Mechanical Engineering / Makina Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4129
Browse
9 results
Search Results
Conference Object Citation - Scopus: 3A Continuously Variable Transmission System Designed for Human–robot Interfaces(Springer, 2021) Mobedi, Emir; Dede, Mehmet İsmet CanWithin a predefined limit, continuously variable transmission (CVT) systems can continuously vary the power transmission ratio. The transmission in CVTs is achieved via friction, belt or gear systems. If CVT designs can incorporate backdrivability, independent output position and impedance variation, shock absorbtion, and low mass and inertia, they can be employed in human–robot interfaces. Among various types of CVT designs, the two-cone drive CVT designs have a major drawback since the output torque and position cannot be changed independent of each other. The friction wheel used in this design does not have a holonomic motion capability and causes this inconvenience. In order to overcome this problem, a sphere is used in this work for the CVT design as the transmission element. In addition, it is stated in the literature that common CVT drive systems do not have the capability to be used in cyclic bidirectional motion. In the presented CVT design, a second sphere is added to the system with two springs from the lower part of the cones for pretension in order to solve the bidirectional transmission problem. In this paper, the working principle and conceptual design details of the novel two-cone CVT drive are presented. Experimental results showed that the novel CVT has the capacity to transmit bidirectional power with some accuracy. © 2021, Springer Nature Singapore Pte Ltd.Conference Object Energy and Exergy Analysis of a Roof-Mounted Photovoltaic System in Gebze-Turkey(Springer, 2024) Khalejan, Seyed Hamed Pour Rahmati; Cankurt, Tolga; Dede, Mehmet İsmet CanThis study investigates the electrical and thermal exergy, power conversion efficiency and exergy efficiency of a roof-mounted photovoltaic (PV) system considering environmental parameters such as solar irradiation, ambient temperature and wind speed over a year. The values of solar exergy and solar potential are obtained by taking into account the solar insolation. Experimental and theoretical results indicate that wind speed and surface temperature have significant effects on the thermal exergy and exergy efficiency of solar PV systems. The mean solar potential in the region was found to be 93%. In addition, the electrical exergy was varied from 9145 W to 40460 W and the thermal exergy of PV systems was varied from 1639 W to 6193 W. While the range of PV power conversion efficiency varies from 6.15% to 11.56% over a year, the range of exergy efficiency varies from 5.31% to 9.78%. © 2024, The Author(s), under exclusive license to Springer Nature Switzerland AG.Article Enabling Personalization of a Robotic Surgery Procedure Via a Surgery Training Simulator(Cambridge University Press, 2022) Dede, Mehmet İsmet Can; Büyüköztekin, Tarık; Hanalıoğlu, Şahin; Işıkay, İlkay; Berker, MustafaAlthough robotic or robot-assisted surgery has been increasingly used by many surgical disciplines, its application in cranial or skull base surgery is still in its infancy. Master-slave teleoperation setting of these robotic systems enables these surgical procedures to be replicated in a virtual reality environment for surgeon training purposes. A variety of teleoperation modes were previously determined with respect to the motion capability of the surgeon's hand that wears the ring as the surgeon handles a surgical tool inside the surgical workspace. In this surgery training simulator developed for a robot-assisted endoscopic skull base surgery, a new strategy is developed to identify the preferred motion axes of the surgeon. This simulator is designed specifically for tuning the teleoperation system for each surgeon via the identification. This tuning capability brings flexibility to adjust the system operation with respect to the motion characteristics of the surgeon.Article Citation - WoS: 4Citation - Scopus: 5Toward Safe and High-Performance Human-Robot Collaboration Via Implementation of Redundancy and Understanding the Effects of Admittance Term Parameters(Cambridge University Press, 2022) Kanık, Mert; Ayit, Orhan; Dede, Mehmet İsmet Can; Tatlıcıoğlu, EnverSummary Today, demandsin industrial manufacturing mandate humans to work with large-scale industrial robots, and this collaboration may result in dangerous conditions for humans. To deal with this situation, this work proposes a novel approach for redundant large-scale industrial robots. In the proposed approach, an admittance controller is designed to regulate the interaction between the end effector of the robot and the human. Additionally, an obstacle avoidance algorithm is implemented in the null space of the robot to prevent any possible unexpected collision between the human and the links of the robot. After safety performance of this approach is verified via simulations and experimental studies, the effect of the parameters of the admittance controller on the performance of collaboration in terms of both accuracy and total human effort is investigated. This investigation is carried out via 8 experiments by the participation of 10 test subjects in which the effect of different admittance controller parameters such as mass and damper are compared. As a result of this investigation, tuning insights for such parameters are revealed.Conference Object Mechanisms, Transmissions and Applications(Springer, 2018) Dede, Mehmet İsmet Can; İtik, Mehmet; Lovasz, Erwin-Christian; Kiper, GökhanThis volume contains the proceedings of MeTrApp 