Mechanical Engineering / Makina Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4129
Browse
8 results
Search Results
Article Citation - WoS: 1Citation - Scopus: 1Epoxy Matrix Nano Composites: Modulus, Strength and Ductility Enhancement Through Auxeticity of Α-Cristobalite Filler(Elsevier, 2023) Güden, Mustafa; Ülker, Sevkan; Movahedi, NimaThe negative Poisson's ratio (NPR) nano-size ?-Cristobalite particle/epoxy composites were prepared and tensile tested. The elastic modulus and strength of the composites were improved as the particle volume fraction increased from 0 to 0.02. Unlike the conventional particle reinforced composites, the fracture strain increased with the nano ?-Cristobalite addition, an effect which was ascribed to the intrinsic NPR behavior of the filler. © 2023 Elsevier B.V.Article Citation - WoS: 3Citation - Scopus: 3Determination of Activation Energy for Carbon/Epoxy Prepregs Containing Carbon Nanotubes by Differential Scanning Calorimetry(SAGE Publications, 2022) Uz, Yusuf Can; Tanoğlu, MetinThe aim of the present study is the thermal characterization of laboratory-scale carbon fiber/epoxy-based prepregs by incorporating single-wall carbon nanotubes (SWCNTs). Investigation of the cure behavior of a prepreg system is crucial for the characterization and optimization of the fiber reinforced polymeric (FRP) composite. To affect dispersion characteristics, SWCNTs were functionalized by oxidizing their surface with carboxyl (-COOH) group using an acid treatment. The modified resin system contained 0.05, 0.1, and 0.2 wt. % functionalized SWCNTs (F-SWCNTs). Carbon fiber (CF) reinforced prepregs containing various amount of F-SWCNTs were prepared using drum-type winding technique. FTIR was performed to identify new bonding groups formed after the functionalization of SWCNTs. Cure kinetics of prepregs prepared with/without F-SWCNTs were investigated using isoconversional methods.Article Citation - WoS: 59Citation - Scopus: 64Interfacial Thermal Resistance Between the Graphene-Coated Copper and Liquid Water(Elsevier Ltd., 2016) Pham, An T.; Barışık, Murat; Kim, BohungThe thermal coupling at water-solid interfaces is a key factor in controlling thermal resistance and the performance of nanoscale devices. This is especially important across the recently engineered nano-composite structures composed of a graphene-coated-metal surface. In this paper, a series of molecular dynamics simulations were conducted to investigate Kapitza length at the interface of liquid water and nano-composite surfaces of graphene-coated-Cu(1 1 1). We found that Kapitza length gradually increased and converged to the value measured on pure graphite surface with the increase of the number of graphene layers inserted on the Cu surface. Different than the earlier hypothesis on the "transparency of graphene," the Kapitza length at the interface of mono-layer graphene coated Cu and water was found to be 2.5 times larger than the value of bare Cu surface. This drastic change of thermal resistance with the additional of a single graphene is validated by the surface energy calculations indicating that the mono-layer graphene allows only ∼18% van der Waals energy of underneath Cu to transmit. We introduced an "overall interaction strength" value for the nano-composites based the quantitative contribution of pair interaction potentials of each material with water into the total surface energy in each case. Similar to earlier studies, results revealed that Kapitza length shows exponentially variation as a function of the estimated interaction strength of the nano-composite surfaces. The effect of Cu/graphene coupling on thermal behavior between the nano-composite with water was characterized. The Kapitza length was found to decrease significantly with increased Cu/graphene strength in the case of weak coupling, while this behavior becomes negligible with strong coupling of Cu and graphene.Conference Object Citation - Scopus: 1Silver and Zinc Oxide Based Nano Powders and Their Polymer Based Nanocomposites for Antibacterial Application(European Conference on Composite Materials, 2014) Abatay, Ezgi; Özmen, Tuğçe; Arslanoğlu, Alper; Tanoğlu, MetinThe microorganisms cause some serious infections. It is a requirement and a necessity to create sterile fields such as hospital, food processing and public places. Composite stones are one of the main building materials that have been used in buildings due to their high resistant to abrasives, chemicals and mechanical impacts. The silver (Ag), zinc oxide (ZnO), and also nano Ag loaded ZnO (ZnO/Ag) nanopowders have demonsrated capability for the preparation of the polymer based antibacterial nanocomposite materials. In this study, Ag/polyester, ZnO/polyester, Ag/ZnO/polyester and their nanocomposites were prepared and tested with various weight fractions. The microstructure and surface morphology of these nanocomposites were investigated by means of scanning electron microscopy (SEM/EDX). The thermal properties were analyzed by differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). Finally, The antibacterial properties of nanocomposites were analyzed against gram positive (Bacillus subtilis) and gram negative bacteria (Escherichia coli).Conference Object Effect of Blending Conditions on the Properties of Epdm/Organoclay Nanocomposites(IOM Communications Ltd., 2009) Karşal, Çiçek; Tanoğlu, Metin; Odabaş, Sibel; Ersoy, Osman G.; Karakaya, NurselThe effects of blending conditions on