Mechanical Engineering / Makina Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4129
Browse
11 results
Search Results
Article Citation - WoS: 7Citation - Scopus: 7A Comprehensive Study on Burst Pressure Performance of Aluminum Liner for Hydrogen Storage Vessels(ASME, 2021) Kangal, Serkan; Sayı, Abdülmecit Harun; Ayakdaş, Ozan; Kartav, Osman; Aydın, Levent; Artem, Hatice Seçil; Aktaş, Engin; Yücetürk, Kutay; Tanoğlu, Metin; Kandemir, Sinan; Beylergil, BertanThis paper presents a comparative study on the burst pressure performance of aluminum (Al) liner for type-III composite overwrapped pressure vessels (COPVs). In the analysis, the vessels were loaded with increasing internal pressure up to the burst pressure level. In the analytical part of the study, the burst pressure of the cylindrical part was predicted based on the modified von Mises, Tresca, and average shear stress criterion (ASSC). In the numerical analysis, a finite element (FE) model was established in order to predict the behavior of the vessel as a function of increasing internal pressure and determine the final burst. The Al pressure vessels made of Al-6061-T6 alloy with a capacity of 5 L were designed. The manufacturing of the metallic vessels was purchased from a metal forming company. The experimental study was conducted by pressurizing the Al vessels until the burst failure occurred. The radial and axial strain behaviors were monitored at various locations on the vessels during loading. The results obtained through analytical, numerical, and experimental work were compared. The average experimental burst pressure of the vessels was found to be 279 bar. The experimental strain data were compared with the results of the FE analysis. The results indicated that the FE analysis and ASSC-based elastoplastic analytical approaches yielded the best predictions which are within 2.2% of the experimental burst failure values. It was also found that the elastic analysis underestimated the burst failure results; however, it was effective for determining the critical regions over the vessel structure. The strain behavior of the vessels obtained through experimental investigations was well correlated with those predicted through FE analysis.Conference Object Citation - Scopus: 26Optimization of Hip Implant Designs Based on Its Mechanical Behaviour(Springer, 2022) Göktaş, Hasan; Subaşı, Eda; Uzkut, Metin; Kara, Mustafa; Biçici, Hamit; Shirazi, Hadi; Mihçin, ŞenayTotal Hip Arthroplasty (THA) is one of the best advancements in healthcare. THA is required when the hip joint causes immobility and pain. The designed hip implants vary in geometry with different geometrical parameters. The geometry plays an important role in the mechanical behavior of the hip implant. In this study, the optimum selection of hip implant under static loading was evaluated using Finite Element Modeling (FEM). Hip implants with three different stem cross-sections including. (a) elliptic, (b) oval, and (c) trapezoidal were designed using a commercial Computer-Aided Design (CAD) software package. The FEM analysis was carried out via ANSYS R2019 to assess the key mechanical parameters of the implants such as stress distribution and deformation. The results were evaluated for the best stress and strain values. The optimum design had equivalent stress (von Misses) of 258,1 MPa, equivalent strain of 0.004, with total deformation of 0.24 mm and frictional stress of 0.362 MPa producing best values for trapezoidal cross-sectioned design. The findings of this study provided an insight into the selection of appropriate hip implant design with certain geometric design parameters to produce optimum results in clinical applications. © 2022, The Author(s), under exclusive license to Springer Nature Switzerland AG.Article Citation - WoS: 8Citation - Scopus: 8Free Vibration Analysis of Damaged Composite Beams(Techno Press, 2015) Cünedioğlu, Yusuf; Beylergil, BertanIn this study, free vibration analyses of symmetric laminated cantilever and simply supported damaged composite beams are investigated by using finite element method (FEM). Free vibration responses of damaged beams are examined using Euler Bernoulli beam and classical lamination theories. A computer code is developed by using MATLAB software to determine the natural frequencies of a damaged beam. The local damage zone is assumed to be on the surface lamina of the beam by broken fibers after impact. The damaged zone is modeled as a unidirectional discontinuous lamina with 0 degrees orientations in this study. Fiber volume fraction (v(f)), fiber aspect ratio (L-f/d(f)), damage length (L-D) and its location (lambda/L), fiber orientation and stacking sequence parameters effects on natural frequencies are investigated. These parameters are affected the natural frequency values significantly.Article Citation - WoS: 6Citation - Scopus: 7The Effect of Perforations on the Stress Wave Propagation Characteristics of Multilayered Materials(SAGE Publications Inc., 2016) Taşdemirci, Alper; Kara, AliThe effect of perforated interlayers on the stress wave transmission of multilayered materials was investigated both experimentally and numerically using the Split Hopkinson pressure bar (SHPB) testing. The multilayer combinations consisted of a