Mechanical Engineering / Makina Mühendisliği

Permanent URI for this collectionhttps://hdl.handle.net/11147/4129

Browse

Filters

2009 - 200912020 - 20221

Settings

Has files: NoWoS Q: search.filters.wosQuartile.Q4

Search Results

Now showing 1 - 2 of 2
  • Article
    Citation - WoS: 2
    The Effect of the Temperature of Heat Treatment Process and the Concentration and Duration of Acid Leaching on the Size and Crystallinity of Nano-Silica Powders Formed by the Dissociation of Natural Diatom Frustule
    (American Scientific Publishers, 2022) Ülker, Sevkan; Güden, Mustafa
    The present study focused on the processing of nano-silica powders in varying sizes and crystallinities through IP: 846247.10 On: Wed, 14 Dec 2022 07:29:25 heat treatment (900-1200 degrees C), hydrofluoric acid leaching (1-7 N), and ball milling (1 h, 500 rpm) of natural Copyright American Scentfic P blishers diatom frustules. The starting natural frustules were determined to be composed of amorphous silica (88%) Delivered by Ingenta and quartz. The partially ordered crystalline low-quartz and or precursor to low-cristobalite started to form at-900 degrees C. As the heat treatment temperature increased, the crystallinity of the frustules increased from 9.3% at 25 degrees C to 46% at 1200 degrees C. Applying a ball milling reduced the mean particle sizes of the as-received and heat-treated frustules from 15.6-13.7 mu m to 7.2-6.7 mu m, respectively. Acid leaching of the as-received and heat-treated frustules resulted in a further increase in the crystallinity. Furthermore, a ball milling applied after an acid leaching was very effective in reducing the particle size of the as-received and heat-treated frustules. The mean particle size of the acid-leached frustules decreased to 774-547 nm with a crystallinity varying between 12 and 48% after ball milling. A partially dissolved amorphous phase was observed in between crystalline silica grains after acid leaching, which resulted in a rapid fracture/separation of the frustules in ball milling.
  • Article
    Citation - Scopus: 1
    Sizing of Autonomous Wind/Solar Hybrid Energy Conversion Systems for Urla, Turkey
    (ACTA Press, 2009) Özerdem, Barış; Ekren, Orhan
    In this paper, an optimum sizing procedure of autonomous hybrid (wind + solar) energy system is presented which can be used to satisfy the requirements of given load distribution. The main purpose of this study is to find out an appropriate wind-photovoltaic hybrid energy system to satisfy electricity consumption of GSM (Global System for Mobile communication) base station at Izmir Institute of Technology Campus Area, Urla, Izmir, Turkey. To do this, monthly average daily solar radiation and wind speed data are collected. The monthly average wind speeds are measured at 10 m height during 3 years period on Izmir Institute of Technology Campus Area. The monthly average wind speed values are obtained between 5.7 and 7.7 m/s, on the other hand, the monthly average daily value of solar radiations on horizontal surfaces are ranged from 1.4 to 6.9kWh/m2 at Izmir Institute of Technology Campus Area. The hybrid system considered in the present analysis consists of one 5kW nominal power wind energy conversion systems (WECS), 21.82 m2 of photovoltaic (PV) panels (18 mono crystal PV panels each having 75 W power output) together with a battery storage system.