Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
450 results
Filters
Settings
Search Results
Article Self-Assembled Peptide Hydrogels with Cell Attachment Motifs for 3D Lung Cancer Model: Evaluation of Cell-Matrix Interactions and Drug Response(John Wiley and Sons Inc, 2026) Sırma Tarım, B.; Tamburaci, S.; Top, A.3D cancer models can mimic the tumor microenvironment, serving as a physiologically relevant platform to investigate the behavior of tumors and test anticancer therapeutics. Although bioactive peptide hydrogels have been widely evaluated for tissue engineering applications, their potential in 3D cancer models has been confirmed in only a few studies. In this study, self-assembling peptide hydrogels containing LDV (IBP1) and LDV and IKVAV cell attachment motifs (IBP2), and the control hydrogel without adhesion units (KLEI) were used for lung cancer modeling. The peptides self-assembled into hydrogels in a cell culture medium with storage moduli of ∼700–1500 Pa. The IBP1 and IBP2 hydrogels enhanced A549 cell proliferation and induced the formation of spheroids with average diameters between ∼70 and ∼150 µm. The cells in KLEI hydrogel with the highest stiffness exhibited mesenchymal-type migration, independent of the cell population, whereas transformation to mesenchymal migration necessitated a specific cell population in the IBP2 hydrogel. The cells in the IBP1 and IBP2 hydrogels with enhanced cell-cell interactions demonstrated higher resistance to docetaxel (DTX). Thus, our results indicate that these bioactive hydrogels can serve as a promising platform for in vitro assessment of cancer mechanisms and drug screening. © 2026 Wiley-VCH GmbH.Article Cryofixation Strategy for Fabrication of Robust Gelatin-Polyester Conductive Biocomposites(Taylor & Francis Inc, 2026) Koksal, Busra; Onder, Ahmet; Yildiz, Umit HakanThe development of mechanically robust and electroconductive biomaterials is critical for advancing tissue engineering strategies, particularly in neural, cardiac and musculoskeletal applications. Here, we report a polycaprolactone (PCL)-gelatin conductive polymer (poly(3,4-ethylenedioxythiophene):polystyrene sulfonate, PEDOT:PSS) biocomposite with tunable mechanical and electrical properties, fabricated via the cryofixation process relying on rapid reaction between isocyanate-terminated PCL, gelatin and PEDOT:PSS. Two isocyanate sources, hexamethylene diisocyanate (HDI) or isophorone diisocyanate (IPDI) were employed to obtain reactive end-functionalized PCLHDI and PCLIPDI. The cryofixation (at -18 degrees C) of PCLHDI or PCLIPDI, gelatin and PEDOT:PSS was found to occur in unfrozen microdomains and enabled the resultant gel with an inherited network of ice, thereby increasing porosity. Electroconductivity was introduced via the incorporation of PEDOT:PSS, yielding conductive cryogels with porous morphology. The resulting scaffolds exhibited a Young's modulus of 637 Pa and electrical conductivity of 197 mu S/cm, alongside biocompatible nature of gelatin-based gels. This multifunctional platform offers significant promise for the engineering of electrically active tissues.Article FW-S3PFCM: Feature-Weighted Safe-Semi Possibilistic Fuzzy C-Means Clustering(Springer, 2026) Khezri, Shirin; Aghazadeh, Nasser; Hashemzadeh, Mahdi; Golzari Oskouei, AminThe safe semi-supervised fuzzy c-means clustering (S3FCM) method is a well-known clustering method that can produce successful results by incorporating prior knowledge of the class distribution. Its process is fast and simple but still has two limitations. The first issue is that it gives equal weight to all data features, while in real-world applications, different features usually have different importance. Secondly, S3FCM is very sensitive to noise and outliers. This paper proposes an extension of the S3FCM, entitled FW-S3PFCM, to mitigate these shortcomings. The proposed method uses a local feature weighting scheme to consider the different feature weights in the clustering process. Additionally, a possibilistic version of the S3FCM is designed to reduce the sensitivity to noise and outliers. The effectiveness of the proposed method is comprehensively evaluated on various benchmark datasets, and its performance is compared with the state-of-the-arts methods. To practically asses the FW-S3FCM, a real-world dataset of brain MRI images and its segmentation performance are analyzed as well. The average Accuracy, F1-score, Sensitivity, and Precision measures obtained by FW-S3FCM are 0.9682, 0.9826, 0.9743, and 0.9925, respectively, which are better than the competitors' performance.Article Alterations in Secondary Lipids Are Associated with Neuroinflammation in the Brain of Neu1-Deficient Mice(Springer, 2026) Ada, Ebru; Seyrantepe, VolkanNeu1 (lysosomal sialidase 1) is essential for removing sialic acid from oligosaccharides and glycoconjugates. Neu1 deficiency impairs lysosomal digestion, leading to sialidosis and sialoglycoprotein accumulation. It also increases lipids, including gangliosides GM3, GD3, GM4, and LM1, in the kidney, liver, and spleen. Neu1-/- mice display symptoms resembling Type II sialidosis, including enlarged spleen and liver, kidney issues, neurological problems, spinal defects, and oligosaccharide buildup. The study examined secondary lipid alterations and inflammation in the cortex and cerebellum