Mechanical Engineering / Makina Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4129
Browse
2 results
Search Results
Now showing 1 - 2 of 2
Article Enhancing trajectory-tracking accuracy of high-acceleration parallel robots by predicting compliant displacements(Cambridge University Press, 2025) Paksoy, Erkan; Dede, Mehmet Ismet Can; Kiper, GokhanFor precision-required robot operations, the robot's positioning accuracy, repeatability, and stiffness characteristics should be considered. If the mechanism has the desired repeatability performance, a kinematic calibration process can enhance the positioning accuracy. However, for robot operations where high accelerations are needed, the compliance characteristics of the mechanism affect the trajectory-tracking accuracy adversely. In this paper, a novel approach is proposed to enhance the trajectory-tracking accuracy of a robot operating at high accelerations by predicting the compliant displacements when there is no physical contact of the robot with its environment. Also, this case study compares the trajectory-tracking characteristics of an over-constrained and a normal-constrained 2degrees-of-freedom (DoF) planar parallel mechanism during high-acceleration operations up to 5 g accelerations. In addition, the influence of the end-effector's center of mass (CoM) position along the normal of the plane is investigated in terms of its effects on the proposed trajectory-enhancing algorithm.Conference Object Kinematic Design of a Novel Finger Exoskeleton Mechanism for Rehabilitation Exercises(Springer international Publishing Ag, 2024) Kiper, Gokhan; Inanc, EmirhanThe paper presents the kinematic design of a novel low-cost two degree-of-freedom finger exoskeleton mechanism to be used for rehabilitation exercises for post-stroke or injured patients. The first degree-of freedom is for the flexion/extension of metacarpophalangeal joint and is achieved via a planar 4-bar loop. The second degree-of-freedom is for the simultaneous flexion/extension of distal/proximal interphalangeal joints and is achieved via an over-constrained double-spherical 6-bar linkage, where 3 of the links are the phalanges of the finger and 2 of the joints are finger joints themselves. So, the number of extra links are less compared to other designs in the literature. The motion of an index finger is recorded via image processing. The four-bar mechanism part is designed for optimum transmission angle characteristics. The formulation and application of the kinematic synthesis of the 6-bar linkage is presented. The design is verified via a prototype.