Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection

Permanent URI for this collectionhttps://hdl.handle.net/11147/7148

Browse

Search Results

Now showing 1 - 6 of 6
  • Article
    Improving Doppler Radar Performance through Optically-Reconfigurable Unequal Power Division with Semi-Analytical Approach
    (Taylor & Francis Ltd, 2025) Karatay, Anil; Atac, Enes; Dinleyici, Mehmet Salih; Yaman, Fatih
    The improvement of the signal-to-noise ratio (SNR) of Doppler radar systems, enabling the detection of targets at greater ranges even with limited power, has been a longstanding focus of research. However, while key limitations such as low target reflectivity and environmental interference are often addressed, the impact of efficient use of the input power remains an overlooked, yet crucial factor in overall sensitivity. Additionally, the power allocation needs to be examined from an analytical perspective for further enhancement. In this study, we present a novel measurement approach, utilizing both semi-analytical analysis and experimental methods, to improve the performance of a dual-antenna CW Doppler radar through the use of an optically reconfigurable unequal microwave power divider which provides well-directed power utilization. Comprehensive grid searches, supported by an analytical approach and considering various loss and noise scenarios, demonstrate the capability of the proposed reconfiguration method. In the Doppler radar experiments where the pendulum and servo motor were used as targets, an SNR increase of 3.04 and 2.11 dB in the radar signal was observed with the proposed method, respectively. This noticeable improvement in the SNR of the time-frequency plots indicates an enhancement in the measurement performance. The unequal power allocation enabled continuous detection of target motion with minimal signal loss, lowering the minimum detectable power level by more than 2 dB compared to the equal power division case. The experimental results show that integrating an optically reconfigurable microwave power divider into the Doppler radar system increases precision in velocity measurements.
  • Article
    Functional Manipulation of Nonspherical Nanoparticles With Cascaded Reconfigurable Modules
    (Elsevier, 2025) Arslanyurek, Seyma; Dinleyici, Mehmet Salih
    Selective nanoparticle sorting is essential for applications requiring monodisperse distributions, yet conventional methods lack adaptability for shape-based separation. This study introduces a reconfigurable optical manipulation technique that dynamically sorts spherical and non-spherical nanoparticles using cascaded modules based on evanescent fields. Optical forces were calculated using the Discrete Dipole Approximation (DDA) method, enabling the modeling of various particle shapes and accurately capturing rotational and translational movements. Two cascaded strategies are proposed: the first approach enables fluid-assisted filtration by selectively trapping spherical particles while allowing non-spherical ones to be carried away by the flow. The second strategy first induces the rotational alignment of particles and then employs a trapping mechanism that selectively retains specific geometries, enabling the separation of spherical and non-spherical nanoparticles. Unlike traditional approaches, this method enables high-precision, shape-selective separation without external flow modifications. The results demonstrate unprecedented control and efficiency in nanoparticle sorting, offering a scalable, high-throughput solution for microfluidic and optofluidic applications.
  • Article
    Citation - WoS: 1
    Citation - Scopus: 1
    Practical and Cost-Effective Approach for Thermal Light Characterization Based on Confined Area Measurements
    (Institute of Electrical and Electronics Engineers Inc., 2025) Atac, Enes; Dinleyici, Mehmet Salih
    Photon statistics and optical coherence measurements are essential in understanding light sources' properties and behaviors. However, the measurement setups require sophisticated detectors with short integration times. Otherwise, the results are indeed time average, which poses a significant challenge, particularly for thermal light sources due to their very short coherence times. In this article, we present a novel, practical, and low-cost measurement procedure for characterizing photon statistics and the second-order coherence function of thermal light using an ordinary charge-coupled device (CCD) camera. We focus on single-pixel analysis through the experiments since measurements of randomly distributed light in a confined region follow Bose-Einstein statistics. This way, the likelihood of averaging during detection is reduced, allowing us to extract statistical information from the spatially distributed intensity values. The outcomes prove the effectiveness of confined area measurements method by overcoming the detector's long exposure time issue.
  • Article
    Citation - WoS: 2
    Citation - Scopus: 2
    Subwavelength Thickness Characterization of Curved Dielectric Films Exploiting Spatially Structured Entangled Photons
    (Optica Publishing Group, 2023) Ataç, Enes; Dinleyici, Mehmet Salih
    Precise determination of thin dielectric film optical properties is a critical issue for fiber optic sensor technologies. However, conventional methods for the optical characterization of these films not only are generally complex and tedious processes on curved surfaces but also require well-calibrated and overly sophisticated devices. We, on the other hand, propose a novel and practical quantum-based phase diffraction scheme to characterize the thickness of ultra-thin transparent dielectric films coated on an optical fiber beyond the classical diffraction limits in this paper. The approach is implemented by evaluating the effect of thickness variations on the highly visible two-photon diffraction pattern's zero crossings and amplitudes. The mathematical model and numerical simulations con-tribute to a better understanding of how the spatially structured entangled photons improve thickness precision with the help of intensity correlations and a confocal aperture. To prove the impact of the proposed system, it is compared with the classical phase diffraction method in the literature via simulations. According to the results, the thickness of the transparent dielectric films can be accurately estimated below one-twentieth of the wavelength of interest. & COPY; 2023 Optica Publishing Group
  • Article
    Citation - WoS: 9
    Citation - Scopus: 9
    Graded-Index Optical Fiber Transverse-Spatial Entanglement
    (American Physical Society, 2020) Ekici, Çağın; Dinleyici, Mehmet Salih
    We present a study of spontaneously arisen spatially entangled photon pairs via intermodal four-wave mixing in a graded-index multimode optical fiber. Unique dispersive features of the fiber allow spectral indistinguishability of two different phase-matched processes, producing entangled pairs of spatial qubits. The bases are realized as superpositions of orthogonal transverse fiber modes having opposite parities. In particular, we take into consideration the spectral properties of the processes by examining their joint spectral amplitudes. It is shown that illuminating graded-index optical fiber with different pump wavelengths has an impact upon efficiency parameters accordingly the degree of spatial entanglement and gives rise to photon pairs with various spectral purities. Photons with higher spectral purity enable desired single-photon based interactions to take place, whereas photons with lower spectral purity exhibit hybrid entanglement in frequency and transverse mode. We also discuss Wigner function formalism and parity-displacement-based realization to characterize spatial properties of the states, as well as to verify quantum entanglement through a violation of Clauser-Horne-Shimony-Holt inequality.
  • Conference Object
    Citation - Scopus: 1
    3-D Switching Fabric Node Design
    (ACTA Press, 2004) Dinleyici, Mehmet Salih; Akın, Osman
    In this work we investigate an all-optical switching node that can be controlled by means of a transient grating, which is formed by interference of two Gaussian beams. This design considers 3-D architecture of switching fabrics.. real profile of Gaussian beams and fast switching time requirements. Four Wave Mixing (FWM) technique is applied in the evanescent field region of waveguide, showing chi((3)) nonlinearity. The formed grating is analysed by standart methods to obtain reflection coefficient and then coupling coefficient for power exchange between waveguides.