Mechanical Engineering / Makina Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4129
Browse
4 results
Search Results
Article Citation - WoS: 3Citation - Scopus: 4Environmental Assessment of Transparent Conductive Oxide-Free Efficient Flexible Organo-Lead Halide Perovskite Solar Cell(Taylor & Francis, 2020) Sarıaltın, Hüseyin; Geyer, Roland; Zafer, CeylanPerovskite solar cells (PSCs), one of the third-generation photovoltaic (PV) technologies, have recently become a very popular topic in photovoltaic research. This technology, which is a candidate for commercialization in the future, needs to be evaluated from an environmental point of view. The amount of electricity consumption is the most important factor that directly determines the environmental impact values of photovoltaic cell manufacturing. Transparent conductive oxide (TCO) coated glass is one of the major contributors to electricity consumption in PSC architecture. It is therefore useful to investigate the environmental profile of TCO coated glass-free PSC architecture with conventional PVs. One of the solutions to this issue is manufacturing PSC on a flexible substrate. Flexible PVs are considered to be one of the most promising candidates for mass production with its advantages of low-temperature manufacturing, higher efficiency with a lower weight, portability, and compatibility with a roll to roll fabrication. In this work, we show that the environmental impacts of a representative PSCs with a flexible substrate. While the energy payback time (EPBT) of the flexible PSC is already competitive with commercial PVs, the device must reach a 25-year cell lifetime for its global warming potential (GWP) to reach a reasonable range.Article Citation - WoS: 17Citation - Scopus: 18Electric Field Controlled Heat Transfer Through Silicon and Nano-Confined Water(Taylor & Francis, 2019) Yenigün, Onur; Barışık, MuratNanoscale heat transfer between two parallel silicon slabs filled with deionized water was studied under varying electric field in heat transfer direction. Two oppositely charged electrodes were embedded into the silicon walls to create a uniform electric field perpendicular to the surface, similar to electrowetting-on-dielectric technologies. Through the electrostatic interactions, (i) surface charge altered the silicon/water interface energy and (ii) electric field created orientation polarization of water by aligning dipoles to the direction of the electric field. We found that the first mechanism can manipulate the interface thermal resistance and the later can change the thermal conductivity of water. By increasing electric field, Kapitza length substantially decreased to 1/5 of its original value due to enhanced water layering, but also the water thermal conductivity lessened slightly since water dynamics were restricted; in this range of electric field, heat transfer was doubled. With a further increase of the electric field, electro-freezing (EF) developed as the aligned water dipoles formed a crystalline structure. During EF (0.53 V/nm), water thermal conductivity increased to 1.5 times of its thermodynamic value while Kapitza did not change; but once the EF is formed, both Kapitza and conductivity remained constant with increasing electric field. Overall, the heat transfer rate increased 2.25 times at 0.53 V/nm after which it remains constant with further increase of the electric field.Article Citation - WoS: 11Citation - Scopus: 11A Numerical Study on Determination of Volume Averaged Thermal Transport Properties of Metal Foam Structures Using X-Ray Microtomography Technique(Taylor & Francis, 2018) Çelik, Hasan; Mobedi, Moghtada; Nakayama, Akira; Özkol, ÜnverVolume averaged thermal transport properties of two metal foams with 10 and 20 PPI are obtained by using microtomography technique. The digital 3D structures of samples are generated in computer environment. The governing equations are solved for the entire domain and the volume averaged technique is used to determine interfacial heat transfer coefficient, longitudinal and transverse thermal dispersion conductivity. The study is performed for the pore scale Reynolds number from 100 to 600. The obtained results are within the ranges of the suggested correlations in literature. The present study supports the correlations suggested by Calmidi and Mahajan (2000) and Zhang et al. (2016).Article Citation - WoS: 35Citation - Scopus: 38Heat Transfer Enhancement in a Microchannel Heat Sink: Nanofluids And/Or Micro Pin Fins(Taylor & Francis, 2020) Coşkun, Turgay; Çetkin, ErdalHere, we show that overall thermal conductance in a rectangular microchannel heat sink can be maximized with the combination of nanofluids and micro pin fins. We uncover the effect of micro pin fins and nanofluids both separately and simultaneously in order to uncover their effect on the thermal conductance (i.e., thermal resistance). Both nanofluids and micro pin fins decrease the overall thermal resistance due to increase in the average thermal conductivity of the flow system. In addition, they increase the heat transfer surface area of the solid interacting with the fluid. However, the pumping power (pressure drop) increases in both methods due to the increase in the resistances to the fluid flow. The results document what should be the nanoparticle volume fraction mixed into the base fluid and the micro pin fin volume in order to minimize thermal resistance. If the thermal conductivity of the nanoparticles and micro pin fins are the same, the thermal conductance becomes the maximum with 4% and 0.14% volume fractions for the nanofluid and micro pin fins, respectively. This result shows that inserting micro pin fins and using nanofluids with a given volume fraction ratio maximize the overall thermal conductance. © 2019, © 2019 Taylor & Francis Group, LLC.