Mechanical Engineering / Makina Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4129
Browse
3 results
Search Results
Article Citation - WoS: 10Citation - Scopus: 12Testing and Modeling Blast Loading of a Sandwich Structure Cored With a Bio-Inspired (balanus) Core(Elsevier, 2022) Tüzgel, Fırat; Akbulut, Emine Fulya; Güzel, Erkan; Yücesoy, Atacan; Şahin, Selim; Taşdemirci, Alper; Güden, MustafaThe blast loading response of a sandwich structure consisted of bio-inspired (balanus) cores/units was investigated experimentally and numerically. A Direct Pressure Pulse (DPP) set-up was used to impose a blast-like loading. The equivalent blast conditions corresponding to the used impact velocities were implemented in the models. A benchmark study was performed by using three different methods namely pure Lagrangian, Arbitrary Lagrangian Eulerian, and hybrid. Dynamic crushing behavior was analyzed and exhibited a higher specific energy absorption capacity than its constituents (core and shell). Among the core configurations, all-front configuration was found the most efficient configuration regarding the specific energy absorption.Article Citation - WoS: 12Citation - Scopus: 15Effect of Heat Treatment on the Blast Loading Response of Combined Geometry Shell Core Sandwich Structures(Elsevier Ltd., 2016) Taşdemirci, Alper; Kara, Ali; Turan, Kıvanç; Şahin, Selim; Güden, MustafaThe effect of heat treatment on the dynamic crushing and energy absorption behavior of combined geometry shell cores (hemisphere and cylinder) of sandwich structures were investigated both experimentally and numerically. The applied heat treatment on the combined geometry shell cores relieved the stress caused by deep drawing, diminishing the peak transmitted forces. The verified numerical models of the as-received and heat-treated combined geometry shells were used to model blast loading of various sandwich configurations and the additional sandwich configurations of reversing the cylindrical side of the cores to the impacted side. Both the applied heat-treatment and the reversing process decreased the magnitude of the force transmitted to the protected structure. The applied heat treatment increased the arrival time of blast force wave to the protected structure, while the reversing resulted in opposite.Article Citation - WoS: 14Citation - Scopus: 18Dynamic Crushing and Energy Absorption of Sandwich Structures With Combined Geometry Shell Cores(Elsevier Ltd., 2015) Taşdemirci, Alper; Kara, Ali; Turan, Kıvanç; Şahin, SelimDynamic crushing and energy absorption characteristics of sandwich structures with combined geometry shell cores were investigated experimentally and numerically. The effect of strain rate on the crushing behavior was presented by the crushing tests at quasi-static, intermediate and high strain rate regimes. It was shown that absorbed energy increased with increasing impact velocity. The effect of confinement on crushing behavior was shown by conducting confined experiments at quasi-static and dynamic rates. Higher buckling loads at lower deformation were observed in confined quasi-static crushing due to additional lateral support and friction provided by confinement wall. By using fictitious numerical models with strain rate insensitive material models, the effect of inertia and strain rate on crushing were shown. It was observed that, increase in impact velocity caused increase in inertial effects and strain rate effects were nearly independent from the impact velocity. The effects of multilayering were also investigated numerically.