of these mice. Lipidomic, molecular, and immunohistochemical analyses of tissues from 2 and 5 M Neu1-/- mice revealed reduced levels of lipids, including PC, PE, PS, and CL, along with increased pro-inflammatory cytokines and loss of oligodendrocytes and neurons. Signs of astrogliosis and microgliosis emerged in specific brain regions. These results indicate that reduced levels of glycerophospholipids could serve as an indicator of inflammation in sialidosis mice. Future research should investigate therapies targeting these lipid changes, as modulating glycerophospholipids might slow disease progression in sialidosis patients.Article Robust Scheduling of Crude Oil Farming and Processing Under Uncertainty(Elsevier, 2026) Yalcin, Damla; Sildir, HasanThe sulphur content in crude oil has a significant impact on refinery operations, influencing the feasibility of crude blending, the distribution of product yields, and overall economic performance. Variations in sulphur content introduce uncertainty in the short-term scheduling of crude oil loading, blending, and distillation processes. This study introduces a scenario-based stochastic optimization framework in which sulphur uncertainty is treated as a central modeling element, represented through a regression-based relationship with specific gravity (SG). The approach systematically propagates uncertainty through blending decisions, crude distillation unit (CDU) feed composition, and product yields. The problem is modeled as a mixed-integer quadratically constrained programming (MIQCP) formulation within a continuous-time scheduling framework, enabling the simultaneous optimization of timing, blending, and processing strategies. The results indicate that increased sulphur uncertainty adversely affects the distribution of yields for nine end-products, resulting in profit losses. These findings underscore the importance of explicitly managing compositional uncertainty and provide insights into cost-performance trade-offs in refinery scheduling.Article Mn2+ Removal From Water Using a Strong Acidic Shallow Shell Resin: Performance and Response Surface Optimization(Springer, 2026) Gucur, G.; Recepoglu, Y. K.; Ozcan, D. O.; Arar, O.The removal of manganese ions (Mn2+) from aqueous solutions using a strong acid cation-exchange resin, Purolite SST60, was investigated in the present study. The influences of resin dosage, temperature, and pH on Mn2(+) removal were optimized using Response Surface Methodology based on a Central Composite Design. Results showed that removal efficiency was highly pH-dependent, increasing from 63% at pH 1.0 to over 99% at pH 3.0 and above. Even with only 0.01 g of resin, 98% removal was achieved, indicating high performance at low dosages. Equilibrium data aligned with the Langmuir isotherm, indicating monolayer sorption with a maximum capacity of 91.06 mg/g. Kinetic data followed a pseudo-second-order model. Thermodynamic analysis confirmed a spontaneous and exothermic process, supported by a negative enthalpy change and positive entropy change, likely due to dehydration of Mn2+ ions upon binding. Competitive ion studies revealed that divalent ions, particularly calcium and magnesium, significantly hinder Mn2+ removal, whereas monovalent ions had minimal impact. Complete desorption of Mn2+ was achieved using hydrochloric or nitric acid at concentrations of 0.5 mol/L and above, confirming the resin's reusability. Overall, Purolite SST60 offers an efficient, regenerable, and robust solution for manganese removal in water treatment applications.Article Triple Helix Spaces: A Tale of Three Helices(Routledge Journals, Taylor & Francis Ltd, 2025) Kose, Suheda; Elburz, Zeynep; Velibeyoglu, Koray; Oner, Asli CeylanIn recent years, the Triple Helix model has gained prominence within academic circles. This study, situated in the field of city planning, aims to clarify the model's theoretical foundations, evaluate its measurement techniques, and explore the relationship between the Triple Helix and urban space. By examining 231 Triple Helix-related publications from the past 40 years (up to 12 July 2024, sourced from the Web of Science Core Collection), we propose a framework of three distinct generations for understanding Triple Helix spaces in urban contexts. The first-generation Triple Helix space is characterized by direct interactions among the three primary actors: university, industry, and government. The second-generation expands on this by including multiple interactions among the three main actors and their facilitators. The third-generation involves the circular interaction of multiple second-generation Triple Helix spaces. Across these generations, the study provides a lens for analyzing innovative urban spaces through Triple Helix interactions and offers practical approaches for examining the Triple Helix spaces. The findings also contribute to the theoretical foundation for the sustainable development of such spaces.Article Mass Spectrometric Profiling Reveals Alterations in N-Glycans and O-Glycans in Tay-Sachs Disease Under Autophagy-Induced Conditions(Springer, 2025) Can, Melike; Basirli, Hande; Jin, Chunsheng; Karlsson, Niclas G.; Bojar, Daniel; Seyrantepe, VolkanTay-Sachs disease is a rare neurodegenerative disorder caused by mutations in the HEXA gene. The HEXA gene encodes the alpha-subunit of the enzyme