Mechanical Engineering / Makina Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4129
Browse
31 results
Filters
Settings
Search Results
Review Citation - WoS: 13Citation - Scopus: 13A Review on Battery Thermal Management Strategies in Lithium-Ion and Post-Lithium Batteries for Electric Vehicles(Yıldız Technical University, 2023) Güngör, Şahin; Göçmen, Sinan; Çetkin, ErdalElectrification on transportation and electricity generation via renewable sources play a vital role to diminish the effects of energy usage on the environment. Transition from the conven- tional fuels to renewables for transportation and electricity generation demands the storage of electricity in great capacities with desired power densities and relatively high C-rate values. Yet, thermal and electrical characteristics vary greatly depending on the chemistry and struc- ture of battery cells. At this point, lithium-ion (Li-ion) batteries are more suitable in most applications due to their superiorities such as long lifetime, high recyclability, and capacities. However, exothermic electrochemical reactions yield temperature to increase suddenly which affects the degradation in cells, ageing, and electrochemical reaction kinetics. Therefore, strict temperature control increases battery lifetime and eliminates undesired situations such as lay- er degradation and thermal runaway. In the literature, there are many distinct battery thermal management strategies to effectively control battery cell temperatures. These strategies vary based on the geometrical form, size, capacity, and chemistry of the battery cells. Here, we focus on proposed battery thermal management strategies and current applications in the electric vehicle (EV) industry. In this review, various battery thermal management strategies are doc- umented and compared in detail with respect to geometry, thermal uniformity, coolant type and heat transfer methodology for Li-ion and post-lithium batteries.Article Citation - WoS: 3Boşluk İletim Tabakasız ve Esnek Organo Kurşun İyodür Perovskit Güneş Hücresinin Çevresel Etki Değerlendirmesi(Gazi Üniversitesi, 2022) Sarıaltın, HüseyinPerovskit güneş pilleri (PSC) esneklik ve düşük maliyetli rulodan ruloya üretim gibi avantajlarla birlikte son zamanlarda güç dönüşüm verimliliğinde de önemli bir ilerleme kat etmiştir. PSC'lerin ticarileştirilmesinden önce çevresel performansının yaşam döngüsü değerlendirme (LCA) yöntemi ile araştırılması önemlidir. Bu çalışmada, literatür verilerinden istifade edilerek, esnek Polietilen tereftalat (PET) alt tabaka ve boşluk iletim katmanı (HTL) eliminasyonunu içeren çözelti bazlı organo-kurşun iyodür perovskit güneş hücresinin beşikten kapıya yaşam döngüsü analizi (LCA) gerçekleştirilmiştir. 1 m2 hücre alanı üretiminden kaynaklanan çevresel etkiler altı Uluslararası Referans Yaşam Döngüsü Veri Sistemi (ILCD) kategorisinde belirlenmiştir. Analizin sonucunda, en fazla etki değerinin yüksek elektrik enerjisi tüketimine sahip vakum biriktirme işlemi gereksinimine sahip olan alüminyum metal elektrot tabakasının imalatından kaynaklandığı bulunmuştur. Ticari fotovoltaik teknolojilerle karşılaştırma yapabilmek için en yaygın kullanılan çevresel göstergelerden birisi olan küresel ısınma potansiyeli (GWP), birim kWh elektrik üretimi için hesaplanmıştır. Buna göre, bu çalışmada incelenen HTL'siz esnek (HFF) PSC'nin ticari PV'lerle rekabetçi GWP değerine ulaşmak için 15-20 yıl cihaz ömrüne ihtiyacı olduğu bulunmuştur.Article Transdiscal Screw Fixation in L5-S1 Spondylolysis: a Biomechanical Study Transdiscal Screw Fixation in L5-51 Spondylolysis(Bayrakol Medical Publishing, 2021) Aydın, Murat; Bulut, Tuğrul; Güden, Mustafa; Erel, NuriAim: This study aimed to investigate whether the L5-S1 transdiscal screw fixation is biomechanically sufficient against axial loads and the resulting shear forces. Material and Methods: Eighteen fresh calf spines under 1 year of age were used in this study. Two randomly selected spines were used as test materials. The inferior facet and ligamentum flavum were removed in 7 randomly selected spines. In these spines (transdiscal screw group), two transdiscal screws were placed bilaterally between 15 and S1. Tests were performed on the remaining 9 spines, while the spines were initially intact (intact group) and after creating a listhesis model (injury group). The extent of displacement occurring as a result of axial loading was noted in all groups in order to calculate the load-displacement curves. Results: The mean displacement as a result of successive axial loadings of 5000 N was as follows: 3 mm (range: 2.4 - 4 mm) in the intact group, 3.5 mm (range: 3 - 4.5 mm) in the transdiscal screw group and 4.5 mm (range: 3.9 - 5 mm) In the group with injury. The difference was statistically significant (p<0.05). None of the samples exhibited broken screws, screw deformation or dislocation, even in failure tests, in the transdiscal screw group. Discussion: These findings have shown that transdiscal screw fixation can be biomechanically sufficient against the shear forces occurring as a result of axial loading. We believe that this technique can be a good alternative as a fixation method for the L5-S1 spondylolisthesis.Article Citation - WoS: 6Citation - Scopus: 7Human-Robot Interfaces of the Neuroboscope: a Minimally Invasive Endoscopic Pituitary Tumor Surgery Robotic Assistance System(ASME, 2021) Dede, Mehmet İsmet Can; Kiper, Gökhan; Ayav, Tolga; Özdemirel, Barbaros; Tatlıcıoğlu, Enver; Hanalioğlu, Şahin; Işıkay, İlkayEndoscopic endonasal surgery is a commonly practiced minimally invasive neurosurgical operation for the treatment of a wide range of skull base pathologies including pituitary tumors. A common shortcoming of this surgery is the necessity of a third hand when the endoscope has to be handled to allow active use of both hands of the main surgeon. The robot surgery assistant NeuRoboScope system has been developed to take over the endoscope from the main surgeon's hand while providing the surgeon with the necessary means of controlling the location and direction of the endoscope. One of the main novelties of the NeuRoboScope system is its human-robot interface designs which regulate and facilitate the interaction between the surgeon and the robot assistant. The human-robot interaction design of the NeuRoboScope system is investigated in two domains: direct physical interaction (DPI) and master-slave teleoperation (MST). The user study indicating the learning curve and ease of use of the MST is given and this paper is concluded via providing the reader with an outlook of possible new human-robot interfaces for the robot assisted surgery systems.Article Citation - WoS: 12Citation - Scopus: 11Inverted Fins for Cooling of a Non-Uniformly Heated Domain(Yıldız Teknik Üniversitesi, 2015) Çetkin, ErdalThis paper shows that the peak temperature of a non-uniformly heated region can be decreased by embedding high-conductivity tree-shaped inserts which is in contact with a heat sink from its stem. The volume fraction of the high-conductivity material is fixed, and so is the volume of the solid region. The length scale of the solid domain is L. Inside there is a cube-shaped region with length scale of 0.1L and heat production 100 times greater than the rest of the domain. The location of this hot spot was varied to uncover how its location affects the peak temperature and the design of inverted fins, i.e. highconductivity tree-shaped inserts. The volume fraction of the high-conductivity tree was varied for number of bifurcation levels of 0, 1 and 2. This showed that increasing the number of the bifurcation levels decreases the peak temperature when the volume fraction decreases. The optimal diameter ratios and optimal bifurcation angles at the each junction level are also documented. Y-shaped trees promise smaller peak temperatures than T-shaped trees. The location of the vascular tree in the z direction also affects the peak temperature when the heat generation is non-uniform. In addition, the peak temperature is minimum when z = 0.65L even though the hot spot is located on z = 0.75L.Article Citation - WoS: 1Performance Analysis of Thermal Storage Assisted Cooling Tower With Night Cooling(Gazi Üniversitesi, 2020) Ouedraogo, Kiswendsida Elias; Toprak, KasımAs global warming and water scarcity issues continue to grow, it is essential to increase resources efficiency for air conditioners and power plants. In order to increase the efficiency, the systems need to be modified to take the advantages of the low night temperature and thermal storage tanks. In this study, the low night temperature and thermal storage tanks effects on the cooling tower is studied using TRNSYS. Using a chiller operating from 8:00 to 16:00 as a case study, hot water from the condenser is partially stored on daytime and cooled slowly during the night. The storage tank volume is optimized by considering two big tanks and five small tanks. The results show that night cooling reduces cooling water temperature by 5.8 degrees C or 21.8% while the cooling efficiency is increased by 36%. The thermal storage tanks enable to have the low continuous flow rate and help to reduce the fan power by 67.1%. On the storage side, compared to two tanks system, the tanks volume is reduced by 16.5% when 5 tanks are used. In theory this reduction can go up to 50% by increasing the number of tanks and reducing their individual size.Article Citation - WoS: 12Citation - Scopus: 13Assessment of Thermal Comfort Preferences in Mediterranean Climate a University Office Building Case(Vinca Inst Nuclear Sci, 2018) Turhan, Cihan; Gökçen Akkurt, GüldenThis study aims at evaluating the perceived thermal sensation of occupants with respect to thermal comfort standards, ASHRAE 55 and ISO 7730, for office buildings located in Mediterranean climate. A small office building in Izmir Institute of Technology Campus Area, Izmir, Turkey, was chosen as a case building and equipped with measurement devices to assess thermal comfort of occupants with respect to predicted mean vote and actual mean vote. Both objective and subjective measurements were conducted. The former included indoor and outdoor air temperature, mean radiant temperature, relative humidity and air velocity that were used for evaluating the thermal comfort of occupants. Oxygen concentration which can play an additional role in thermal comfort/discomfort, health and productivity of the office occupants, was