Mechanical Engineering / Makina Mühendisliği

Permanent URI for this collectionhttps://hdl.handle.net/11147/4129

Browse

Filters

2000 - 2009462010 - 2019882020 - 202532

Settings

COAR Resource Type: search.filters.itemCoarResourceType.text::conference output

Search Results

Now showing 1 - 10 of 166
  • Conference Object
    A Comparative Study of Attention-Augmented YOLO Architectures for Defect Detection in Fused Deposition Modelling
    (Institute of Electrical and Electronics Engineers Inc., 2025) Cezayirli, H.; Tetik, H.; Dede, M.I.C.; Phone, W.L.; Alkan, B.
    Additive manufacturing (AM), particularly fused deposition modelling (FDM), facilitates the fabrication of complex geometries with increasing flexibility and efficiency. Ensuring consistent print quality in FDM processes necessitates the development of accurate defect detection mechanisms. Attention-augmented YOLO (You Only Look Once) models have emerged as a promising solution for addressing this challenge. In this study, we systematically benchmark and evaluate the performance of YOLO architectures enhanced with attention mechanisms within the context of FDM 3D printing applications. The models were trained and evaluated using representative defect datasets. The attention-augmented models demonstrate improved detection performance. © 2025 IEEE.
  • Conference Object
    Redundancy resolution options for the twin-it-romans robotic hybrid manufacturing system
    (Springer Science and Business Media B.V., 2025) Gündüz, G.M.; Dede, Mehmet İsmet Can; Kiper, Gökhan; Schmitz, M.; Corves, B.
    The Twinnig Iztech in Robotics Manufacturing System (TWIN-IT-ROMANS) project funded by EU Horizon -Widera-2023-Access-02-01 aims to develop a hybrid manufacturing system that can perform additive and subtractive manufacturing processes and inline quality control using a robotic system. The system will incorporate a 6-degree-of-freedom robot arm and a positioner with 2-degree-of-freedom, which will operate synchronously. This manipulation system is to be designed for performing different manufacturing operations with different degrees-of-freedom requirements. In order to reveal alternative trajectory planning scenarios for this system, this paper presents an initial review of redundancy resolution approaches for kinematically redundant robotic manipulators. First, the four main approaches for redundancy resolution techniques are introduced. Then main studies on energy minimization and stiffness maximization for kinematically redundant robotic manipulators are reviewed. Similar or new approaches are planned to be generated and implemented for the redundant system for hybrid manufacturing. © The Author(s), under exclusive license to Springer Nature Switzerland AG 2025.
  • Conference Object
    Towards Sustainable Manufacturing: a Review and Future Directions in Additive Manufacturing of Fiber-Reinforced Polymer Composites
    (Springer Science and Business Media B.V., 2025) Türkcan, M.Y.; Tetik, Halil; Kurt, B.; Dede, Mehmet İsmet Can; Karaş, B.; Tetik, H.; Shokrani, A.; Dede, M.İ.C.
    The United Nations Sustainable Development Goals (SDGs) provide a global framework for addressing critical challenges such as climate change, resource scarcity and sustainable industrialization. With increasing demand for products and improving quality of life, linear consumption of materials and resources following the “take-make-waste” is no longer possible. As such, innovative solutions are increasingly necessary to enable circular economy in manufacturing. Additive manufacturing (AM) has emerged as a transformative technology in achieving SDGs by enhancing resource efficiency and minimizing waste. Fiber reinforced composites are a promising application of AM, as they offer the potential to optimize material use, reduce labor and support sustainable production practices. However, there is an urgent need for considering circular economy strategies, life cycle assessment (LCA) frameworks and effective recycling at the end of their lifetime. This study examines additive manufacturing systems for fiber-reinforced composites, their environmental impact and exploring the potential contributions of robotic integration in composite manufacturing to enhanced sustainability. © The Author(s), under exclusive license to Springer Nature Switzerland AG 2025.
  • Conference Object
    Kinematic Design of a Novel Finger Exoskeleton Mechanism for Rehabilitation Exercises
    (Springer international Publishing Ag, 2024) Kiper, Gokhan; Inanc, Emirhan
