Mechanical Engineering / Makina Mühendisliği

Permanent URI for this collectionhttps://hdl.handle.net/11147/4129

Browse

Filters

2018 - 201922020 - 20248

Settings

Has files: NoPublisher: search.filters.publisher.Springer

Search Results

Now showing 1 - 10 of 10
  • Conference Object
    Citation - Scopus: 3
    A Continuously Variable Transmission System Designed for Human–robot Interfaces
    (Springer, 2021) Mobedi, Emir; Dede, Mehmet İsmet Can
    Within a predefined limit, continuously variable transmission (CVT) systems can continuously vary the power transmission ratio. The transmission in CVTs is achieved via friction, belt or gear systems. If CVT designs can incorporate backdrivability, independent output position and impedance variation, shock absorbtion, and low mass and inertia, they can be employed in human–robot interfaces. Among various types of CVT designs, the two-cone drive CVT designs have a major drawback since the output torque and position cannot be changed independent of each other. The friction wheel used in this design does not have a holonomic motion capability and causes this inconvenience. In order to overcome this problem, a sphere is used in this work for the CVT design as the transmission element. In addition, it is stated in the literature that common CVT drive systems do not have the capability to be used in cyclic bidirectional motion. In the presented CVT design, a second sphere is added to the system with two springs from the lower part of the cones for pretension in order to solve the bidirectional transmission problem. In this paper, the working principle and conceptual design details of the novel two-cone CVT drive are presented. Experimental results showed that the novel CVT has the capacity to transmit bidirectional power with some accuracy. © 2021, Springer Nature Singapore Pte Ltd.
  • Book Part
    Citation - WoS: 1
    Citation - Scopus: 1
    A Historical Review of Polyhedral Linkages
    (Springer, 2024) Kiper, Gökhan
    Polyhedral linkages are linkages that resemble polyhedral shapes at different configurations. This paper summarizes the necessary geometrical fundamentals of polyhedral geometry and presents a historical and critical review of the polyhedral linkage designs available in the literature. Basic definitions of polyhedral geometry and operations are needed to comprehend and design polyhedral linkages. First, early works on polyhedral linkages are presented, where flexible polyhedra with rigid faces and flexible edges are issued. The final part is reserved to conformal polyhedral linkages, which go through shape transformations while plane, dihedral and solid angles are preserved. Conformal polyhedral linkages are examined in four categories: 1) Jitterbug-like linkages with screwing polygonal links connected to each other with dihedral angle preserving links, 2) polyhedral linkages with planar kinematic chains in radial motion planes, 3) polyhedral linkages with planar kinematic chains on faces, that are connected to each other with dihedral angle preserving links, and 4) other conformal polyhedral linkages. © The Author(s), under exclusive license to Springer Nature Switzerland AG 2024.
  • Article
    Citation - WoS: 2
    Citation - Scopus: 3
    Design and Manufacturing of a Hip Joint Motion Simulator With a Novel Modular Design Approach
    (Springer, 2024) Torabnia, S.; Mihçin, D.Ş.; Lazoglu, I.
    The study is aimed to develop a hip joint wear simulator using a modular design approach to help experimentally monitor and control critical wear parameters to validate in-silico wear models. The proper control and application of wear parameters such as the range of motion, and the applied force values while estimating the lost material due to wear are essential for thorough analysis of wear phenomena for artificial joints. The simulator's dynamics were first modeled, then dynamic loading data was used to calculate the forces, which were further used for topology optimization to reduce the forces acting on each joint. The reduction of the link weights, connected to the actuators, intends to improve the quality of motion transferred to the femoral head. The modular design approach enables topology-optimized geometry, associated gravitational and dynamic forces, resulting in a cost-effective, energy-efficient product. Moreover, this design allows integration of the subject specific data by allowing different boundary conditions following the requirements of industry 5.0. Overall, the in-vitro motion stimulations of the hip-joint prosthesis and the modular design approach used in the study might help improve the accuracy and the effectiveness of wear simulations, which could lead into the development of better and longer-lasting joint prostheses for all. The subject-specific and society-based daily life data implemented as boundary conditions enable inclusion of the personalized effects. Next, with the results of the simulator, CEN Workshop Agreement (CWA) application is intended to cover the personalized effects for previously excluded populations, providing solution to inclusive design for all. © 2023, The Author(s), under exclusive licence to Springer-Verlag France SAS, part of Springer Nature.
