Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
18 results
Search Results
Article Citation - Scopus: 2Application of Endurance Time Method in Seismic Assessment of Rc Frames Designed by Direct Displacement-Based Procedure(Turkish Chamber of Civil Engineers, 2024) Karımzada, Nisar Ahmad; Shırkhanı, Amir; Aktaş, EnginThis paper addresses the Direct Displacement-Based Design (DDBD) approach of multi-story RC frame structures consistent with changes to design criteria between Turkish earthquake codes of TSC-2007 and TBEC-2018. The corresponding response modification factor (R) of structures designed based on the DDBD approach is also estimated in this research. The design base shear forces of both codes are compared considering different R factors and also with that of the DDBD approach. The results showed that the DDBD approach, as per TBEC-2018, provides RC frame structures with higher R values compared to the similar approach in accordance with TSC-2007. The Endurance Time (ET) method is a time history-based procedure for seismic assessment of structures under intensifying dynamic excitations aided to judge their performance at various intensity levels. Since, up to now, the ET method has not been considered to evaluate the performance of the structures designed by the DDBD approach, this paper addresses this issue. The ET performance curves of RC frames show that structures designed by the DDBD approach in accordance with TBEC-2018 exhibit higher Interstory Drift Ratios (IDRs) values than TSC-2007 at various hazard levels.Article Citation - WoS: 7Citation - Scopus: 7Investigating the Effects of Pa66 Electrospun Nanofibers Layered Within an Adhesive Composite Joint Fabricated Under Autoclave Curing(American Chemical Society, 2023) Esenoğlu, Gözde; Tanoğlu, Metin; Barışık, Murat; İplikçi, Hande; Yeke, Melisa; Nuhoğlu, Kaan; Türkdoğan, Ceren; Martin, Seçkin; Aktaş, Engin; Dehneliler, Serkan; Gürbüz, Ahmet Ayberk; İriş, Mehmet ErdemEnhancing the performance of adhesively joined composite components is crucial for various industrial applications. In this study, polyamide 66 (PA66) nanofibers produced by electrospinning were coated on unidirectional carbon/epoxy prepregs to increase the bond strength of the composites. Carbon/epoxy prepregs with/without PA66 nanofiber coating on the bonding region were fabricated using the autoclave, which is often used in the aerospace industry. The single lap shear Charpy impact energy and Mode-I fracture toughness tests were employed to examine the effects of PA66 nanofibers on the mechanical properties of the joint region. Scanning electron microscopy (SEM) was used to investigate the nanofiber morphology and fracture modes. The thermal characteristics of Polyamide 66 nanofibers were explored by using differential scanning calorimetry (DSC). We observed that the electrospun PA66 nanofiber coating on the prepreg surfaces substantially improves the joint strength. Results revealed that the single lap shear and Charpy impact strength values of the composite joint are increased by about 79 and 24%, respectively, by coating PA66 nanofibers onto the joining region. The results also showed that by coating PA66 nanofibers, the Mode-I fracture toughness value was improved by about 107% while the glass transition temperature remained constant.Article Citation - WoS: 3Citation - Scopus: 5Helenistik Kulelerde Yanal Yüke İlişkin Düzlem İçi ve Düzlem Dışı Duvar Davranışının Duvar Profilleri ve Açıklık Düzenlerine Bağlı Olarak İncelenmesi(Gazi Üniversitesi, 2020) Gençer, Funda; Turan, Mine; Aktaş, EnginDry masonry wall profiles constructed without using bonding material between blocks are encountered in different building types dated to Greek, Hellenistic and Roman periods. Depending on development of earthquake experiences, dry masonry wall profiles vary in terms of wall thickness, number of layers, relationship of layers and size, form, organization and relationship of blocks. In this study, the construction details increasing the structural strength in watch towers constructed in Hellenistic Period are aimed to be determined. This study is limited with investigation of effect of wall profiles and opening organizations on in-plane and out-of-plane wall behaviors under lateral loading. Primarily, wall profiles and opening types of dry masonry towers in ancient Caria, Pamphylia and Cilicia regions, that have not lost authenticity and integrity or had information about their authentic form, were documented. By using gathered data, hypothetic towers with different wall profiles and opening types are designed. To determine in-plane and out-of-plane wall behavior of hypothetic towers, simulation of quasi-static tilt analysis based on equilibrium were carried out, and form changes at walls and collapse angles of towers were identified. Wall profile and opening properties effecting on structural strength under lateral loading were determinedd.Article Citation - WoS: 3Citation - Scopus: 3Structural Vulnerability of Ancient Dry Masonry Towers Under Lateral Loading(Elsevier, 2020) Gençer, Funda; Hamamcıoğlu