Mechanical Engineering / Makina Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4129
Browse
6 results
Search Results
Article Citation - WoS: 18Citation - Scopus: 20Cold Plate Enabling Air and Liquid Cooling Simultaneously: Experimental Study for Battery Pack Thermal Management and Electronic Cooling(Elsevier, 2023) Coşkun, Turgay; Çetkin, ErdalThe temperature of cells varies greatly during dis/charge while their performance and lifetime are greatly affected by this fluctuation. Elevated temperatures may yield battery fire due to thermal runaway as well they accelerate ageing and capacity fade of cells. Thermal management systems are a necessity for electric vehicles to extend the lifetime of battery cells and eliminate any fire risks, especially for fast dis/charging applications. Here, we document a hybrid cold plate with a working fluid(s) of sole air or liquid as well as both of them. Hybridization of air and liquid cooling promises to minimize energy consumption requirements during a charge/ discharge cycle by combining the benefits of both thermal management strategies if energy management is controlled accordingly. The temperature of each cell can be kept below 30 degrees C with the proposed hybrid cooling heat exchanger, and the temperature difference between the cells is reduced by 30 % relative to liquid cooling. The maximum temperatures are decreased by 18 % and 3 % in hybrid cooling when compared to air and water cooling, respectively. Furthermore, a step function combining various discharge rates (1C and 3C) was employed in experiments to mimic a realistic situation, i.e. variable C-rate rather than constant. The results show that the temperature of the battery cells can be kept below 30 degrees C with air cooling for variable discharge rate and the effect of contact resistance should not be overlooked for liquid cooling. Furthermore, the possible use of the proposed hybrid cold plates is surveyed in the cooling of electronic devices which produce more and continuous heat than cells. Therefore, three resistance heaters with a capacity of 50W are used in experiments as well. The results show that the proposed cold plates could be used in both electronics cooling and battery thermal management with a control algorithm to switch between sole working fluid and combination modes which could be developed based on the results of this paper.Review Citation - WoS: 13Citation - Scopus: 13A Review on Battery Thermal Management Strategies in Lithium-Ion and Post-Lithium Batteries for Electric Vehicles(Yıldız Technical University, 2023) Güngör, Şahin; Göçmen, Sinan; Çetkin, ErdalElectrification on transportation and electricity generation via renewable sources play a vital role to diminish the effects of energy usage on the environment. Transition from the conven- tional fuels to renewables for transportation and electricity generation demands the storage of electricity in great capacities with desired power densities and relatively high C-rate values. Yet, thermal and electrical characteristics vary greatly depending on the chemistry and struc- ture of battery cells. At this point, lithium-ion (Li-ion) batteries are more suitable in most applications due to their superiorities such as long lifetime, high recyclability, and capacities. However, exothermic electrochemical reactions yield temperature to increase suddenly which affects the degradation in cells, ageing, and electrochemical reaction kinetics. Therefore, strict temperature control increases battery lifetime and eliminates undesired situations such as lay- er degradation and thermal runaway. In the literature, there are many distinct battery thermal management strategies to effectively control battery cell temperatures. These strategies vary based on the geometrical form, size, capacity, and chemistry of the battery cells. Here, we focus on proposed battery thermal management strategies and current applications in the electric vehicle (EV) industry. In this review, various battery thermal management strategies are doc- umented and compared in detail with respect to geometry, thermal uniformity, coolant type and heat transfer methodology for Li-ion and post-lithium batteries.Review Citation - WoS: 103Citation - Scopus: 136Digital Twin of Electric Vehicle Battery Systems: Comprehensive Review of the Use Cases, Requirements, and Platforms(Elsevier, 2023) Naseri, Farshid; Gil, S.; Barbu, C.; Jensen, A. C.; Larsen, P. G.; Gomes, Claudio; Çetkin, Erdal; Yarımca, GülşahTransportation electrification has been fueled by recent advancements in the technology and manufacturing of battery systems, but the industry yet is facing serious challenges that could be addressed using cutting-edge digital technologies. One such novel technology is based on the digital twining of battery systems. Digital twins (DTs) of batteries utilize advanced multi-layer models, artificial intelligence, advanced sensing units, Internet-of-Things technologies, and cloud computing techniques to provide a virtual live representation of the real battery system (the physical twin) to improve the performance, safety, and cost-effectiveness. Furthermore, they