  • Conference Object
    Energy and Exergy Analysis of a Roof-Mounted Photovoltaic System in Gebze-Turkey
    (Springer, 2024) Khalejan, Seyed Hamed Pour Rahmati; Cankurt, Tolga; Dede, Mehmet İsmet Can
    This study investigates the electrical and thermal exergy, power conversion efficiency and exergy efficiency of a roof-mounted photovoltaic (PV) system considering environmental parameters such as solar irradiation, ambient temperature and wind speed over a year. The values of solar exergy and solar potential are obtained by taking into account the solar insolation. Experimental and theoretical results indicate that wind speed and surface temperature have significant effects on the thermal exergy and exergy efficiency of solar PV systems. The mean solar potential in the region was found to be 93%. In addition, the electrical exergy was varied from 9145 W to 40460 W and the thermal exergy of PV systems was varied from 1639 W to 6193 W. While the range of PV power conversion efficiency varies from 6.15% to 11.56% over a year, the range of exergy efficiency varies from 5.31% to 9.78%. © 2024, The Author(s), under exclusive license to Springer Nature Switzerland AG.
  • Conference Object
    Asymmetry in the Tension and Compression Flow Stress and the Effect of Sub-Cell Size on the Hardness of a Selective Laser Melt 316l Stainless Steel
    (Springer, 2022) Güden, Mustafa; Enser, Samed; Arslan Hamat, Burcu; Tanrıkulu, A. Alptuğ; Yavaş, Hakan
    An asymmetry between tension and compression tests was determined experimentally in the Selective Laser Melt (SLM) stainless steel 316L alloy in the building direction. The asymmetry was ascribed to the used biaxial scanning strategy which resulted in a strong alignment of 〈110〉 along the build direction (fiber texture) and a random distribution of 〈100〉, 〈110〉 and 〈111〉 directions normal to the building direction. The strong fiber texture in the building direction induced lower twinning stress in tension than in compression, while the tension and compression twining stresses were found similar in the normal to building direction. The favored twinning in the specimens tested in the building direction resulted in a higher tensile true fracture strain; hence, a higher ductility. Lastly, the hardness measurements made on the specimens having similar gain sizes, but different sub-cell sizes processed using higher and lower laser powers tended to support that the sub-cell boundaries in SLM-316L alloy acted as imperfect barriers to the dislocation motion.
  • Conference Object
    Mechanisms, Transmissions and Applications
    (Springer, 2018) Dede, Mehmet İsmet Can; İtik, Mehmet; Lovasz, Erwin-Christian; Kiper, Gökhan
    This volume contains the proceedings of MeTrApp 2017, the 4th Conference on Mechanisms, Transmissions and Applications, that was held in Trabzon, Turkey, July 3-5, 2017. The topics treated in this volume are Mechanism Design, Parallel Manipulators, Control Applications, Mechanical Transmissions, Cam Mechanisms, and Dynamics of Machinery. The conference was organised by the IFToMM Technical Committees for “Linkages and Mechanical Controls” and “Gearing and Transmissions” under the patronage of the IFToMM and sponsorship of Karadeniz Technical University, Izmir Institute of Technology and IFToMM Turkey (MAKTED). The aim of the conference was to bring together researchers, scientists, industry experts and students to provide, in a friendly and stimulating environment, the opportunity to exchange know-how and promote collaboration in the field of Mechanism and Machine Science.
  • Conference Object
    Citation - Scopus: 26
    Optimization of Hip Implant Designs Based on Its Mechanical Behaviour
    (Springer, 2022) Göktaş, Hasan; Subaşı, Eda; Uzkut, Metin; Kara, Mustafa; Biçici, Hamit; Shirazi, Hadi; Mihçin, Şenay
