Mechanical Engineering / Makina Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4129
Browse
2 results
Search Results
Article Citation - WoS: 15Citation - Scopus: 17Effects of Nanosecond Laser Ablation Parameters on Surface Modification of Carbon Fiber Reinforced Polymer Composites(SAGE Publications, 2023) Martin, Seçkin; İplikçi, Hande; Barışık, Murat; Türkdoğan, Ceren; Yeke, Melisa; Nuhoğlu, Kaan; Esenoğlu, Gözde; Tanoğlu, Metin; Aktaş, Engin; Dehneliler, Serkan; İriş, Mehmet ErdemRemoval of contaminants and top polymer layer from the surface of carbon-fiber-reinforced polymer (CFRP) composites is critical for high-quality adhesive-joining with direct bonding to the reinforcing fiber constituents. Surface treatment with a laser beam provides selective removal of the polymer matrix without damaging the fibers and increasing the wettability. However, inhomogeneous thermal properties of CFRP make control of laser ablation difficult as the laser energy absorbed by the carbon fibers is converted into heat and transmitted through the fiber structures during the laser operation. In this study, the effect of scanning speed and laser power on nanosecond laser surface treatment was characterized by scanning electron microscope images and wetting angle measurements. Low scanning speeds allowed laser energy to be conducted as thermal energy through the fibers, which resulted in less epoxy matrix removal and substantial thermal damage. Low laser power partially degraded the epoxy the surface while the high power damaged the carbon fibers. For the studied CFRP specimens consisting of unidirectional [45/0/?45/90]2s stacking of carbon/epoxy prepregs (HexPly®-M91), 100 mJ/mm2 generated by 10 m/s scanning speed and 30 W power appeared as optimum processing parameters for the complete removal of epoxy matrix from the top surface with mostly undamaged carbon fibers and super hydrophilic surface condition. © The Author(s) 2023.Article Interfacial Convective Heat Transfer for Randomly Generated Porous Media(Begell House, 2018) Uçar, Eren; Mobedi, Moghtada; Ahmadi, AzitaHeat and fluid flow in 20 random porous media is investigated by using the Monte Carlo (MC) procedure. Each porous medium consists of long square rods distributed randomly in flow direction. The continuity, momentum, and energy equations are solved for a row of porous media representing the entire domain of a random porous medium. The microstructure properties of each random porous medium which are the mean and standard deviations of the Voronoi areas, the nearest neighbor distance and orientation are obtained. The rods in the domain are classified into three groups as blocker, active, and passive rods according to their effects on the penetration of heat in porous media. 'The interfacial convective heat transfer coefficients for each rod and entire porous medium are calculated and plotted for different Reynolds numbers. A characteristic length based on the microstructure properties of the generated porous media is defined, and three correlations relating to the upper limit, lower limit, and mean of the overall interfacial convective heat transfer coefficient are proposed.