ceramic face plate and a glass/epoxy backing plate with a laterally constrained low modulus solid or perforated rubber and Teflon interlayer. The perforations on rubber interlayer delayed the stress rise time and reduced the magnitude of the transmitted stress wave at low strains, while the perforations allowed the passage of relatively high transmitted stresses at large strains similar to the solid rubber interlayer. It was concluded that the effect of perforations were somewhat less pronounced in Teflon interlayer configuration, arising from its relatively low Poisson's ratio. It was finally shown that SHPB testing accompanied with the numerical simulations can be used to analyze the effect of compliant interlayer insertion in the multilayered structures. © The Author(s) 2015.Article Citation - WoS: 25Citation - Scopus: 27Trabecular Bone Recovers From Mechanical Unloading Primarily by Restoring Its Mechanical Function Rather Than Its Morphology(Elsevier Ltd., 2014) Özçivici, Engin; Judex, StefanUpon returning to normal ambulatory activities, the recovery of trabecular bone lost during unloading is limited. Here, using a mouse population that displayed a large range of skeletal susceptibility to unloading and reambulation, we tested the impact of changes in trabecular bone morphology during unloading and reambulation on its simulated mechanical properties. Female adult mice from a double cross of BALB/cByJ and C3H/HeJ strains (n = 352) underwent 3. wk of hindlimb unloading followed by 3. wk of reambulation. Normally ambulating mice served as controls (n = 30). As quantified longitudinally by in vivo μCT, unloading led to an average loss of 43% of trabecular bone volume fraction (BV/TV) in the distal femur. Finite element models of the μCT tomographies showed that deterioration of the trabecular structure raised trabecular peak Von-Mises (PVM) stresses on average by 27%, indicating a significant increase in the risk of mechanical failure compared to baseline. Further, skewness of the Von-Mises stress distributions (SVM) increased by 104% with unloading, indicating that the trabecular structure became inefficient in resisting the applied load. During reambulation, bone of experimental mice recovered on average only 10% of its lost BV/TV. Even though the addition of trabecular tissue was small during reambulation, PVM and SVM as indicators of risk of mechanical failure decreased by 56% and 57%, respectively. Large individual differences in the response of trabecular bone, together with a large sample size, facilitated stratification of experimental mice based on the level of recovery. As a fraction of all mice, 66% of the population showed some degree of recovery in BV/TV while in 89% and 87% of all mice, PVM and SVM decreased during reambulation, respectively. At the end of the reambulation phase, only 8% of the population recovered half of the unloading induced losses in BV/TV while 50% and 49% of the population recovered half of the unloading induced deterioration in PVM and SVM, respectively. The association between morphological and mechanical variables was strong at baseline but progressively decreased during the unloading and reambulation cycles. The preferential recovery of trabecular micromechanical properties over bone volume fraction emphasizes that mechanical demand during reambulation does not, at least initially, seek to restore bone's morphology but its mechanical integrity.Article Citation - WoS: 8Citation - Scopus: 9Quantitative Trait Loci That Modulate Trabecular Bone's Risk of Failure During Unloading and Reloading(Elsevier Ltd., 2014) Özçivici, Engin; Zhang, Weidong; Donahue, Leah Rae; Judex, StefanGenetic makeup of an individual is a strong determinant of the morphologic and mechanical properties of bone. Here, in an effort to identify quantitative trait loci (QTLs) for changes in the simulated mechanical parameters of trabecular bone during altered mechanical demand, we subjected 352. second generation female adult (16. weeks old) BALBxC3H mice to 3. weeks of hindlimb unloading followed by 3. weeks of reambulation. Longitudinal in vivo microcomputed tomography (μCT) scans tracked trabecular changes in the distal femur. Tomographies were directly translated into finite element (FE) models and subjected to a uniaxial compression test. Apparent trabecular stiffness and components of the Von Mises (VM) stress distributions were computed for the distal metaphysis and associated with QTLs. At baseline, five QTLs explained 20% of the variation in trabecular peak stresses across the mouse population. During unloading, three QTLs accounted for 14% of the variability in peak stresses. During reambulation, one QTL accounted for 5% of the variability in peak stresses. QTLs were also identified for mechanically induced changes in stiffness, median stress values and skewness of stress distributions. There was little overlap between QTLs identified for baseline and QTLs for longitudinal changes in mechanical properties, suggesting that distinct genes may be responsible for the mechanical response of trabecular bone. Unloading related QTLs were also different from reambulation related QTLs. Further, QTLs identified here for mechanical properties differed from previously identified QTLs for