    The paper presents the kinematic design of a novel low-cost two degree-of-freedom finger exoskeleton mechanism to be used for rehabilitation exercises for post-stroke or injured patients. The first degree-of freedom is for the flexion/extension of metacarpophalangeal joint and is achieved via a planar 4-bar loop. The second degree-of-freedom is for the simultaneous flexion/extension of distal/proximal interphalangeal joints and is achieved via an over-constrained double-spherical 6-bar linkage, where 3 of the links are the phalanges of the finger and 2 of the joints are finger joints themselves. So, the number of extra links are less compared to other designs in the literature. The motion of an index finger is recorded via image processing. The four-bar mechanism part is designed for optimum transmission angle characteristics. The formulation and application of the kinematic synthesis of the 6-bar linkage is presented. The design is verified via a prototype.
  • Conference Object
    Citation - Scopus: 3
    A Continuously Variable Transmission System Designed for Human–robot Interfaces
    (Springer, 2021) Mobedi, Emir; Dede, Mehmet İsmet Can
    Within a predefined limit, continuously variable transmission (CVT) systems can continuously vary the power transmission ratio. The transmission in CVTs is achieved via friction, belt or gear systems. If CVT designs can incorporate backdrivability, independent output position and impedance variation, shock absorbtion, and low mass and inertia, they can be employed in human–robot interfaces. Among various types of CVT designs, the two-cone drive CVT designs have a major drawback since the output torque and position cannot be changed independent of each other. The friction wheel used in this design does not have a holonomic motion capability and causes this inconvenience. In order to overcome this problem, a sphere is used in this work for the CVT design as the transmission element. In addition, it is stated in the literature that common CVT drive systems do not have the capability to be used in cyclic bidirectional motion. In the presented CVT design, a second sphere is added to the system with two springs from the lower part of the cones for pretension in order to solve the bidirectional transmission problem. In this paper, the working principle and conceptual design details of the novel two-cone CVT drive are presented. Experimental results showed that the novel CVT has the capacity to transmit bidirectional power with some accuracy. © 2021, Springer Nature Singapore Pte Ltd.
  • Conference Object
    Determination of Interfacial Heat Transfer Coefficient for a Mixed Convection Heat Transfer in a Vertical Channel Filled With Uniformly Heated Blocks
    (Begell House Inc., 2015) Çelik, Hasan; Mobedi, Moghtada; Manca,O.; Buonomo,B.
    The interfacial convective heat transfer coefficient of a periodic porous medium under mixed convection heat transfer is determined computationally by using volume averaging method. The porous medium consists of square blocks in inline arrangement. The continuity, momentum and energy equations are solved in dimensionless form for a representative elementary volume of porous medium and the velocity and temperature fields for different values of Richardson and Reynolds numbers are obtained. Based on the obtained results, the interfacial convective heat transfer coefficient is calculated by using volume average method. The temperature of the solid phase is considered uniform and different than the inlet temperature. A detailed discussion on the effect of the governing dimensionless parameters (i.e. Reynolds, Richardson numbers, and porosity) on the local and average interfacial Nusselt number is done. It is concluded that the local interfacial convective heat transfer coefficient increases with Reynolds number, however the rate of increase depends on Richardson number and porosity. The study is performed for two values of porosity of 0.51 and 0.94. © 2021, Begell House Inc. All rights reserved.
  • Conference Object
    A Numerical Study on the Determination of the Effects of Pore To Throat Size Ratio on the Thermal Dispersion in Porous Media
    (Begell House, 2014) Özgümüş, Türküler; Mobedi, Moghtada; Özkol, Ünver