2017, the 4th Conference on Mechanisms, Transmissions and Applications, that was held in Trabzon, Turkey, July 3-5, 2017. The topics treated in this volume are Mechanism Design, Parallel Manipulators, Control Applications, Mechanical Transmissions, Cam Mechanisms, and Dynamics of Machinery. The conference was organised by the IFToMM Technical Committees for “Linkages and Mechanical Controls” and “Gearing and Transmissions” under the patronage of the IFToMM and sponsorship of Karadeniz Technical University, Izmir Institute of Technology and IFToMM Turkey (MAKTED). The aim of the conference was to bring together researchers, scientists, industry experts and students to provide, in a friendly and stimulating environment, the opportunity to exchange know-how and promote collaboration in the field of Mechanism and Machine Science.Conference Object Training and Modelling the Non-Linear Behavior of an Mr Brake by Using Rnn and Lstm(VDE Publishing House, 2021) Karabulut, Mehmet Görkem; Küçükoğlu, Sefa Furkan; Dede, Mehmet İsmet CanA magneto-rheological (MR) fluid-based semi-active actuation system, or in other words, an MR-fluid based brake system, was designed for displaying larger amount of resistive forces without jeopardizing the dynamic performance of a haptic interface. The working principle of the MR brake device depends on the viscous fluid called MR fluid that changes its viscosity when exposed to the magnetic field. Thus, generated resistive torque can be controlled via regulating the magnetic field by modifying the electrical current that passes along a coil which provides this magnetic field.Dynamic system modeling is required in order to develop a high-performance control. In this study, modeling methods of an MR-fluid based brake is investigated in terms of its friction and hysteresis characteristics.There are numerous works in the literature in which two well-known learning sequence methods, Recurrent Neural Network (RNN) and Long Short-Term Memory (LSTM), are used for non-linear dynamic system modeling. In the scope of this study, the performance of RNN and LSTM are compared with the Bouc-Wen model which is commonly used in MR-fluid based system modeling. The effect of learning rate and the number of epoch being the important hyper-parameters, for RNN and LSTM models are investigated.In accordance with these information, both methods can be used for the control purposes of a MR-fluid based brake system. © VDE VERLAG GMBH · Berlin · Offenbach.Book Part An Experimental Setup and Procedure for Stiffness Evaluation of Robot Manipulators(Springer, 2021) Görgülü, İbrahimcan; Paksoy, Erkan; Carbone, Giuseppe; Dede, Mehmet İsmet CanIn this paper, an experimental test setup for stiffness evaluation of a spatial parallel mechanism is introduced. The parallel mechanism used in this study is R-CUBE mechanism. In the test setup, a highly rigid gantry-type manipulator’s end-effector is coupled with the R-CUBE’s mobile platform. As the gantry manipulator is actuated the resultant reaction forces/moments are measured via a force\torque sensor. Subsequently, compliant displacements of R-CUBE are measured by using a coordinate measuring machine. The obtained results are presented and discussed in this paper. © 2021, The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG.Book Part Citation - Scopus: 2Computation Time Efficient Stiffness Analysis of the Modified R-Cube Mechanism(Springer, 2019) Görgülü, İbrahimcan; Dede, Mehmet İsmet CanParallel manipulators are known to be more stiff than the serial manipulators. However, modeling the stiffness for parallel manipulators are difficult compared to serial manipulators due to the constrained structure and passive joints. In addition, computation of the stiffness model for parallel manipulators are exhausting since it requires an iterative solution algorithm due requirement of force-position convergence of all serial chains connecting to the same mobile platform. Direct solutions are faster however, they lack in accuracy. In this study, direct solution is preferred for real-time application and analytic stiffness model of the modified R-CUBE mechanism is obtained by using Virtual Joint Method (VJM). The finite element (FE) model is constructed and simulated to validate the analytical model. Then, a combination of external wrenches $$\pm 5$$ N in various directions are applied on the mobile platform in both FE and VJM in some critical poses. Finally, the computed numerical results are listed and compared along with their computation times. © Springer Nature Switzerland AG 2019Article Citation - WoS: 9Citation - Scopus: 10A Multi-Priority Controller for Industrial Macro-Micro Manipulation(Cambridge University Press, 2021) Uzunoğlu, Emre; Tatlıcıoğlu, Enver; Dede, Mehmet İsmet CanIn this study, a control algorithm is proposed and evaluated for a special type of kinematically redundant manipulator. This manipulator is comprised of two mechanisms, macro and micro mechanisms, with distinct acceleration and work space characteristics. A control algorithm is devised to minimize the task completion duration and the overall actuator effort with respect to the conventional manipulator. A general framework multi-priority controller for macro-micro manipulators is introduced by utilizing virtual dynamics, which is introduced in null-space projection to achieve secondary tasks. The proposed controller is evaluated on a simulation model based on a previously constructed macro-micro manipulator for planar laser cutting. Task completion duration and the total actuator effort are investigated and the results are compared. Copyright © The Author(s), 2020. Published by Cambridge University Press.