Turan, Mine; Turan, Mine; Aktaş, Engin; Aktaş, EnginUnderstanding how the original characteristics contribute to the structural behaviour of antique structures should be the initial stage of planning for conservation work. This study aims to identify the structural behaviour of dry masonry towers under lateral loadings, so that the decision-making process when determining their restoration can be adequately supported. Dry masonry towers in ancient Caria, Pamphylia, and Cilicia Regions are examined. Each of these three areas have very different seismic characteristics. A hypothetical testing process was designed by combining different characteristics from each of the towers. As a result, the characteristics affecting the structural resistance were determined as; the staggering ratio, the stone depth, the ratio between block length and height, the proportional relationship between height and length, the area, number and position of openings, and the distribution of header stones. These characteristics all interact together to determine the failure mechanism; so, understanding this interaction is critical when considering conservation. © 2020 Elsevier LtdArticle Citation - Scopus: 4Betonarme Çerçeve Yapıların Olasılıklı Sismik Analizi(Gazi Üniversitesi, 2006) Korkmaz, Armağan; Aktaş, EnginBetonarme çerçeve yapıların sismik davranışlarının belirlenmesinde, analizlere olasılıklı ifadelerin dahil edilmesi, sismik davranışın daha gerçekçi tanımlanmasına yardımıcı olacaktır. Çalışmada betonarme çerçeve yapıların olasılıklı sismik analizlerinin gerçekleştirilmesi amaçlanmış, bu amaçla örnek betonarme çerçeve yapılar ele alınmıştır. Bu betonarme çerçeve yapılar için öteleme analizleri DRAIN 2D programı ile yapılmıştır. Öteleme analizlerinin ardından zaman tanım alanında dinamik analizler gerçekleştirilmiştir. Öteleme analizleri, zaman tanım alanında dinamik analiz sonuçları ile karşılaştırılmıştır. Bu karşılaştırmanın ardından kırılganlık analizleri yapılmıştır. Betonarme çerçeve yapıların olasılıklı sismik davranışını ortaya koymak amacı ile kırılganlık analizleri ile kırılganlık eğrileri elde edilmiştir. Çalışmanın ana amacı, öteleme analizleri ile zaman tanım alanında dinamik analizlerin karşılaştırılması sonucu, daha gerçekçi bir sismik davranış tanımlama ihtiyacının olduğunu göstermek ve kırılganlık analizleri ile, sismik davranışın olasılıklı olarak daha gerçekçi bir şekilde ifadesini sağlayabilmektir.Conference Object Citation - WoS: 1Citation - Scopus: 2Structural Comparison of Scissor-Hinge Linkages(CRC Press, 2019) Maden, Feray; Akgün, Yenal; Yücetürk, Kutay; Aktaş, Engin; Yar Uncu, Müjde; Mitropoulou, C.Deployable structures can deploy from a compact to an expanded configuration by changing their sizes. The behaviors of these structures depend on some parameters such as geometric shape, member sizes and kinematic properties. To provide the deployment, not only the arrangements of structural members but also some restrictions must be considered. Moreover, contiguous members of the structures must let the large rotations to provide the transformation between different geometric forms from fully folded to fully deployed configurations. These requirements have an important impact on the fundamental properties of the structures related with structural performance, such as stiffness and strength. In this paper, stiffness of different scissor-hinge linkages are analyzed and compared. These linkages cover the same span with almost the same geometry and have the unit elements with same size and same weight. However, the geometry of unit elements is different from each other. The paper investigates the effect of this difference on the stiffness of whole system. © 2019 Taylor & Francis Group, London.Article Citation - WoS: 40Citation - Scopus: 37Investigation of Interlayer Hybridization Effect on Burst Pressure Performance of Composite Overwrapped Pressure Vessels With Load-Sharing Metallic Liner(SAGE Publications, 2020) Kangal, Serkan; Kartav, Osman; Tanoğlu, Metin; Aktaş, Engin; Artem, Hatice SeçilIn this study, multi-layered composite overwrapped pressure vessels for high-pressure gaseous storage were designed, modeled by finite element method and manufactured by filament winding technique. 34CrMo4 steel was selected as a load-sharing metallic liner. Glass and carbon filaments were overwrapped on the liner with a winding angle of [+/- 11 degrees/90 degrees(2)](3) to obtain fully overwrapped composite reinforced vessel with non-identical front and back dome endings. The vessels were loaded with increasing internal pressure up to the burst pressure level. The mechanical performances of pressure vessels, (i) fully overwrapped with glass fibers and (ii) with additional two carbon hoop layers on the cylindrical section, were investigated by both experimental and numerical approaches. In numerical approaches, finite element analysis was performed featuring a simple progressive damage model available in ANSYS software package for the composite section. The metal liner was modeled as elastic-plastic material. The results reveal that the