    Direct pore-level numerical simulations are widely used to estimate macroscopic properties of fluid flow and heat transfer in porous media. Thermal dispersion is one of the most important macroscopic transport parameters for analyzing convective heat transfer in a porous medium. It should be known in order to predict the macroscopic temperature distribution. In the present study, a microscopic scale analysis is performed for a porous medium with periodic structure. A representative elementary volume is chosen from an infinite medium consists of rectangular rods in inline arrangement. The continuity and momentum equations are solved to obtain flow field and the energy equations for fluid and solid phases are solved to obtain microscopic temperature distributions in two phases. There are velocity and temperature deviations between macroscopic and microscopic local values. Volume averaging method is applied to the computed deviations and thermal dispersion conductivity of porous media is determined. The aim of this study is to analyze the effects of pore to throat size ratio on the longitudinal and transverse thermal dispersion in porous media. The study is performed for representative elementary volumes with different pore to throat size ratios and Reynolds numbers from 1 to 100. The study is performed for high porosity porous media (ε = 0.7 and 0.91). It is shown that the porosity and pore to throat size ratio have more influence on the transverse rather than longitudinal thermal dispersion. © 2014, Begell House Inc. All rights reserved.
  • Conference Object
    Energy and Exergy Analysis of a Roof-Mounted Photovoltaic System in Gebze-Turkey
    (Springer, 2024) Khalejan, Seyed Hamed Pour Rahmati; Cankurt, Tolga; Dede, Mehmet İsmet Can
    This study investigates the electrical and thermal exergy, power conversion efficiency and exergy efficiency of a roof-mounted photovoltaic (PV) system considering environmental parameters such as solar irradiation, ambient temperature and wind speed over a year. The values of solar exergy and solar potential are obtained by taking into account the solar insolation. Experimental and theoretical results indicate that wind speed and surface temperature have significant effects on the thermal exergy and exergy efficiency of solar PV systems. The mean solar potential in the region was found to be 93%. In addition, the electrical exergy was varied from 9145 W to 40460 W and the thermal exergy of PV systems was varied from 1639 W to 6193 W. While the range of PV power conversion efficiency varies from 6.15% to 11.56% over a year, the range of exergy efficiency varies from 5.31% to 9.78%. © 2024, The Author(s), under exclusive license to Springer Nature Switzerland AG.
  • Conference Object
    Citation - Scopus: 3
    Four-bar function generation using excel solver
    (Springer, 2023) Söylemez, Eres; Kiper, Gökhan
    The Chapter presents a simple and efficient way of approximating a function with a four-bar mechanism using four or five design parameters including one or both of the initial crank angles. The method only involves solution of linear set of equations and evaluating determinants, whereas nonlinear equations are numerically solved using a simple program such as Excel. So, the method is easy to explain and can be taught in an undergraduate course along with the wellknown linear three precision point synthesis problem. Precision point synthesis, order synthesis, mixed order synthesis, least squares approximation and extreme point synthesis can all be treated using the same method. The proposed method is illustrated with numerical examples for all mentioned synthesis problems and shown to be quite efficient with very low amount of structural error values.
  • Conference Object
    Citation - Scopus: 3
    Design and Balancing of a Novel 2r1t Manipulator With Remote Center of Motion
    (Springer, 2023) Yılmaz, Tuğrul; Kiper, Gökhan
    The paper presents a novel manipulator design to be used as an endoscope holder for endonasal skull base surgeries. The manipulator should provide two rotational and one translational motions for the endoscope, where it should be able to be oriented about and slide along the tip of the nostril of a patient as a pivot point. First, suitable manipulators with remote center motion are investigated. Manipulators with serial and hybrid kinematic structure and redundant manipulators with a passive joint are examined. A serial manipulator with a circular arc as the second rotation axis is chosen for the detailed design. The novelty of the kinematic structure of the manipulator is that the end-effector heave motion is achieved in a tangential direction to the circular arc. The constructional design and counter-mass balancing solution for the manipulator are presented. The total assembly mass is 11.6 kg for navigating an endoscope of 0.44 kg mass.