Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection

Permanent URI for this collectionhttps://hdl.handle.net/11147/7148

Browse

Filters

2022 - 20232

Settings

Access Right: Embargoed AccessAuthor: search.filters.author.Zeinali Heris, Saeed

Search Results

Now showing 1 - 2 of 2
  • Article
    Citation - WoS: 29
    Citation - Scopus: 33
    The Effect of Heat Transfer Characteristics of Macromolecule Fouling on Heat Exchanger Surface: a Dynamic Simulation Study
    (Wiley, 2023) Karimi Shoar, Zahra; Pourpasha, Hadi; Zeinali Heris, Saeed; Mousavi, Seyed Borhan; Mohammadpourfard, Mousa
    At the city gate gas pressure reduction stations (CGSs), to prevent natural gas from forming a hydrate in the throttle valve, the natural gas is heated by the heater before reaching the pressure relief valve. Heat exchangers are an essential component of industrial processes that contribute significantly to total system energy. Since the element impacting heat exchanger performance is the fouling process, all fouling processes and models were dynamically simulated in this study. Through coding in the C++ language and simultaneous use of fluent functions, or, in other words, user-defined function (UDF), fouling-related models were defined for this software. The dynamic simulation was performed, and parameters such as fouling strength and layer thickness were calculated. The effects of changing operating conditions, such as gas inlet velocity, surface temperature, and fouling species concentration on fouling growth, were also evaluated. As the concentration of fouling species increased, the fouling rate also increased. The amount of supersaturation and fouling rate increased as the surface temperature increased. Due to the operational limitations of the system, to reduce the fouling rate, the gas inlet velocity should be as high as possible, and the fluid inlet temperature, surface temperature, and concentration of fouling species should be as low as possible. In this study, the required time to reach the efficiency of 70% of the heat exchanger was calculated using the modelling of this chamber, which was equivalent to 190 days. Additionally, the critical thickness of the fouling layer at this time was 3.5 cm.
  • Article
    Citation - WoS: 71
    Citation - Scopus: 78
    Investigation of H2o2/Uv Advanced Oxidation Process on the Removal Rate of Coliforms From the Industrial Effluent: a Pilot-Scale Study
    (Elsevier, 2022) Ashrafivala, Meisam; Mousavi, Seyed Borhan; Zeinali Heris, Saeed; Heidari, Mohammad; Mohammadpourfard, Mousa; Aslani, Hassan
    Wastewater recycling and reuse is very important, specially in countries with water shortage problem. Disinfection is very crucial step of wastewater treatment, particulary from the reuse and environmental protection point of view. In this research, the efficiency of the advanced oxidation process using UV and H2O2 combination was investigated on fecal coliform (FC) inactivation from a real industrial effluent; furthermore, the optimal condition for disinfection of the effluent using various parameters such as pH, H2O2 concentration, and contact time was determined. Based on the acquired outcomes, by pH decline from 11 to 7 and 3 inactivation rate increased (6.7% and 20.9%, sequentially), indicating the efficacy of acidic condition on the process. Increasing H2O2 concentration from 5 mg/L to 15 mg/L, 25 mg/L, and 35 mg/L, was led to increase FC inactivation by 16.6%, 29.75%, and 36.33%, respectively. Considering contcat time impact on the process performance, our findings revealed that the best efficiency obtained after 40 (s) contact time. It can be concluded that the combined UV/H2O2 is more potent than single UV and H2O2 process, making it possible to reach irrigation standards.