Mechanical Engineering / Makina Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4129
Browse
7 results
Search Results
Article Citation - WoS: 7Citation - Scopus: 8Size and Roughness Dependent Temperature Effects on Surface Charge of Silica Nanoparticles(Elsevier, 2021) Alan, Büşra Öykü; Barışık, MuratSilica nanoparticles (SNP) with different sizes and surface areas are used in numerous micro/nanofluidic applications, while their surface charge properties play a major role in their function. In many of these applications, SNPs also undergo temperature variation. We present that an increase in temperature yields a substantial increase in SNP surface charge depending on nanoparticle size and surface roughness, which cannot be estimated by existing theory. As a continuation of our earlier work characterizing the deviation of SNP surface charging from theoretical predictions due to curvature and EDL overlap effects, this study presents the differentiation from the theory in temperature dependence under various conditions. As we calculate surface chemistry as a function of local ionic conditions (Charge Regulation), temperature variation changed the equilibrium constants of protonation/deprotonation reactions of the SNP surface, in addition to changes occurring in relative permittivity and ionic mobilities. Results show that variation of SNP surface charge by temperature decreases by decreasing particle size and/or increasing roughness size, compare to theoretical flat plate calculations considering similar temperature-dependent properties and charge regulation on the surface. We characterized these deviations by obtaining an electrokinetic similarity between different systems of various size and roughness at various ionic conditions based on the non-dimensional groups of lambda/DP and lambda/DR. Based on these, we devised a phenomenological model as an extension to the flat plate theory to successfully predict the surface charge of SNPs as a function of the particle size, roughness size, and temperature. The current findings are important for the characterization of SNPs through temperature variations and can also be used to adjust the surface charge of SNPs by tuning the temperature.Article Citation - WoS: 9Citation - Scopus: 13Local Heat Transfer Control Using Liquid Dielectrophoresis at Graphene/Water Interfaces(Elsevier Ltd., 2021) Yenigün, Onur; Barışık, MuratGraphene-based materials are considered for the solution of the thermal management problem of current and next generation micro/nano-electronics with high heat generation densities. However, the hydrophobic nature of few-layer graphene makes passing heat to a fluid very challenging. We introduced an active and local manipulation of heat transfer between graphene and water using an applied, non-uniform electric field. When water undergoes electric field induced orientation polarization and liquid dielectrophoresis, a substantial increase in heat transfer develops due to a decrease in interfacial thermal resistance and increase in thermal conductivity. By using two locally embedded pin and plate electrodes of different sizes, we demonstrated a two-dimensional heat transfer control between two parallel few-layer graphene slabs. We obtained local heat transfer increase up to nine times at pin electrode region with an ultra-low Kapitza resistance through the studied non-uniform electric field strength range creating highly-ordered compressed water in the experimentally measured density limits. With this technique, heat can be (i) distributed from a smaller location to a larger section and/or (ii) collected to a smaller section from a larger region. Current results are important for hot spot cooling and/or heat focusing applications. © 2020Article Citation - WoS: 26Citation - Scopus: 27Electric Charge of Nanopatterned Silica Surfaces(Royal Society of Chemistry, 2019) Özçelik, H. Gökberk; Barışık, MuratThe most recent technologies employ nanoscale surface patterning or roughening in order to engineer desired properties on a surface. Electrokinetic properties at the interface of such surfaces and ionic liquids show different behavior to the well-known theoretical descriptions. Basically, the ionic distribution on the surface differs due to electrical double layer overlap effects in the pits and curvature effects at the tips of surface structures. Generally, the charge density of a surface is assumed to be a material property and surface roughness effects are overlooked in most of the literature. In contrast, we properly calculated the local surface charges based on surface chemistry at the corresponding local ionic concentration (charge regulation) for various surface roughness and solution conditions. The results showed that the surface charge density of silica decreased at the pits but increased at the tips of surface patterns. Even for the simplest case of self-repeating surface structures, the average of local surface charges becomes lower than the theoretical predictions. Based on numerical calculations, a phenomenological model was developed as an extension to the existing flat surface theory, which can successfully predict the average surface charge on a nano patterned surface as a function of the surface pattern size, ionic concentration and pH.Article Citation - WoS: 21Citation - Scopus: 24Effect of Nano-Film Thickness on Thermal Resistance at Water/Silicon Interface(Elsevier Ltd., 2019) Yenigün, Onur; Barışık, MuratParallel to the developments in micro/nano manufacturing techniques, component sizes in micro/nano electro mechanical systems have been decreasing to nanometer scales. Decrease in lengths in heat transfer direction below the heat carrier phonon length scales reduces thermal conduction in semiconductors. This study shows that such altered phonon spectrums with the decrease of size also reduce the heat transfer at the solid/liquid interfaces and can be correlated with the thermal conductivity of the slab. Using Molecular Dynamics (MD), we measured heat transfer between water and silicon of different thickness between 5 nm and 60 nm. Silicon slabs exhibit a linear temperature profile through the bulk where thermal conductivities measured based on Fourier law decreased by the decreasing slab thickness. We applied a semi-theoretical formulism on variation of conductivity by slab thickness. At the interface of these slabs and water, heat passage is disturbed due to the phonon mismatch of dissimilar materials, which is mostly considered as solid/liquid couple interface properties by the earlier literature. Resistance for phonon passage