the microstructural and mechanical properties of EPDM / organo modified montmorillonite (OMMT) nanocomposites at various clay loadings were investigated. The effects of the processing conditions were manifested in both the morphology and mechanical properties, which showed significant increase when optimized process conditions are applied.Article Citation - WoS: 38Citation - Scopus: 42Layered Clay/Epoxy Nanocomposites: Thermomechanical, Flame Retardancy, and Optical Properties(John Wiley and Sons Inc., 2008) Kaya, Elçin; Tanoğlu, Metin; Okur, SalihIn this study, layered clay/polymer nano-composites were developed based on epoxy resins and montmorillonite as the nanoplatelet reinforcement. Clay particles were treated with hexadecyltrimethylammonium chloride (HTCA) through an ion exchange reaction. In this way, Na+ interlay er cations of the clay is exchanged with onium cation of the surfactant that turns the hydrophilic clays (MMT) to organophilic (OMMT) characteristics. Thermal analysis results revealed that the glass transition temperature (Tg) and the dynamic mechanical properties including the storage and loss modulus of the neat epoxy resin increases by the incorporation of clay particles. It was also found that flame resistance of the polymer is improved by the addition of the clay particles.Article Citation - WoS: 91Citation - Scopus: 113Rheological and Dynamic-Mechanical Behavior of Carbon Nanotube/Vinyl Ester-Polyester Suspensions and Their Nanocomposites(Elsevier Ltd., 2007) Seyhan, Abdullah Tuğrul; Gojny, F. H.; Tanoğlu, Metin; Schulte, K.Rheological properties of vinyl ester-polyester resin suspensions containing various amounts (0.05, 0.1 and 0.3 wt.%) of multi walled carbon nanotubes (MWCNT) with and without amine functional groups (-NH2) were investigated by utilization of oscillatory rheometer with parallel plate geometry. Dispersion of corresponding carbon nanotubes within the resin blend was accomplished employing high shear mixing technique (3-roll milling). Based on the dynamic viscoelastic measurements, it was observed that at 0.3 wt.% of CNT loadings, storage modulus (G′) values of suspensions containing MWCNTs and MWCNT-NH2 exhibited frequency-independent pseudo solid like behavior especially at lower frequencies. Moreover, the loss modulus (G″) values of the resin suspensions with respect to frequency were observed to increase with an increase in contents of CNTs within the resin blend. In addition, steady shear viscosity measurements implied that at each given loading rate, the resin suspensions demonstrated shear thinning behavior regardless of amine functional groups, while the neat resin blend was almost the Newtonian fluid. Furthermore, dynamic mechanical behavior of the nanocomposites achieved by polymerizing the resin blend suspensions with MWCNTs and MWCNT-NH2 was investigated through dynamic mechanical thermal analyzer (DMTA). It was revealed that storage modulus (E′) and the loss modulus (E″) values of the resulting nanocomposites increased with regard to carbon nanotubes incorporated into the resin blend. In addition, at each given loading rate, nanocomposites containing MWCNT-NH2 possessed larger loss and storage modulus values as well as higher glass transition temperatures (Tg) as compared to those with MWCNTs. These findings were attributed to evidences for contribution of amine functional groups to chemical interactions at the interface between CNTs and the resin blend matrix. Transmission electron microscopy (TEM) studies performed on the cured resin samples approved that the dispersion state of carbon nanotubes with and without amine functional groups within the matrix resin blend was adequate. This implies that 3-roll milling process described herein is very appropriate technique for blending of carbon nanotubes with a liquid thermoset resin to manufacture nanocomposites with enhanced final properties.Conference Object Citation - WoS: 39Citation - Scopus: 48Temperature Dependence of Electrical Conductivity in Double-Wall and Multi-Wall Carbon Nanotube/Polyester Nanocomposites(Springer Verlag, 2007) Şimşek, Yılmaz; Özyüzer, Lütfi; Seyhan, Abdullah Tuğrul; Tanoğlu, Metin; Schulte, KarlThe aim of this study is to investigate temperature dependence of electrical conductivity of carbon nanotube (CNT)/polyester nanocomposites from room temperature to 77 K using four-point probe test method. To produce nanocomposites, various types and amounts of CNTs (0.1, 0.3 and 0.5 wt.%) were dispersed via 3-roll mill technique within a specially formulized resin blend of thermoset polyesters. CNTs used in the study include multi walled carbon nanotubes (MWCNT) and double-walled carbon nanotubes (DWCNT) with and without amine functional groups (-NH2). It was observed that the incorporation of carbon nanotubes into resin blend yields electrically percolating networks and electrical conductivity of the resulting nanocomposites increases with increasing amount of nanotubes. However, nanocomposites containing amino functionalized carbon nanotubes exhibit relatively lower electrical conductivity compared to those with non-functionalized carbon nanotubes. To get better interpretation of the mechanism leading to conductive network via CNTs with and without amine functional groups, the experimental results were fitted to fluctuation-induced tunneling through the barriers between the metallic regions model. It was found that the results are in good agreement with prediction of proposed model.