beta-hexosaminidase A, which degrades GM2 ganglioside. Previously, we identified impaired autophagy in the brains of a mouse model of Tay-Sachs disease, which exhibited neuropathological and clinical abnormalities. Moreover, we demonstrated autophagosome clearance in Tay-Sachs cells under lithium-induced conditions. Here, we further aimed to evaluate N- and O-glycan changes in these cells and examine whether glycan alterations are linked to ER stress. The profiles of N- and O-glycans were analyzed using LC-MS/MS in fibroblasts and neuroglial cells from 5-month-old Hexa-/-Neu3-/- mice and neuroglial cells from Tay-Sachs patients under lithium induction and nutrient deprivation. The expression levels of ER stress-related markers were assessed using qRT-PCR and Western blot analyses. We demonstrated higher levels of high mannose and lower levels of complex types of N-glycans, along with increased O-glycan levels in Tay-Sachs cells. Compared to control groups, we observed upregulated expression of endoplasmic reticulum (ER) stress-related markers, CHOP and ATF-6, in Tay-Sachs cells. Our study demonstrated that autophagy induction causes the degradation of accumulated high-mannose N-glycans and O-glycans, which is associated with the downregulation of ER stress-related genes in Tay-Sachs cells. Our study is the first to show this phenomenon in Tay-Sachs cells and suggests the presence of ER stress-mediated autophagy. Therefore, targeting glycans through autophagy induction could offer therapeutic benefits to patients with Tay-Sachs disease in future studies.Article Development of Self-Assembled Peptide Hydrogels Containing Matrix-Metalloproteinase Degradable Motifs for 3D Lung Cancer Models(Royal Society of Chemistry, 2026) Tarim, Burcu Sirma; Tamburaci, Sedef; Top, AybenHydrogel-forming peptides, including matrix metalloproteinase (MMP)-degradable motifs, have been employed to investigate cell-extracellular matrix interactions in vitro. However, their potential in 3D cancer models has been explored only in a few studies. In this study, we used modified MMP-2 degradable motifs (VSLRA or ASLRA) in the design of EDP1 (RVSLRADARVSLRADA) and EDP2 (RASLRADARASLRADA) peptide hydrogelators. The peptides self-assembled into nanofibrillar hydrogels with storage moduli between similar to 300 and similar to 400 Pa. MMP-2 degradation properties of the peptides were confirmed, and a slightly higher MMP-2 responsiveness of the EDP1 hydrogel was observed. The hydrogels were used in the encapsulation of A549 lung adenocarcinoma cancer cells and MRC-5 human lung fibroblast cells. The designed hydrogels supported the proliferation of these cells with high viability and induced cluster formation of encapsulated A549 cells similar to that observed with the RADA hydrogel. However, the hydrogel network structure affected the morphology of the migrated cells in the absence of curcumin. The addition of curcumin decreased the migration and invasion of A549 cells, resulting in a round cell morphology independent of the hydrogel matrices. Anticancer drug tests indicated that cell viability after drug treatment was higher in the 3D hydrogels than in 2D cultures. It was also confirmed that the combinational therapy of doxorubicin and curcumin decreased the cell proliferation and colonization to a greater extent compared to doxorubicin monotherapy. Thus, the hydrogels developed in this study can be used for 3D cancer models or other tissue engineering applications as an alternative to the RADA hydrogel by exploiting the MMP-2 degradation properties.Article Enhanced Osteoconductive Properties of Quince Seed Hydrocolloid-Based Composite Scaffolds Enriched With Bioactive Glass for Bone Tissue Engineering(Wiley-VCH Verlag GmbH, 2025) Yilmaz-Dagdeviren, Hilal Deniz; Zheng, Kai; Boccaccini, Aldo Roberto; Arslan Yildiz, AhuBioactive composite scaffolds enhance osteoconduction and mineralization, offering potential for bone regeneration. In this study, polysaccharide-based Quince Seed Hydrocolloid (QSH) was combined with Gelatin (Gel), mesoporous bioactive glass nanoparticles (MBGNs), and 45S5 bioactive glass (BG) to fabricate osteoconductive scaffolds. QSH/Gel/BG and QSH/Gel/MBGN composites were characterized for chemical composition, mechanical behavior, and in vitro bioactivity. FTIR and SEM-elemental mapping confirmed homogeneous bioactive glass incorporation. BET analysis revealed a >3-fold increase in surface area for MBGN-containing scaffolds compared to BG and pristine QSH/Gel samples, attributed to the nanoscale mesoporous structure of MBGNs. Swelling tests showed a hydrophilic nature in all scaffolds, with MBGN composites exhibiting the highest swelling ratio (2094 +/- 571%), nearly twice that of BG composites (1105 +/- 56%). Compression tests indicated similar elastic moduli for MBGN and BG containing scaffolds (2330 and 2140 Pa). Human osteosarcoma cell cultures (28 days) demonstrated high viability (>70%) and osteoconductive response in all composites. Alizarin Red staining and SEM mapping revealed greater mineral accumulation in MBGN-containing scaffolds (Ca/P: 2.53). Overall, both composites supported a 3D osteoconductive microenvironment, while MBGN scaffolds exhibited superior long-term cell viability and mineralization potential, emphasizing their suitability for bone tissue engineering applications.