    Total Hip Arthroplasty (THA) is one of the best advancements in healthcare. THA is required when the hip joint causes immobility and pain. The designed hip implants vary in geometry with different geometrical parameters. The geometry plays an important role in the mechanical behavior of the hip implant. In this study, the optimum selection of hip implant under static loading was evaluated using Finite Element Modeling (FEM). Hip implants with three different stem cross-sections including. (a) elliptic, (b) oval, and (c) trapezoidal were designed using a commercial Computer-Aided Design (CAD) software package. The FEM analysis was carried out via ANSYS R2019 to assess the key mechanical parameters of the implants such as stress distribution and deformation. The results were evaluated for the best stress and strain values. The optimum design had equivalent stress (von Misses) of 258,1 MPa, equivalent strain of 0.004, with total deformation of 0.24 mm and frictional stress of 0.362 MPa producing best values for trapezoidal cross-sectioned design. The findings of this study provided an insight into the selection of appropriate hip implant design with certain geometric design parameters to produce optimum results in clinical applications. © 2022, The Author(s), under exclusive license to Springer Nature Switzerland AG.
  • Conference Object
    Citation - Scopus: 14
    Mechanical Investigation for the Use of Polylactic Acid in Total Hip Arthroplasty Using Fem Analysis
    (Springer, 2022) Çelik, Emre; Alemdar, Furkan; Batı, Murat; Daşdemir, Muhammed Furkan; Büyükbayraktar, Onur Alp; Chethan, K.N.; Mihçin, Şenay
    Polylactic acid (PLA) is a biodegradable non-toxic, biocompatible polymer used as a popular filament material in biomedical applications with the advance of 3D printing technologies. PLA is considered a suitable implant material due to its contribution to bone regeneration. In this study, the use of PLA in Total Hip Arthroplasty (THA) as a liner material was assessed. In this regard, the PLA liner with different material combinations in THA was examined to provide evidence for its potential. The hip implant prototypewas drawn using a computer-aided design tool then transferred into a commercial finite element analysis (FEA) software. The prototypesconsisted of assemblies of PLA with titanium, chrome cobalt, stainless steels, dense NiTi shape-alloys, and Alumina-Zirconia. Simulations were run under static loading conditions. To evaluate and compare the results for the optimum design; factor of safety, total deformation and von Mises stress analysis were used. The results show that Co-Cr implemented implants produce the highest factor of safety. When Al-Zi combined with PLA, it produced least deformation and reasonable von- Mises stress values. PLA might perform best when used with Al-Zi. As a next step, experimental pre-clinical tests are planned to assess the clinical potential. © 2022, The Author(s), under exclusive license to Springer Nature Switzerland AG.
  • Book Part
    An Experimental Setup and Procedure for Stiffness Evaluation of Robot Manipulators
    (Springer, 2021) Görgülü, İbrahimcan; Paksoy, Erkan; Carbone, Giuseppe; Dede, Mehmet İsmet Can
    In this paper, an experimental test setup for stiffness evaluation of a spatial parallel mechanism is introduced. The parallel mechanism used in this study is R-CUBE mechanism. In the test setup, a highly rigid gantry-type manipulator’s end-effector is coupled with the R-CUBE’s mobile platform. As the gantry manipulator is actuated the resultant reaction forces/moments are measured via a force\torque sensor. Subsequently, compliant displacements of R-CUBE are measured by using a coordinate measuring machine. The obtained results are presented and discussed in this paper. © 2021, The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG.
  • Book Part
    Citation - Scopus: 2
    Computation Time Efficient Stiffness Analysis of the Modified R-Cube Mechanism
    (Springer, 2019) Görgülü, İbrahimcan; Dede, Mehmet İsmet Can
    Parallel manipulators are known to be more stiff than the serial manipulators. However, modeling the stiffness for parallel manipulators are difficult compared to serial manipulators due to the constrained structure and passive joints. In addition, computation of the stiffness model for parallel manipulators are exhausting since it requires an iterative solution algorithm due requirement of force-position convergence of all serial chains connecting to the same mobile platform. Direct solutions are faster however, they lack in accuracy. In this study, direct solution is preferred for real-time application and analytic stiffness model of the modified R-CUBE mechanism is obtained by using Virtual Joint Method (VJM). The finite element (FE) model is constructed and simulated to validate the analytical model. Then, a combination of external wrenches $$\pm 5$$ N in various directions are applied on the mobile platform in both FE and VJM in some critical poses. Finally, the computed numerical results are listed and compared along with their computation times. © Springer Nature Switzerland AG 2019