also measured. Furthermore, occupants were subjected to a survey via a mobile application to obtain subjective measurements to calculate actual mean vote values. Based on objective and subjective measurements, the relationships among the parameters were derived by using simple regression analysis technique while a new combined mean vote correlation was also derived but this time by using multiple linear regression model. Neutral and comfort temperatures were obtained using indoor air temperature and actual mean vote values which were calculated from subjective measurements. The results showed that neutral temperature in the university office building was 20.9 degrees C whilst the comfort temperature range was between 19.4 and 22.4 degrees C for the heating season. By applying new comfort temperatures, energy consumption of the case building located in Mediterranean climate, can be reduced.Article Citation - WoS: 3Validation on of Local Thermal Equilibrium and Uniform Pressure Assumptions for an Isobaric Adsorption Process in an Adsorbent Bed(Türk Isı Bilimi ve Tekniği Derneği, 2016) Gediz İliş, Gamze; Mobedi, Moghtada; Ülkü, SemraBu çalışmanın amacı, adsorbent yatakta ısı ve kütle transferini analiz etmek için kullanılan yerel ısıl denge ve sabit basınç yaklaşımı varsayımların geçerliliğini araştırmaktır. İçerisinde silika jel partikülleri içeren bir yatak ile su kabı olan bir deney düzeneği tasarlanmış ve adsorpsiyon sürecinde yatağın içinde farklı yerlerde yerel sıcaklık ve basınç ölçülmüştür. Ayrıca, sabit basınç yaklaşımı ve yerel ısıl denge varsayımlara dayalı ısı ve kütle transferi denklemleri çözülmüştür. Sayısal sonuçlar, ilgili deneysel sonuçlarla karşılaştırılmış ve aralarında oldukça iyi bir uyum tespit edilmiştir. Gerçekleştirilen karşılaştırmaya dayanarak, incelenen yatak için iki önemli sonuç şu şekildedir: a) katı madde ve su buharı arasında yerel ısıl denge bulunmaktadır, b) bir yatak içinde parçacıklar arası kütle transferi direnci ihmal edilebilir düzeyde olup konsantrasyonunun ve sıcaklığın belirlenmesi için sabit basınç yaklaşımı geçerlidir. Ayrıca, bu çalışmada sunulan deneysel sonuçlar diğer araştırmacıların sayısal çalışmalarının geçerliliğini doğtulamak için değerli veriler sağlayacaktır.Article Citation - WoS: 6Citation - Scopus: 9Impact of Climate Change on Indoor Environment of Historic Libraries in Mediterranean Climate Zone(Inderscience Enterprises, 2019) Turhan, Cihan; Durmuş Arsan, Zeynep; Gökçen Akkurt, GüldenMost historic library buildings house valuable paper-based collections that are kept in unconditioned environments. This vulnerable cultural heritage is expected to be highly affected by climate change in the future. In this study, indoor microclimate of an unconditioned historic library, Necip Pasa Library (Izmir, Turkey) is analysed for existing conditions and future climate data. The measured and predicted indoor microclimate data from 'present' till 2080s are used to determine possible chemical degredation risk on library collection and human comfort. Comparison of periodic results of future climate data indicates an increase in temperature that could cause both an increase in chemical degredation risk on the library collection and a decline in thermal comfort conditions. Mitigation of climate change effects on library collection and human comfort requires taking some actions such as adding light and adaptive mechanical solutions.Article Citation - WoS: 14Citation - Scopus: 14Life Cycle Assessment of Hole Transport Free Planar-Mesoscopic Perovskite Solar Cells(American Institute of Physics, 2020) Sarıaltın, Hüseyin; Geyer, Roland; Zafer, CeylanOrgano-metal lead halide perovskite solar cells (PSCs) attract attention due to their low cost and high power conversion efficiency. Some weak points of this technology are short lifetime, instability, and expensive metal electrode deposition. Eliminating the unstable hole transport layer (HTL) and using carbon-based materials as the counter electrode would address both. In this work, we present a cradle-to-gate life cycle assessment of two HTL-free PSC designs, which use solution phase deposition to achieve mesoscopic and planar structures. Environmental impacts of producing 1 m(2) PSCs are converted to impacts per kWh electricity generation assuming 5years of operational lifetime. We find that major impacts come from fluorine doped tin oxide (FTO) glass patterning due to the electricity consumption of FTO patterning and glass cleaning processes. Even though the electricity consumption when manufacturing both PSCs is similar, their different efficiencies make the environmental impacts per kWh of electricity higher for the mesoscopic PSC than for the planar PSC. Energy payback time values of planar PSCs and mesoscopic PSCs are 0.58 and 0.74years, respectively, and these values are shorter than those of commercial first and second generation solar cells. However, the global warming potential (GWP) values of planar and mesoscopic PSCs are 75 and 94g CO2-eq/kWh, respectively, and these values are still higher than those of commercial solar cells. To reach the GWP of commercial cells, the operational lifetime would have to be 8 and 10years for planar and mesoscopic PSCs, respectively.