by Romans in Turkey. The Aegean region is favoured by a large number of thermal springs known since ancient times. However, it was first in the 20th century that geothermal energy was used on a large scale for direct use and electricity generation. The country's installed heat capacity is 2,705 MWt for direct use and 322.39 MWe for power production. In parallel to developing geothermal energy applications in Turkey, many sites are now experiencing problems such as water contamination associated with geothermal fluid. Especially, the high temperature solution of elements and compounds, causes operational limitations in geothermal power plants. These limitations are due to the severe scaling and corrosion of geothermal fluid. Copyright © 2015 Inderscience Enterprises Ltd.
  • Article
    Citation - WoS: 3
    Citation - Scopus: 4
    Exergy analysis of food drying processes
    (Springer Verlag, 2010) Çolak, Neslihan; Balta, Mustafa T.; İçier, Filiz; Hancıoğlu, Ebru; Hepbaşlı, Arif; Erbay, Zafer
    It is well known that micro-level system parameters may have some great impact on macro-level energy aspects, the environment, and sustainability. Of course, if one wants to approach these thermodynamically, there are two ways: energy analysis through the first law of thermodynamics and exergy analysis through the second law of thermodynamics. Exergy analysis is an essential tool to expose the impacts of a power generating device on exergy-based sustainability; sustainability is necessary to overcome current ecological, economic, and developmental problems (Dincer and Rosen, 2005). In this regard, some new exergy-based sustainability parameters for a PEM fuel cell have been developed and studied parametrically to investigate how they will help measure the level of environmental impact and sustainable development (Midilli and Dincer, 2009). These types of parameters may also be applied to other energy-related systems.