trabecular morphology, perhaps revealing novel gene targets for reducing fracture risk in individuals exposed to unloading and for maximizing the recovery of trabecular bone's mechanical properties during reambulation.Article Citation - WoS: 30Citation - Scopus: 36Crushing and Energy Absorption Characteristics of Combined Geometry Shells at Quasi-Static and Dynamic Strain Rates: Experimental and Numerical Study(Elsevier Ltd., 2015) Taşdemirci, Alper; Şahin, Selim; Kara, Ali; Turan, Ali KıvançThe quasi-static and dynamic crushing response and the energy absorption characteristics of combined geometry shells composed of a hemispherical cap and a cylindrical segment were investigated both experimentally and numerically. The inelastic deformation of the shells initiated with the inversion of the hemisphere cap and followed by the axisymmetric or diamond folding of the cylindrical segment depending on the loading rate and dimensions. The fracture of the thinner specimens in dynamic tests was ascribed to the rise of the flow stress to the fracture stress with increasing strain rate. The hemisphere cap absorbed more energy at dynamic rates than at quasi-static rates, while it exhibited lower strain rate and inertia sensitivities than the cylinder segment. For both the hemisphere cap and the cylinder segment, the inertial effect was shown to be more pronounced than strain rate effect at increasing impact velocities. © 2014 Elsevier Ltd.Article Citation - WoS: 59Citation - Scopus: 66A Novel Concept of Convertible Roofs With High Transformability Consisting of Planar Scissor-Hinge Structures(Elsevier Ltd., 2010) Akgün, Yenal; Gantes, Charis J.; Kalochairetis, Konstantinos E.; Kiper, GökhanIn this paper, a new adaptive scissor-hinge structure is introduced, which can be converted by means of actuators between a multitude of curvilinear arch-like shapes, where it can be stabilized and carry loads. The key point of this new structure is the proposed Modified Scissor-Like Element (M-SLE). With the development of this element, it becomes possible to change the geometry of the whole system without changing the dimensions of the struts or the span. The proposed scissor-hinge structure discussed here is planar, but it is also possible to combine structures in groups to create spatial systems. After outlining the differences of the proposed structure with existing designs, the dimensional properties of the M-SLE are introduced. Then, geometric principles and shape limitations of the whole structure are explained. Finally, structural analysis of the structure in different geometric configurations is performed, in order to discuss stiffness limitations associated with the advantage of increased mobility. © 2010 Elsevier Ltd.Article Citation - WoS: 16Citation - Scopus: 19A Novel Finite Element Model for Vibration Analysis of Rotating Tapered Timoshenko Beam of Equal Strength(Elsevier Ltd., 2010) Yardımoğlu, BülentA new finite element model based on the coupled displacement field and the tapering functions of the beam is formulated for transverse vibrations of rotating Timoshenko beams of equal strength. In the coupled displacement field, the polynomial coefficients of transverse displacement and cross-sectional rotation are coupled through consideration of the differential equations of equilibrium. The tapering functions of breadth and depth of the beam are obtained from the principle of equal strength in the longitudinal direction of the beam. After finding the displacement functions using the tapering functions, the stiffness and mass matrices are expressed by using the strain and kinetic energy equations. A semi-symbolic computer program in Mathematica is developed and subsequently used to evaluate the new model. The results of the illustrative example regarding the problem indicated in the title of this paper are obtained and compared with the results found from the models created in ABAQUS. Very good agreement is found between the results of new model and the other results. © 2010 Elsevier B.V.Article Citation - WoS: 39Citation - Scopus: 46Finite Element Model for Vibration Analysis of Pre-Twisted Timoshenko Beam(Academic Press Inc., 2004) Yardımoğlu, Bülent; Yıldırım, TolgaA new linearly pre-twisted Timoshenko beam finite element, which has two nodes and four-degrees-of-freedom per node, is developed and subsequently used for coupled bending-bending vibration analysis of pre-twisted beams with uniform rectangular cross-section. First, displacement functions based on two coupled displacement fields (the polynomial coefficients are coupled through consideration of the differential equations of equilibrium) are derived for pre-twisted beams whose flexural displacements are coupled in two planes. This approach helps to reduce the number of nodal variables. Next, the stiffness and mass matrices of the finite element model are obtained by using the energy expressions. Finally, the natural frequencies of pre-twisted Timoshenko beams are obtained and compared with previously published theoretical and experimental results to confirm the accuracy and efficiency of the present model. Excellent agreement is found with the previous studies. Also, the new pre-twisted Timoshenko beam element has good convergence characteristics.