characterized as Kapitza length (L-K) is measured for different slab thicknesses at different surface wetting conditions varying between hydrophilic to hydrophobic. Increasing surface wetting decreases the L-K while at a certain wetting, decreasing the slab thickness increases the L-K. Once the L-K of different size slabs normalized by its bulk value (assumed to be the L-K of the thickest slab at the corresponding wetting), L-K variation by silicon thickness shows a universal behavior independent of surface wetting. A mathematical model describing the exponential increase of L-K by decreasing thickness was developed and validated by an earlier model. We further developed a correlation between the corresponding changes of L-K and conductivity with respective to their bulk values by analytically combining two models as (L-K/L-K-(Bulk)) = exp (3.94(k(Bulk) - k)/(k x k(Bulk))), using which L-K can be predicted from available thermal conductivities of a certain material. Results are crucial for thermal management of current and future electronics. (C) 2019 Elsevier Ltd. All rights reserved.Article Citation - WoS: 18Citation - Scopus: 17Wetting of Single Crystalline and Amorphous Silicon Surfaces: Effective Range of Intermolecular Forces for Wetting(Taylor and Francis Ltd., 2020) Özçelik, Hüseyin Gökberk; Özdemir, Abdullah Cihan; Kim, Bohung; Barışık, MuratWetting at nanoscale is a property of a three-dimensional region with a finite length into the solid domain from the surface. Understanding the extent of the solid region effective on wetting is important for recent coating applications as well as for both crystalline and amorphous solids of different atomic ordering. For such a case, we studied the wetting behaviour of silicon surfaces at various crystalline and amorphous states. Molecular distributions of amorphous systems were varied by changing the amorphisation conditions of silicon. Semi-cylindrical water droplets were formed on the surfaces to be large enough to remain independent of line tension and Tolman length effects. Contact angles showed up to 38% variation by the change in the atomic orientation of silicon. Instead of a homogeneous solid density definition, we calculated different solid densities for a given surface measured inside different extents from the interface. We correlated the observed wetting variation with each of these different solid densities to determine which extent governs the wetting variation. We observed that the variation of solid density measured inside a 0.13 nm extent from the surface reflected the variation of wetting angle better for both single crystalline and amorphous silicon surfaces.Article Citation - WoS: 23Citation - Scopus: 24An Extended Kozeny-Carman Model for Gas Permeability in Micro/Nano-porous Media(American Institute of Physics, 2019) Sabet, Safe; Barışık, Murat; Mobedi, Moghtada; Beşkök, AliGas transport in micropores/nanopores deviates from classical continuum calculations due to nonequilibrium in gas dynamics. In such a case, transport can be classified by the Knudsen number (Kn) as the ratio of gas mean free path and characteristic flow diameter. The well-known Klinkenberg correction and its successors estimate deviation from existing permeability values as a function of Kn through a vast number of modeling attempts. However, the nonequilibrium in a porous system cannot be simply modeled using the classical definition of the Kn number calculated from Darcy's definition of the pore size or hydraulic diameter. Instead, a proper flow dimension should consider pore connectivity in order to characterize the rarefaction level. This study performs a wide range of pore-level analysis of gas dynamics with different porosities, pore sizes, and pore throat sizes at different Kn values in the slip flow regime. First, intrinsic permeability values were calculated without any rarefaction effect and an extended Kozeny-Carman model was developed by formulating the Kozeny-Carman constant by porosity and pore to throat size ratio. Permeability increased by increasing the porosity and decreasing the pore to throat size ratio. Next, velocity slip was applied on pore surfaces to calculate apparent permeability values. Permeability increased by increasing Kn at different rates depending on the pore parameters. While the characterization by the Kn value calculated with pore height or hydraulic diameter did not display unified behavior, relating permeability values with the Kn number calculated from the equivalent height definition created a general characterization based on the porosity independent from the pore to throat size ratio. Next, we extended the Klinkenberg equation by calculating unknown Klinkenberg coefficients which were found as a simple first order function of porosity regardless of the corresponding pore connectivity. The extended model as a combination of Kozeny-Carman for intrinsic permeability and Klinkenberg for apparent permeability correction yielded successful results. Published under license by AIP Publishing.Conference Object Molecular Modeling of Force Driven Gas Flows in Nano-Channels(International Conference on Computational Fluid Dynamics (ICCFD), 2016) Barışık, MuratNano-scale gas transport plays an important role in many micro/nanotechnology applications where the rarefied gas dynamics based solutions are frequently used by maintaining a “dynamic similarity” between low pressure (rarefied) and nano gas flows. However, such a consideration is incomplete since the surface force field effects dominant in nano-levels induce significant variations. In order to specify the surface force effects on gas transport, we define a new parameter (B) as the ratio of force penetration length to the channel height, and studied the length scales and conditions for applicability of current rarefied gas dynamics on nano-scale gas flows. Using Molecular Dynamics, force driven gas flows were characterized as a function of B parameter and Knudsen number. Results showed that for a negligible value of B parameter (B?0) transport can be described by rarefied gas dynamics in the whole Knudsen range while the velocity profiles are parabolic and the variation of mass flow rate shows the well-known Knudsen minimum around Kn=1. As the flow dimension decreases, B becomes a finite value indicating the dominancy of surface force effects over rarefaction, and gas velocities and mass transport significantly deviates from the kinetic theory predictions. © 2016 9th International Conference on Computational Fluid Dynamics, ICCFD 2016 - Proceedings. All rights reserved.