orchestrate the operation of the entire battery value chain offering great advantages, such as improving the economy of manufacturing, re-purposing, and recycling processes. In this context, various studies have been carried out discussing the DT applications and use cases from cloud-enabled battery management systems to the digitalization of battery testing. This work provides a comprehensive review of different possible use cases, key enabling technologies, and requirements for battery DTs. The review inclusively discusses the use cases, development/integration platforms, as well as hardware and software requirements for implementation of the battery DTs, including electrical topics related to the modeling and algorithmic approaches, software architec-tures, and digital platforms for DT development and integration. The existing challenges are identified and circumstances that will create enough value to justify these challenges, such as the added costs, are discussed.Article Citation - WoS: 5Citation - Scopus: 7Enhanced Temperature Uniformity With Minimized Pressure Drop in Electric Vehicle Battery Packs at Elevated C-Rates(Wiley, 2022) Güngör, Şahin; Çetkin, ErdalThe trend of transition from fossil fuel to electrification in transportation is a result of no carbon emission produced by electric vehicles (EVs) during their daily operations. Furthermore, the global carbon footprint of EVs can be minimized if the electricity is generated from renewable sources such as wind and solar. On the other hand, there are some drawbacks of these vehicles such as charging time being very long and the mileage range of vehicles not at the desired level. Battery cells are being charged at relatively high C-rates to eliminate these problems, yet high current rates accelerate the aging of batteries and capacity losses due to the generated heat. Generated heat causes overheating, and excess temperature triggers degradation and thermal runaway risks. This paper uncovers how the battery pack temperature uniformity and strict thermal control can be achieved with heat transfer enhancement by conduction (cold plates) and convection (vascular channels). We aimed to reduce the energy consumption of the EV battery pack system while increasing the thermal performance. The impact of the thermal contact resistance is also considered for many realistic scenarios. The results indicate that an integrated system with cold plates and vascular channels satisfies the temperature uniformity requirement (over 81%) with comparatively less pumping power (∼72%) of advanced electric vehicles for relatively high C-rates. Furthermore, findings show the temperature level can increase up to 4°C as thermal contact resistance increases. The proposed cooling technique, which has low cost, easy application, and lower energy consumption superiorities, can be implemented in palpable EV battery packs.Article Citation - WoS: 16Citation - Scopus: 18Thermal and Electrical Characterization of an Electric Vehicle Battery Cell, an Experimental Investigation(Elsevier, 2022) Güngör, Şahin; Çetkin, Erdal; Lorente, SylvieThis paper documents the experimental characterization of a Li-ion battery cell during charging/discharging cyclic operations. The study of the battery cell is conducted in the absence of cooling aid system, and provides thermal and electrical insights. After describing the experimental set-up, the changes in temperature are presented and highlight the nonuniform distribution of the temperature on the battery cell surface. The findings indicate that the maximum temperature difference on the investigated battery cell surface may reach up to 11 C at 3C and 17 ⁰C at 5C, at the end of the discharge in the natural convection case. These changes in space come with temporal variations that are also documented. Voltage curves are provided during charging and discharging operations. The impact of the discharge rate, ambient temperature are then investigated together with the capacity fade after 500 cycles, and results showed that ventilation and low ambient temperatures allow to alleviate the battery capacity fade by 3%.Article Citation - WoS: 83Citation - Scopus: 95Canopy-To Liquid Cooling for the Thermal Management of Lithium-Ion Batteries, a Constructal Approach(Elsevier Ltd., 2022) Güngör, Şahin; Çetkin, Erdal; Lorente, SylvieWith the growing interest on electric vehicles comes the question of the thermal management of their battery pack. In this work, we propose a thermally efficient solution consisting in inserting between the cells a liquid cooling system based on constructal canopy-to-canopy architectures. In such systems, the cooling fluid is driven from a trunk channel to perpendicular branches that make the tree canopy. An opposite tree collects the liquid in such a way that the two trees match canopy-to-canopy. The configuration of the cooling solution is predicted following the constructal methodology, leading to the choice of the hydraulic diameter ratios. We show that such configurations allow extracting most of the non-uniformly generated heat by the battery cell during the discharging phase, while using a small mass flow rate.