finite element model provides a good correlation between experimental and numerical strain results for the vessels, together with the indication of the positive effect on radial deformation of the COPVs due to the composite interlayer hybridization. The constructed model was also able to predict experimental burst pressures within a range of 8%. However, the experimental and finite element analysis results showed that hybridization of hoop layers did not have any significant impact on the burst pressure performance of the vessels. This finding was attributed to the change of load-sharing capacity of composite layers due to the stiffness difference of carbon and glass fibers.Article Citation - WoS: 16Citation - Scopus: 24Developing Polymer Composite-Based Leaf Spring Systems for Automotive Industry(Walter de Gruyter GmbH, 2018) Öztoprak, Nahit; Güneş, Mehmet Deniz; Tanoğlu, Metin; Aktaş, Engin; Eğilmez, Oğuz Özgür; Şenocak, Çiler; Kulaç, GedizComposite-based mono-leaf spring systems were designed and manufactured to replace existing mono-leaf metal leaf spring in a light commercial vehicle. In this study, experimentally obtained mechanical properties of different fiber-reinforced polymer materials are presented first, followed by the description of the finite element analytical model created in Abaqus 6.12-1 (Dassault Systemes Simulia Corp., RI, US) using the obtained properties. The results from the finite element analysis are presented next and compared with actual size experimental tests conducted on manufactured prototypes. The results demonstrated that the reinforcement type and orientation dramatically influenced the spring rate. The prototypes showed significant weight reduction of about 80% with improved mechanical properties. The hybrid composite systems can be utilized for composite-based leaf springs with considerable mechanical performance.Article Citation - WoS: 15Citation - Scopus: 16A Mode Shape Assembly Algorithm by Using Two Stage Bayesian Fast Fourier Transform Approach(Academic Press Inc., 2019) Hızal, Çağlayan; Turan, Gürsoy; Aktaş, Engin; Ceylan, HasanOperational modal analysis may require identifying global modal shapes by using multiple setup measurements. For this purpose, various algorithms have been developed which make use of the Bayesian approach to estimate the global mode shapes. The main motivation of the available Bayesian approaches is based on the estimation of the optimal global mode shape vector directly from Fast Fourier Transform data or assembling the local mode shapes that are identified in the individual setups by using Gaussian approximation. In this study, the two-stage Bayesian Fast Fourier Transform Approach which is originally applied to single setups is implemented to multiple setup problems for well separated modes. Analytically it is shown that the resulting formulation is the same for the mode shape assembly by using the Gaussian approximation. In addition, the weights of individual setups in the global mode shape vector is analytically calculated which depend on the Hessian matrix for local mode shapes. To validate the proposed methodology, a numerical example that considers setup-to-setup variability of modal signal-noise ratios is presented. For comparison purposes a ten-story shear frame model is experimentally investigated, and the measurements of a benchmark bridge structure are considered in the verification of the current procedure. (C) 2019 Elsevier Ltd. All rights reserved.Conference Object Citation - Scopus: 1Development of Composite Drive Shaft Tube for Automotive Industry(Applied Mechanics Laboratory, 2019) Arslan Özgen, Gizem; Tanoğlu, Metin; Aktaş, Engin; Yücetürk, KutayWeight, vibration, fatigue, and critical speed limitations have been recognized as serious problems in drive shafts in automotive industry for many years. Conventional drive shaft is made up into two parts to increase its fundamental natural bending frequency. This present work deals with the replacement of conventional steel drive shaft with a composite counterparts. The benefits of eliminating the two piece shafts are significant reductions in weight, noise, vibration and harshness. In this work, one-piece propeller shaft composed of carbon/epoxy and glass/epoxy composites have been designed and manufactured for a rear wheel drive automobile. The performance measures are static torque transmission capability, torsional buckling and the fundamental natural bending frequency. The tubular composite shaft samples are being manufactured by using filament winding technique. To predict the torsional properties, fatigue life and failure modes of composite tubes for different fiber orientation angle and stacking sequence, finite element analysis (FEA) has been used. The predicted and experimental values has been reported for comparison. The next phase of work consists of optimization of shaft for the objective function as weight and fundamental natural frequency considering different stacking sequence and fiber orientation. © CCM 2020 - 18th European Conference on Composite Materials. All rights reserved.