Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
3 results
Search Results
Book Part Calcium Soap Lubricants(CRC Press, 2015) İzer, Alaz; Kahyaoğlu, Tuğçe Nefise; Balköse, DevrimThe reparation and characterization of calcium stearate (CaSt2) and a lubricant by using calcium stearate were aimed at in this study. Calcium stearate powder was prepared from sodium stearate and calcium chloride by precipitation from aqueous solutions. CaSt2 and the Light Neutral Base oil were mixed together to obtain lubricating oil. It was found that CaSt2 had a melting temperature of 142.8 °C and in base oil it had a lower melting point, above 128 °C. It was dispersed as lamellar micelles as the optical micrographs had shown. From rate of settling the size of dispersed particles were found to be 1.88 µm and 0.11 µm for lubricants having 1% and 2% CaSt2, respectively. The friction coefficient and wear scar diameter of base oil 0.099 and 1402 nm were reduced to 0.0730 and 627.61 nm respectively for the lubricant having 1% CaSt2. Lower wear scar diameter (540 nm) was obtained for lubricant with 2% CaSt2. CaSt2 improved the lubricating property of the base oil but did not improve its oxidative and thermal stability. © 2015 by Apple Academic Press, Inc.Article Citation - WoS: 8Citation - Scopus: 8Study of Boron Doped Amorphous Silicon Lightly Hydrogenated Prepared by Dc Magnetron Sputtering for Infrared Detectors Applications(Elsevier Ltd., 2020) Ketroussi, K.; Cherfi, R.; Yahia, Seba, H.; Tata, S.; Chabane, L.; Özyüzer, Lütfi; Rahal, A.The objective of this study is to investigate the effect of boron doping concentration on the bolometric properties of lightly hydrogenated amorphous silicon doped with boron (a-Si: H(B)) films. Thin film a-Si: H(B) samples with different boron concentrations are prepared by co-sputtering of boron and silicon at relatively low hydrogen pressure. FTIR analyses show that the intensity of the characteristic peak of the substitutional boron gradually increases with the addition of boron. Increasing in boron concentration affects the bolometric properties of the lightly hydrogenated a-Si: H (B) films, including conductivity at room temperature (?RT) and thermal resistance coefficient (TCR). Indeed, when the boron concentration increases from 1.5 to 43%, ?RT increases from 1.4 10?6 to 2 10?3 ??1 cm?1 while the absolute value of TCR decreases from 3% to 8% K?1, respectively. In addition, lightly hydrogenated a-Si: H (B) films exhibit good thermal stability. We have showed in this study that lightly hydrogenated a-Si: H(B) can be considered as a potential candidate for low-cost, high-performance uncooled micro bolometers. © 2020 Elsevier B.V.Book Part Calcium Soap Lubricants(Apple Academic Press, 2015) İzer, Alaz; Kahyaoğlu, Tuğçe Nefise; Balköse, DevrimThe reparation and characterization of calcium stearate (CaSt2) and a lubricant by using calcium stearate were aimed at in this study. Calcium stearate powder was prepared from sodium stearate and calcium chloride by precipitation from aqueous solutions. CaSt2 and the Light Neutral Base oil were mixed together to obtain lubricating oil. It was found that CaSt2 had a melting temperature of 142.8 °C and in base oil it had a lower melting point, above 128 °C. It was dispersed as lamellar micelles as the optical micrographs had shown. From rate of settling the size of dispersed particles were found to be 1.88 ?m and 0.11 ?m for lubricants having 1% and 2% CaSt2, respectively. The friction coefficient and wear scar diameter of base oil 0.099 and 1402 nm were reduced to 0.0730 and 627.61 nm respectively for the lubricant having 1% CaSt2. Lower wear scar diameter (540 nm) was obtained for lubricant with 2% CaSt2. CaSt2 improved the lubricating property of the base oil but did not improve its oxidative and thermal stability. © 2015 by Apple Academic Press, Inc.