Mechanical Engineering / Makina Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4129
Browse
5 results
Search Results
Conference Object A Numerical Study on the Determination of the Effects of Pore To Throat Size Ratio on the Thermal Dispersion in Porous Media(Begell House, 2014) Özgümüş, Türküler; Mobedi, Moghtada; Özkol, ÜnverDirect pore-level numerical simulations are widely used to estimate macroscopic properties of fluid flow and heat transfer in porous media. Thermal dispersion is one of the most important macroscopic transport parameters for analyzing convective heat transfer in a porous medium. It should be known in order to predict the macroscopic temperature distribution. In the present study, a microscopic scale analysis is performed for a porous medium with periodic structure. A representative elementary volume is chosen from an infinite medium consists of rectangular rods in inline arrangement. The continuity and momentum equations are solved to obtain flow field and the energy equations for fluid and solid phases are solved to obtain microscopic temperature distributions in two phases. There are velocity and temperature deviations between macroscopic and microscopic local values. Volume averaging method is applied to the computed deviations and thermal dispersion conductivity of porous media is determined. The aim of this study is to analyze the effects of pore to throat size ratio on the longitudinal and transverse thermal dispersion in porous media. The study is performed for representative elementary volumes with different pore to throat size ratios and Reynolds numbers from 1 to 100. The study is performed for high porosity porous media (ε = 0.7 and 0.91). It is shown that the porosity and pore to throat size ratio have more influence on the transverse rather than longitudinal thermal dispersion. © 2014, Begell House Inc. All rights reserved.Article Citation - WoS: 1Citation - Scopus: 2Emergence of Taperedducts in Vascular Designs With Laminar and Turbulent Flows(Begell House, 2014) Çetkin, ErdalHere we show that tapered ducts emerge in volumetrically bathed porous materials to decrease the resistance to the flow in laminar and turbulent flow regimes. The fluid enters the volume from one point and it is distributed to the entire volume. After bathing the volume, it is collected and leaves the volume from another point, i.e., two trees matched canopy to canopy. This paper shows that the flow architecture (i.e., design of the void spaces in a porous material) should be changed to obtain the minimum resistance to the flow as its size increases. Tapering the ducts decreases the order of the transition size, i.e., the size for changing from one construct to another to obtain the minimum pressure drop. The decrease in the pressure drop is 16% and 38% with the tapered ducts when the flow is laminar and turbulent, respectively. In addition, the volume ratios and the shape of the tapered ducts are documented. There is no design existing in nature with diameters of constant size in order to distribute and/or collect heat, fluid, and/or stress such as bones, rivers, veins, and tree branches. The emergence of the tapered ducts in designed porous materials is natural.Article Interfacial Convective Heat Transfer for Randomly Generated Porous Media(Begell House, 2018) Uçar, Eren; Mobedi, Moghtada; Ahmadi, AzitaHeat and fluid flow in 20 random porous media is investigated by using the Monte Carlo (MC) procedure. Each porous medium consists of long square rods distributed randomly in flow direction. The continuity, momentum, and energy equations are solved for a row of porous media representing the entire domain of a random porous medium. The microstructure properties of each random porous medium which are the mean and standard deviations of the Voronoi areas, the nearest neighbor distance and orientation are obtained. The rods in the domain are classified into three groups as blocker, active, and passive rods according to their effects on the penetration of heat in porous media. 'The interfacial convective heat transfer coefficients for each rod and entire porous medium are calculated and plotted for different Reynolds numbers. A characteristic length based on the microstructure properties of the generated porous media is defined, and three correlations relating to the upper limit, lower limit, and mean of the overall interfacial convective heat transfer coefficient are proposed.Article Citation - WoS: 6Citation - Scopus: 6A Study on Numerical Determination of Permeability and Inetia Coefficient of Aluminum Foam Using X-Ray Microtomography Techniques: Focus on Inspection Methods for Reliability (permeability and Inertia Coefficient by Tomography)(Begell House, 2019) Mobedi, Moghtada; Nakayama, Akira; Özkol, Ünver; Çelik, HasanThe volume-averaged (i.e., macroscopic) transport properties such as permeability and inertia coefficient of two aluminum foams with 10 and 20 pores per inch (PPI) pore density are found using microtomography images. It is shown that a comparison between the numerical values and the experimental results may not be sufficient to prove the correctness of the obtained results. Hence, in addition to traditional validation methods such as grid independency and comparison with reported results in literature, further inspections such as (a) checking the development of flow, (b) inspection of Darcy and non-Darcy regions, (c) conservation of flow rate through the porous media, (d) sufficiency of number of voxels in the narrow throats, and (e) observation of transverse velocity gradients in pores for high and low Reynolds numbers can be performed to further validate the achieved results. These techniques have been discussed and explained in detail for the performed study. Moreover, the obtained permeability and inertia coefficient values are compared with 19 reported theoretical, numerical, and experimental studies. The maximum deviation between the present results and the reported studies for 10 PPI is below 25%, while for 20 PPI it is below 28%.Conference Object Computational Determination of Volume Averaged Transport Properties of Heat and Fluid Flow in Porous Media by Using Microtomography Images(Begell House, 2017) Çelik, Hasan; Mobedi, Moghtada; Nakayama, Akira; Özkol, ÜnverIn this study, the theory and techniques for obtaining VAM (Volume Average Theory) transport properties of a porous medium from micro-tomography images are described. The validation of the results with reported experimental or numerical values in literature may not be sufficient, hence a comprehensive attention is paid to the techniques that can be used for verification of the obtained numerical results at each step of this long computational process. The suggested verification techniques are categorized and explained in details. © 2017, Begell House Inc. All Rights Reserved.